
The AirTAC GAFR Adjustable Filter Regulator GAFR30010ALJNWT is a genuine two-in-one filter & regulator — a diversion-type water/particulate filter and a balanced pressure regulator built into ONE body. It has 3/8" ports, a 5 µm filter element and regulates 0.15 - 0.4 MPa (20 - 58 psi). It has no lubricator, so it adds no oil to the airflow.
The GAFR30010ALJNWT is a filter and regulator combined into a single body, saving space and reducing potential leak points compared to separate units. It handles 3/8in ports and delivers a lower pressure range of 0.15-0.4 MPa (20-58 psi), with a 5 um element for fine filtration.
The unit weighs 500 g and features a 60 cc condensate bowl. Its automatic drain expels water without manual intervention, making it suitable for unattended operation. The balanced regulator mechanism helps maintain a steady outlet pressure as supply varies. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac GAFR Adjustable Filter Regulator GAFR30010ALJNWT |
|---|---|
| Series | GAFR300 filter & regulator |
| Port size | 3/8" (NPT thread) |
| Filtering grade | 5 µm |
| Pressure range | 0.15 - 0.4 MPa (20 - 58 psi) |
| Type | Lower pressure |
| Bowl material | PC |
| Drain type | Automatic drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 60 cc |
| Bracket | Not included (J) |
| Weight | 500 g |
Specifications follow the official AirTAC GAFR catalogue (pages 235-236). Air must not freeze in the unit. No gauge is supplied with this model — the gauge connection on a GAFR300 is 1/8" if you add one. This unit filters and regulates only; it does not add lubrication.
| GAFR300 | GA300 series filter & regulator — sets the port range, drain-bowl capacity and weight. |
|---|---|
| (blank) | Bowl material: PC. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 10 | Port size 3/8". This body offers 08 = 1/4", 10 = 3/8", 15 = 1/2". |
| A | Drain: Automatic drain. |
| L | Lower pressure type — 0.15 - 0.4 MPa (20 - 58 psi). This body offers Standard (S) or Lower pressure (L). |
| J | No bracket (J) — supplied without the mounting bracket. |
| N | No pressure gauge; 1/8" gauge connection. |
| W | Filtering grade 5 µm. |
| T | NPT thread; gauge scale psi / bar. |
| (blank) | No reverse-flow valve. |
The filter and the regulator are ONE body here — there is no separate GAF filter or GAR regulator part to assemble. Need lubrication downstream too? Add a lubricator by ordering the matching GAFC300-10 F.R.L. combination instead.
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAFR300 · 3/8" · curve to 3500 L/min |
|---|---|
| One size down | GAFR200 |
| One size up | GAFR400 (curve to 7000 L/min) |
| Add a lubricator | GAFC300-10 (F.R.L. combination) |
Feed a 3/8in line to a precision clamping fixture where a stable, low pressure of 0.15-0.4 MPa is required. The 5 um element protects sensitive air pilot valves from fine particulates.
Supply instrument air to a laboratory bench with the automatic drain handling condensate quietly. The lower pressure range suits delicate pneumatic actuators used in test setups.
Use on a light assembly station where a compact, 500 g unit with a 3/8in port is needed. The automatic drain reduces maintenance in a line with intermittent moisture.
This GAFR300 model with 3/8in ports sits between the smaller GAFR200 and larger GAFR400 in capacity. The 5 um element traps finer particles than the standard 40 um, which is better for sensitive equipment but requires more frequent servicing. The automatic drain (A) is ideal for wet or remote lines, while the lower pressure type (L) caps output at 0.4 MPa. This unit ships without the mounting bracket (J) and without a gauge (N); the 1/8in gauge connection is available if you add one later. For lines needing lubrication downstream, order the GAFC300-10 combination instead. With a 1.0 MPa max supply, you have about 0.6 MPa of headroom above the 0.4 MPa regulated top.
Quick checklist
This is a filter and regulator only — it delivers filtered, pressure-set air with no added oil. If a downstream tool needs lubrication, add a separate lubricator or order the GAFC300-10 combination; do not expect an oil mist from this unit.
It operates at 0.15-0.4 MPa (20-58 psi), with a max pressure of 1.0 MPa (145 psi) and proof pressure of 1.5 MPa (215 psi). Temperature range is -5 to 70 C. The drain bowl holds 60 cc and the unit weighs 500 g. It uses a 5 um element and has an automatic drain.
The 'N' code means no gauge is fitted, leaving a 1/8in connection if you add one. The 'J' code omits the mounting bracket, which is useful for panel mounting or when using an existing bracket. Both reduce cost and weight for installations where they are not needed.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.