
The AirTAC GAFR Adjustable Filter Regulator GAFR200N06LTK is a genuine two-in-one filter & regulator — a diversion-type water/particulate filter and a balanced pressure regulator built into ONE body. It has 1/8" ports, a 40 µm filter element and regulates 0.15 - 0.4 MPa (20 - 58 psi). It has no lubricator, so it adds no oil to the airflow.
The GAFR200N06LTK is a filter and regulator combined into a single body, eliminating the need for separate GAF and GAR units. It delivers air filtered to 40 um and regulated to 0.15-0.4 MPa (20-58 psi) through its 1/8in port, with a nylon bowl and a reverse-flow valve fitted.
This lower-pressure model weighs 290 g and has a 25 cc drain bowl. The diversion structure spins incoming air to separate liquid water and solid particles, while the balanced regulator holds the outlet steady as supply pressure varies. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac GAFR Adjustable Filter Regulator GAFR200N06LTK |
|---|---|
| Series | GAFR200 filter & regulator |
| Port size | 1/8" (NPT thread) |
| Filtering grade | 40 µm |
| Pressure range | 0.15 - 0.4 MPa (20 - 58 psi) |
| Type | Lower pressure |
| Bowl material | Nylon |
| Drain type | Semi-auto drain + manual drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 25 cc |
| Bracket | Included |
| Weight | 290 g |
Specifications follow the official AirTAC GAFR catalogue (pages 235-236). Air must not freeze in the unit. The fitted circular gauge reads in psi / bar, set by the NPT thread code. This unit filters and regulates only; it does not add lubrication.
| GAFR200 | GA200 series filter & regulator — sets the port range, drain-bowl capacity and weight. |
|---|---|
| N | Bowl material: Nylon. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 06 | Port size 1/8". This body offers 06 = 1/8", 08 = 1/4". |
| (blank) | Drain: Semi-auto drain + manual drain. |
| L | Lower pressure type — 0.15 - 0.4 MPa (20 - 58 psi). This body offers Standard (S) or Lower pressure (L). |
| (blank) | Mounting bracket included. |
| (blank) | Circular pressure gauge fitted. |
| (blank) | Filtering grade 40 µm. |
| T | NPT thread; gauge scale psi / bar. |
| K | Reverse-flow (reflux) valve attached. |
The filter and the regulator are ONE body here — there is no separate GAF filter or GAR regulator part to assemble. Need lubrication downstream too? Add a lubricator by ordering the matching GAFC200-06 F.R.L. combination instead.
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAFR200 · 1/8" · curve to 2000 L/min |
|---|---|
| One size up | GAFR300 (curve to 3500 L/min) |
| Add a lubricator | GAFC200-06 (F.R.L. combination) |
Feed a small clamping jig on a bench assembly station, where the lower 0.4 MPa ceiling prevents over-forcing delicate fixtures.
Supply a regulated air line for blow-off guns and small hand tools in a repair shop, with the 25 cc bowl checked at shift end.
Provide clean, stable air to a laboratory test fixture that requires gentle pressure, with the 40 um element protecting sensitive orifices.
Choose this GAFR200 when your application needs filtered, regulated air at a modest flow rate, with the 1/8in port suiting small jigs or single actuators. The nylon bowl offers a build choice without changing the common 1.0 MPa (145 psi) maximum pressure or -5 to 70 C temperature range. This unit includes a mounting bracket and a circular gauge with an MPa/psi scale, and the semi-auto plus manual drain suits attended lines. The 40 um element handles general shop air, while the fitted reverse-flow valve is an ordering difference to note. If oil is needed downstream, order the matching GAFC200-06 combination instead. A 1.0 MPa max supply leaves about 0.6 MPa above the 0.4 MPa top of the range.
Quick checklist
This is a filter and regulator only — it delivers filtered, pressure-set air with no added oil. If a downstream tool needs lubrication, add a separate lubricator or order the GAFC200-06 combination; do not expect an oil mist from this unit.
The GAFR200N06LTK has a pressure range of 0.15-0.4 MPa (20-58 psi), a maximum pressure of 1.0 MPa (145 psi), and a proof pressure of 1.5 MPa (215 psi). Its operating temperature range is -5 to 70 C, it has a 25 cc drain bowl, and it weighs 290 g.
The reverse-flow (reflux) valve is fitted as an ordering difference on this model. Its specific function is detailed in the catalogue's referenced page, but it is an integral part of this unit's configuration.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.