
The AirTAC GAFR Adjustable Filter Regulator GAFR30010ALNWT is a genuine two-in-one filter & regulator — a diversion-type water/particulate filter and a balanced pressure regulator built into ONE body. It has 3/8" ports, a 5 µm filter element and regulates 0.15 - 0.4 MPa (20 - 58 psi). It has no lubricator, so it adds no oil to the airflow.
The GAFR30010ALNWT is a filter and pressure regulator combined into a single body, so the incoming air is cleaned and then set to a steady outlet pressure without needing two separate units. This model uses a 3/8in port, a 5 um element, and an automatic drain, with a working range of 0.15-0.4 MPa (20-58 psi) for lower-pressure circuits.
The diversion structure spins the air to drop liquid water and solid particles into the 60 cc condensate bowl, while the balanced regulator holds the set pressure as supply varies. At 500 g, this GAFR300 body is a compact mid-range unit that suits machine sub-assemblies where space is limited. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac GAFR Adjustable Filter Regulator GAFR30010ALNWT |
|---|---|
| Series | GAFR300 filter & regulator |
| Port size | 3/8" (NPT thread) |
| Filtering grade | 5 µm |
| Pressure range | 0.15 - 0.4 MPa (20 - 58 psi) |
| Type | Lower pressure |
| Bowl material | PC |
| Drain type | Automatic drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 60 cc |
| Bracket | Included |
| Weight | 500 g |
Specifications follow the official AirTAC GAFR catalogue (pages 235-236). Air must not freeze in the unit. No gauge is supplied with this model — the gauge connection on a GAFR300 is 1/8" if you add one. This unit filters and regulates only; it does not add lubrication.
| GAFR300 | GA300 series filter & regulator — sets the port range, drain-bowl capacity and weight. |
|---|---|
| (blank) | Bowl material: PC. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 10 | Port size 3/8". This body offers 08 = 1/4", 10 = 3/8", 15 = 1/2". |
| A | Drain: Automatic drain. |
| L | Lower pressure type — 0.15 - 0.4 MPa (20 - 58 psi). This body offers Standard (S) or Lower pressure (L). |
| (blank) | Mounting bracket included. |
| N | No pressure gauge; 1/8" gauge connection. |
| W | Filtering grade 5 µm. |
| T | NPT thread; gauge scale psi / bar. |
| (blank) | No reverse-flow valve. |
The filter and the regulator are ONE body here — there is no separate GAF filter or GAR regulator part to assemble. Need lubrication downstream too? Add a lubricator by ordering the matching GAFC300-10 F.R.L. combination instead.
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAFR300 · 3/8" · curve to 3500 L/min |
|---|---|
| One size down | GAFR200 |
| One size up | GAFR400 (curve to 7000 L/min) |
| Add a lubricator | GAFC300-10 (F.R.L. combination) |
Feed a bank of precision pneumatic valves that require a stable, lower supply pressure, with the 5 um element protecting fine internal passages from particle wear.
Mount this 500 g unit on a small machine frame or panel to supply a single actuator or a small clamping circuit, where the included bracket simplifies installation.
Use it ahead of sensitive instrumentation that needs 5 um filtration and a regulated pressure below 0.4 MPa, with the automatic drain handling condensate in a wet line.
Choose the GAFR300 body when you need a 3/8in port and a 60 cc drain bowl, which is larger than the 25 cc bowl on the GAFR200 for less frequent draining. The L type sets the regulated range to 0.15-0.4 MPa (20-58 psi), so confirm the downstream equipment never needs more than 0.4 MPa. The 5 um element traps finer particles than the standard 40 um for sensitive valves, though it will need more frequent service. An automatic drain is fitted, so condensate is expelled without manual attention. The mounting bracket is included, and no gauge is supplied, but the 1/8in gauge connection is ready for one. If oil is needed downstream, order the matching GAFC300-10 combination instead. Max supply 1.0 MPa leaves about 0.6 MPa above the 0.4 MPa top of the range.
Quick checklist
This is a filter and regulator only — it delivers filtered, pressure-set air with no added oil. If a downstream tool needs lubrication, add a separate lubricator or order the GAFC300-10 combination; do not expect an oil mist from this unit.
The GAFR30010ALNWT is a filter & regulator with a 3/8in port, a 0.15-0.4 MPa (20-58 psi) regulated range, a 5 um element, and an automatic drain. Maximum supply pressure is 1.0 MPa (145 psi), proof pressure is 1.5 MPa (215 psi), and the operating temperature is -5 to 70 C. The drain bowl holds 60 cc and the unit weighs 500 g.
The L code sets the regulated range to 0.15-0.4 MPa (20-58 psi) instead of the standard 0.15-0.9 MPa. This suits applications that only need a low, stable pressure, but if the machine may ever require more than 0.4 MPa, the standard S type is the correct choice.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.