
The AirTAC GAFR Adjustable Filter Regulator GAFR30010ALJT is a genuine two-in-one filter & regulator — a diversion-type water/particulate filter and a balanced pressure regulator built into ONE body. It has 3/8" ports, a 40 µm filter element and regulates 0.15 - 0.4 MPa (20 - 58 psi). It has no lubricator, so it adds no oil to the airflow.
The GAFR30010ALJT is a filter & regulator in one body, combining a diversion filter that spins out liquid water and solid particles with a balanced pressure regulator that holds a steady outlet. It has no lubricator and only one bowl, the 60 cc condensate drain bowl, weighing 500 g.
This unit operates in the lower-pressure band of 0.15-0.4 MPa (20-58 psi) with a 40 um element and a fitted circular gauge reading MPa/psi. The pressed-in self-locking knob resists drift from vibration, keeping the set pressure stable on moving equipment. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac GAFR Adjustable Filter Regulator GAFR30010ALJT |
|---|---|
| Series | GAFR300 filter & regulator |
| Port size | 3/8" (NPT thread) |
| Filtering grade | 40 µm |
| Pressure range | 0.15 - 0.4 MPa (20 - 58 psi) |
| Type | Lower pressure |
| Bowl material | PC |
| Drain type | Automatic drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 60 cc |
| Bracket | Not included (J) |
| Weight | 500 g |
Specifications follow the official AirTAC GAFR catalogue (pages 235-236). Air must not freeze in the unit. The fitted circular gauge reads in psi / bar, set by the NPT thread code. This unit filters and regulates only; it does not add lubrication.
| GAFR300 | GA300 series filter & regulator — sets the port range, drain-bowl capacity and weight. |
|---|---|
| (blank) | Bowl material: PC. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 10 | Port size 3/8". This body offers 08 = 1/4", 10 = 3/8", 15 = 1/2". |
| A | Drain: Automatic drain. |
| L | Lower pressure type — 0.15 - 0.4 MPa (20 - 58 psi). This body offers Standard (S) or Lower pressure (L). |
| J | No bracket (J) — supplied without the mounting bracket. |
| (blank) | Circular pressure gauge fitted. |
| (blank) | Filtering grade 40 µm. |
| T | NPT thread; gauge scale psi / bar. |
| (blank) | No reverse-flow valve. |
The filter and the regulator are ONE body here — there is no separate GAF filter or GAR regulator part to assemble. Need lubrication downstream too? Add a lubricator by ordering the matching GAFC300-10 F.R.L. combination instead.
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAFR300 · 3/8" · curve to 3500 L/min |
|---|---|
| One size down | GAFR200 |
| One size up | GAFR400 (curve to 7000 L/min) |
| Add a lubricator | GAFC300-10 (F.R.L. combination) |
Feed a bank of precision pneumatic valves on a small assembly station where the lower 0.4 MPa ceiling prevents over-pressurizing delicate actuators.
Supply clean, regulated air to a benchtop test fixture that cycles at low pressure, using the automatic drain to shed condensate without manual checks.
Mount inside a tight control cabinet for a single-station machine, where the no-bracket design saves space and the 500 g weight suits a light frame.
Choose this GAFR300 for 3/8" lines where a compact 500 g body with a 60 cc drain bowl fits tight panels. The automatic drain (A) handles wet or unattended lines, while the omitted bracket (J) suits existing mountings or panel-mount setups. The lower-pressure type (L) tops out at 0.4 MPa, so confirm your machine never needs more than that. The PC bowl and 40 um element are standard; upgrade to a 5 um element or nylon bowl if needed, and add a reverse-flow valve with the K option if specified. If oil is required downstream, order the matching GAFC300-10 combination instead. The 1.0 MPa max supply leaves about 0.6 MPa above the 0.4 MPa top of the range, so plan your inlet pressure accordingly.
Quick checklist
This is a filter and regulator only — it delivers filtered, pressure-set air with no added oil. If a downstream tool needs lubrication, add a separate lubricator or order the GAFC300-10 combination; do not expect an oil mist from this unit.
The GAFR30010ALJT is a filter & regulator with a 3/8" port, lower-pressure range of 0.15-0.4 MPa (20-58 psi), max pressure of 1.0 MPa (145 psi), proof pressure of 1.5 MPa (215 psi), temperature range of -5 to 70 C, drain bowl capacity of 60 cc, and weight of 500 g. It has a 40 um element, automatic drain, no bracket, and a fitted gauge.
The L type limits regulation to 0.15-0.4 MPa for applications needing low, stable pressure, while the J code omits the mounting bracket for panel-mount or existing brackets. Together they suit compact, low-pressure setups where the standard 0.9 MPa ceiling is unnecessary.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.