
The AirTAC GAFR Adjustable Filter Regulator GAFR200N06SJNTK is a genuine two-in-one filter & regulator — a diversion-type water/particulate filter and a balanced pressure regulator built into ONE body. It has 1/8" ports, a 40 µm filter element and regulates 0.15 - 0.9 MPa (20 - 130 psi). It has no lubricator, so it adds no oil to the airflow.
The GAFR200N06SJNTK is a genuine AirTAC filter & regulator combining both functions in a single body - no separate parts to assemble. This 1/8in port unit handles 0.15-0.9 MPa (20-130 psi) with a 40 um element, and its nylon bowl holds 25 cc of condensate.
With a 290 g mass, this compact size class suits small jigs or single actuators. The semi-auto plus manual drain gives you both automatic purging and a manual override, while the reverse-flow valve is fitted as an ordering difference. No gauge is supplied; the 1/8in gauge connection is ready if you add one later. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac GAFR Adjustable Filter Regulator GAFR200N06SJNTK |
|---|---|
| Series | GAFR200 filter & regulator |
| Port size | 1/8" (NPT thread) |
| Filtering grade | 40 µm |
| Pressure range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Type | Standard |
| Bowl material | Nylon |
| Drain type | Semi-auto drain + manual drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 25 cc |
| Bracket | Not included (J) |
| Weight | 290 g |
Specifications follow the official AirTAC GAFR catalogue (pages 235-236). Air must not freeze in the unit. No gauge is supplied with this model — the gauge connection on a GAFR200 is 1/8" if you add one. This unit filters and regulates only; it does not add lubrication.
| GAFR200 | GA200 series filter & regulator — sets the port range, drain-bowl capacity and weight. |
|---|---|
| N | Bowl material: Nylon. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 06 | Port size 1/8". This body offers 06 = 1/8", 08 = 1/4". |
| (blank) | Drain: Semi-auto drain + manual drain. |
| S | Standard type — 0.15 - 0.9 MPa (20 - 130 psi). This body offers Standard (S) or Lower pressure (L). |
| J | No bracket (J) — supplied without the mounting bracket. |
| N | No pressure gauge; 1/8" gauge connection. |
| (blank) | Filtering grade 40 µm. |
| T | NPT thread; gauge scale psi / bar. |
| K | Reverse-flow (reflux) valve attached. |
The filter and the regulator are ONE body here — there is no separate GAF filter or GAR regulator part to assemble. Need lubrication downstream too? Add a lubricator by ordering the matching GAFC200-06 F.R.L. combination instead.
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAFR200 · 1/8" · curve to 2000 L/min |
|---|---|
| One size up | GAFR300 (curve to 3500 L/min) |
| Add a lubricator | GAFC200-06 (F.R.L. combination) |
Feed a single pneumatic clamp or fixture with the 1/8in port and 290 g body. The 25 cc bowl handles condensate from typical shop air, and the semi-auto drain purges automatically while allowing manual checks.
Use on a test bench where a compact filter-regulator is needed for one device. The nylon bowl resists the occasional knock, and the reverse-flow valve is fitted as an ordering difference - no need to source it separately.
Mount on a maintenance cart or wall panel for quick air preparation at a single work point. The no-bracket (J) option lets you use existing mounting holes, and the 40 um element keeps hand tools running clean.
Choose the GAFR200 for 1/8in or 1/4in ports - the lightest body in the series at 290 g, with a 25 cc drain bowl. The nylon bowl (N) is a build choice; the standard 40 um element handles general shop air, while the 5 um (W) option traps finer particles. This model has the semi-auto plus manual drain (blank), no bracket (J), and no gauge (N) - the 1/8in connection is there for a future gauge. The NPT thread gives an MPa/psi scale, and the reverse-flow (reflux) valve is fitted per the K code.
If your line needs oil downstream, order the matching GAFC200-06 combination instead. For a larger flow envelope, step up to the GAFR300 with its 3500 L/min curve at 0.7 MPa inlet. Note that 1.0 MPa max supply leaves about 0.1 MPa above the 0.9 MPa top of the range, so plan your inlet pressure near the maximum for full regulation.
Quick checklist
This is a filter and regulator only — it delivers filtered, pressure-set air with no added oil. If a downstream tool needs lubrication, add a separate lubricator or order the GAFC200-06 combination; do not expect an oil mist from this unit.
Working pressure is 0.15-0.9 MPa (20-130 psi), max pressure 1.0 MPa (145 psi), proof pressure 1.5 MPa (215 psi). Temperature range is -5 to 70 C. The drain bowl holds 25 cc and the unit weighs 290 g. It has a 1/8in port, 40 um element, nylon bowl, semi-auto plus manual drain, no gauge, and no bracket.
The N after the port code means no gauge is supplied - the 1/8in gauge connection is there if you add one. The J code omits the mounting bracket, which suits panel mounts or existing bracket setups. Both options reduce the initial cost when you already have these components in place.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.