
The AirTAC GAFR Adjustable Filter Regulator GAFR30010ALTK is a genuine two-in-one filter & regulator — a diversion-type water/particulate filter and a balanced pressure regulator built into ONE body. It has 3/8" ports, a 40 µm filter element and regulates 0.15 - 0.4 MPa (20 - 58 psi). It has no lubricator, so it adds no oil to the airflow.
The GAFR30010ALTK is a filter and regulator combined into a single body, so the incoming air is cleaned and then set to a steady outlet pressure without needing separate units. This 3/8in version has a lower-pressure regulator spanning 0.15-0.4 MPa (20-58 psi), a 40 um element, and an automatic drain that clears the 60 cc condensate bowl by itself.
The pressed-in self-locking knob resists drift from vibration, and the balanced mechanism holds the outlet steady as supply pressure varies. A circular gauge with MPa/psi scale is fitted, and the reverse-flow (reflux) valve is attached. This unit does not lubricate; if oil is needed downstream, order the matching GAFC300-10 combination instead. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac GAFR Adjustable Filter Regulator GAFR30010ALTK |
|---|---|
| Series | GAFR300 filter & regulator |
| Port size | 3/8" (NPT thread) |
| Filtering grade | 40 µm |
| Pressure range | 0.15 - 0.4 MPa (20 - 58 psi) |
| Type | Lower pressure |
| Bowl material | PC |
| Drain type | Automatic drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 60 cc |
| Bracket | Included |
| Weight | 500 g |
Specifications follow the official AirTAC GAFR catalogue (pages 235-236). Air must not freeze in the unit. The fitted circular gauge reads in psi / bar, set by the NPT thread code. This unit filters and regulates only; it does not add lubrication.
| GAFR300 | GA300 series filter & regulator — sets the port range, drain-bowl capacity and weight. |
|---|---|
| (blank) | Bowl material: PC. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 10 | Port size 3/8". This body offers 08 = 1/4", 10 = 3/8", 15 = 1/2". |
| A | Drain: Automatic drain. |
| L | Lower pressure type — 0.15 - 0.4 MPa (20 - 58 psi). This body offers Standard (S) or Lower pressure (L). |
| (blank) | Mounting bracket included. |
| (blank) | Circular pressure gauge fitted. |
| (blank) | Filtering grade 40 µm. |
| T | NPT thread; gauge scale psi / bar. |
| K | Reverse-flow (reflux) valve attached. |
The filter and the regulator are ONE body here — there is no separate GAF filter or GAR regulator part to assemble. Need lubrication downstream too? Add a lubricator by ordering the matching GAFC300-10 F.R.L. combination instead.
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAFR300 · 3/8" · curve to 3500 L/min |
|---|---|
| One size down | GAFR200 |
| One size up | GAFR400 (curve to 7000 L/min) |
| Add a lubricator | GAFC300-10 (F.R.L. combination) |
Feed a precision pneumatic valve or a small instrument loop that requires a stable, lower pressure supply. The balanced regulator holds the setpoint as line pressure fluctuates, and the 40 um element protects the valve internals from particle wear.
Supply a laboratory air bench where a gentle, regulated pressure is needed for experiments or test fixtures. The automatic drain keeps the 60 cc bowl from overflowing during long unattended runs, and the gauge lets operators verify the set pressure at a glance.
Power a small assembly station that uses low-pressure air for light clamping or part positioning. The 3/8in port and 500 g body fit neatly into a compact frame, while the self-locking knob holds the setting despite nearby machine vibration.
Choose this GAFR30010ALTK when you need a 3/8in filter-regulator with a lower 0.15-0.4 MPa range and an automatic drain for unattended lines. The PC bowl and 40 um element suit general shop air, while the included bracket simplifies mounting. The fitted gauge shows MPa/psi, and the reflux valve is present as an ordering difference. For a higher flow ceiling, step up to a GAFR400 with its 7000 L/min envelope at 0.7 MPa inlet; for lighter duty, the GAFR200 offers a 2000 L/min curve. If lubrication is required downstream, the matching GAFC300-10 adds that function. Note that 1.0 MPa max supply leaves about 0.6 MPa above the 0.4 MPa top of the range, so this unit suits applications that never need more than that regulated ceiling.
Quick checklist
This is a filter and regulator only — it delivers filtered, pressure-set air with no added oil. If a downstream tool needs lubrication, add a separate lubricator or order the GAFC300-10 combination; do not expect an oil mist from this unit.
The GAFR30010ALTK is a filter-regulator with a 3/8in port, a lower-pressure range of 0.15-0.4 MPa (20-58 psi), and a maximum supply of 1.0 MPa (145 psi). Proof pressure is 1.5 MPa (215 psi), and the operating temperature is -5 to 70 C. It has a 60 cc drain bowl, weighs 500 g, and uses a 40 um element. The automatic drain clears condensate without manual intervention.
The K indicates a reverse-flow (reflux) valve is fitted to the GAFR30010ALTK. This is an ordering difference from models without the K code. The catalogue does not detail its function in our data, so treat it as a specified option for your application.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.