
The AirTAC GAFR Adjustable Filter Regulator GAFR30010ALNTK is a genuine two-in-one filter & regulator — a diversion-type water/particulate filter and a balanced pressure regulator built into ONE body. It has 3/8" ports, a 40 µm filter element and regulates 0.15 - 0.4 MPa (20 - 58 psi). It has no lubricator, so it adds no oil to the airflow.
The GAFR30010ALNTK is a filter and regulator combined into a single body, so it cleans incoming air and stabilizes outlet pressure without needing separate units. This model uses a 3/8in port, a lower-pressure range of 0.15-0.4 MPa (20-58 psi), and a 40 um element, with no gauge fitted.
Its 60 cc condensate bowl collects water and solids separated by the internal diversion structure. The automatic drain clears accumulated liquid without manual intervention, and the included mounting bracket simplifies installation. The reverse-flow valve is fitted as an ordering difference, and the unit weighs 500 g. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac GAFR Adjustable Filter Regulator GAFR30010ALNTK |
|---|---|
| Series | GAFR300 filter & regulator |
| Port size | 3/8" (NPT thread) |
| Filtering grade | 40 µm |
| Pressure range | 0.15 - 0.4 MPa (20 - 58 psi) |
| Type | Lower pressure |
| Bowl material | PC |
| Drain type | Automatic drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 60 cc |
| Bracket | Included |
| Weight | 500 g |
Specifications follow the official AirTAC GAFR catalogue (pages 235-236). Air must not freeze in the unit. No gauge is supplied with this model — the gauge connection on a GAFR300 is 1/8" if you add one. This unit filters and regulates only; it does not add lubrication.
| GAFR300 | GA300 series filter & regulator — sets the port range, drain-bowl capacity and weight. |
|---|---|
| (blank) | Bowl material: PC. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 10 | Port size 3/8". This body offers 08 = 1/4", 10 = 3/8", 15 = 1/2". |
| A | Drain: Automatic drain. |
| L | Lower pressure type — 0.15 - 0.4 MPa (20 - 58 psi). This body offers Standard (S) or Lower pressure (L). |
| (blank) | Mounting bracket included. |
| N | No pressure gauge; 1/8" gauge connection. |
| (blank) | Filtering grade 40 µm. |
| T | NPT thread; gauge scale psi / bar. |
| K | Reverse-flow (reflux) valve attached. |
The filter and the regulator are ONE body here — there is no separate GAF filter or GAR regulator part to assemble. Need lubrication downstream too? Add a lubricator by ordering the matching GAFC300-10 F.R.L. combination instead.
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAFR300 · 3/8" · curve to 3500 L/min |
|---|---|
| One size down | GAFR200 |
| One size up | GAFR400 (curve to 7000 L/min) |
| Add a lubricator | GAFC300-10 (F.R.L. combination) |
Feed a single pneumatic jig or fixture that needs stable low pressure for delicate clamping, where the 0.4 MPa ceiling prevents over-force.
Supply instrument air to a lab bench or test station that requires consistent 0.15-0.4 MPa output, with automatic draining for long test cycles.
Power a small conveyor stop or light-duty actuator on an assembly line, using the 3/8in port to match existing tubing and the 500 g weight for easy mounting.
Choose the GAFR30010ALNTK when you need a compact filter-regulator with a 3/8in port and a lower pressure ceiling of 0.4 MPa. The automatic drain suits unattended lines, while the 40 um element handles standard filtration needs. The PC bowl is the default build, and the included bracket means you can mount it directly. Since no gauge is supplied, the 1/8in gauge connection allows adding one later if you need to read set pressure. If your line requires oil downstream, order the matching GAFC300-10 combination instead. Note that 1.0 MPa max supply leaves about 0.6 MPa above the 0.4 MPa top of the range, so plan your inlet pressure accordingly.
Quick checklist
This is a filter and regulator only — it delivers filtered, pressure-set air with no added oil. If a downstream tool needs lubrication, add a separate lubricator or order the GAFC300-10 combination; do not expect an oil mist from this unit.
The GAFR30010ALNTK has a pressure range of 0.15-0.4 MPa (20-58 psi), a maximum pressure of 1.0 MPa (145 psi), and a proof pressure of 1.5 MPa (215 psi). It operates from -5 to 70 C and must not freeze. The drain bowl holds 60 cc, and the unit weighs 500 g. It uses a 40 um element and has an automatic drain.
The K code indicates the reverse-flow (reflux) valve is fitted, which is an ordering difference from standard models. The N code means no gauge is supplied, so you cannot read the set pressure without adding one to the 1/8in gauge connection. This configuration is chosen when you need the reflux valve and prefer to mount your own gauge.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.