
The AirTAC GAFR Adjustable Filter Regulator GAFR200N06SNWT is a genuine two-in-one filter & regulator — a diversion-type water/particulate filter and a balanced pressure regulator built into ONE body. It has 1/8" ports, a 5 µm filter element and regulates 0.15 - 0.9 MPa (20 - 130 psi). It has no lubricator, so it adds no oil to the airflow.
The GAFR200N06SNWT is a compact filter and regulator combined into one 290 g body with a 1/8in port, saving rail space versus separate units. It filters incoming air through a 5 um element and regulates pressure from 0.15-0.9 MPa (20-130 psi) with a balanced mechanism that resists drift.
This unit has a nylon bowl and a 25 cc condensate chamber, with both semi-auto and manual drains fitted. There is no gauge supplied, but the 1/8in gauge connection allows easy addition. It handles max 1.0 MPa (145 psi) and operates from -5 to 70 C, though it must not freeze. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac GAFR Adjustable Filter Regulator GAFR200N06SNWT |
|---|---|
| Series | GAFR200 filter & regulator |
| Port size | 1/8" (NPT thread) |
| Filtering grade | 5 µm |
| Pressure range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Type | Standard |
| Bowl material | Nylon |
| Drain type | Semi-auto drain + manual drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 25 cc |
| Bracket | Included |
| Weight | 290 g |
Specifications follow the official AirTAC GAFR catalogue (pages 235-236). Air must not freeze in the unit. No gauge is supplied with this model — the gauge connection on a GAFR200 is 1/8" if you add one. This unit filters and regulates only; it does not add lubrication.
| GAFR200 | GA200 series filter & regulator — sets the port range, drain-bowl capacity and weight. |
|---|---|
| N | Bowl material: Nylon. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 06 | Port size 1/8". This body offers 06 = 1/8", 08 = 1/4". |
| (blank) | Drain: Semi-auto drain + manual drain. |
| S | Standard type — 0.15 - 0.9 MPa (20 - 130 psi). This body offers Standard (S) or Lower pressure (L). |
| (blank) | Mounting bracket included. |
| N | No pressure gauge; 1/8" gauge connection. |
| W | Filtering grade 5 µm. |
| T | NPT thread; gauge scale psi / bar. |
| (blank) | No reverse-flow valve. |
The filter and the regulator are ONE body here — there is no separate GAF filter or GAR regulator part to assemble. Need lubrication downstream too? Add a lubricator by ordering the matching GAFC200-06 F.R.L. combination instead.
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAFR200 · 1/8" · curve to 2000 L/min |
|---|---|
| One size up | GAFR300 (curve to 3500 L/min) |
| Add a lubricator | GAFC200-06 (F.R.L. combination) |
Feed a single pneumatic jig or fixture with 5 um filtered air at stable pressure, ensuring consistent clamping force for small part assembly.
Supply a small bench-mounted press or air tool with regulated air, using the semi-auto drain for easy maintenance in a workshop setting.
Protect sensitive lab valves or instruments with fine 5 um filtration and steady pressure, ideal for low-flow test setups.
Choose this GAFR200 for small jigs or single actuators needing clean, regulated air at 1/8in ports. The nylon bowl suits applications where weight matters, while the 5 um element traps finer particles than the standard 40 um for precision equipment. Both semi-auto and manual drains are included for flexible condensate removal, and the mounting bracket comes standard. The NPT thread matches MPa/psi gauge scales, and no gauge is fitted initially. If oil lubrication is needed downstream, order the matching GAFC200-06 combination instead. For sizing, note that 1.0 MPa max supply leaves about 0.1 MPa above the 0.9 MPa top of the range.
Quick checklist
This is a filter and regulator only — it delivers filtered, pressure-set air with no added oil. If a downstream tool needs lubrication, add a separate lubricator or order the GAFC200-06 combination; do not expect an oil mist from this unit.
This filter & regulator has a 1/8in port, working pressure 0.15-0.9 MPa (20-130 psi), max pressure 1.0 MPa (145 psi), proof pressure 1.5 MPa (215 psi), and temperature range -5 to 70 C. It has a 25 cc drain bowl, weighs 290 g, uses a 5 um element, and has a nylon bowl with semi-auto and manual drains.
The N after the port code means no gauge is supplied. The 1/8in gauge connection is present, so you can add a compatible gauge later. Without one, the set pressure cannot be read directly, which may be fine for fixed-pressure applications.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.