
The AirTAC GAFR Adjustable Filter Regulator GAFR30010ALWTK is a genuine two-in-one filter & regulator — a diversion-type water/particulate filter and a balanced pressure regulator built into ONE body. It has 3/8" ports, a 5 µm filter element and regulates 0.15 - 0.4 MPa (20 - 58 psi). It has no lubricator, so it adds no oil to the airflow.
The GAFR30010ALWTK is a filter and regulator combined into one compact body, eliminating the need for separate GAF and GAR units. It delivers air cleaned of water and solid particles, then regulates it to a steady outlet pressure within the lower 0.15-0.4 MPa (20-58 psi) band, with a 5 um element for finer filtration.
This 3/8in port model weighs 500 g and features a 60 cc condensate bowl, with an automatic drain for unattended operation. The balanced regulator mechanism holds the set pressure steady as supply varies, and the pressed-in self-locking knob resists drift from vibration. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac GAFR Adjustable Filter Regulator GAFR30010ALWTK |
|---|---|
| Series | GAFR300 filter & regulator |
| Port size | 3/8" (NPT thread) |
| Filtering grade | 5 µm |
| Pressure range | 0.15 - 0.4 MPa (20 - 58 psi) |
| Type | Lower pressure |
| Bowl material | PC |
| Drain type | Automatic drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 60 cc |
| Bracket | Included |
| Weight | 500 g |
Specifications follow the official AirTAC GAFR catalogue (pages 235-236). Air must not freeze in the unit. The fitted circular gauge reads in psi / bar, set by the NPT thread code. This unit filters and regulates only; it does not add lubrication.
| GAFR300 | GA300 series filter & regulator — sets the port range, drain-bowl capacity and weight. |
|---|---|
| (blank) | Bowl material: PC. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 10 | Port size 3/8". This body offers 08 = 1/4", 10 = 3/8", 15 = 1/2". |
| A | Drain: Automatic drain. |
| L | Lower pressure type — 0.15 - 0.4 MPa (20 - 58 psi). This body offers Standard (S) or Lower pressure (L). |
| (blank) | Mounting bracket included. |
| (blank) | Circular pressure gauge fitted. |
| W | Filtering grade 5 µm. |
| T | NPT thread; gauge scale psi / bar. |
| K | Reverse-flow (reflux) valve attached. |
The filter and the regulator are ONE body here — there is no separate GAF filter or GAR regulator part to assemble. Need lubrication downstream too? Add a lubricator by ordering the matching GAFC300-10 F.R.L. combination instead.
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAFR300 · 3/8" · curve to 3500 L/min |
|---|---|
| One size down | GAFR200 |
| One size up | GAFR400 (curve to 7000 L/min) |
| Add a lubricator | GAFC300-10 (F.R.L. combination) |
Feed a bank of precision pneumatic valves that require a stable, lower supply pressure, with the 5 um element protecting fine internal passages from particulate contamination.
Supply a laboratory or test rig with cleaner air at a controlled lower pressure, where the 5 um filtration helps protect sensitive measurement instruments.
Use on a machine station where the automatic drain handles condensate without manual intervention, and the lower pressure setting protects delicate tooling.
Choose this GAFR300 for 3/8in lines needing lower regulated pressure, up to 0.4 MPa. The 5 um element traps finer particles than the standard 40 um, suitable for precision valves, though it may need more frequent service. The automatic drain handles wet or unattended lines, while the included bracket simplifies mounting. The fitted circular gauge shows MPa/psi, and the reverse-flow valve is an ordering option. If oil is needed downstream, order the matching GAFC300-10 combination instead. Note that 1.0 MPa max supply leaves about 0.6 MPa above the 0.4 MPa top of the range.
Quick checklist
This is a filter and regulator only — it delivers filtered, pressure-set air with no added oil. If a downstream tool needs lubrication, add a separate lubricator or order the GAFC300-10 combination; do not expect an oil mist from this unit.
The GAFR30010ALWTK is a filter & regulator with a 3/8in port, pressure range 0.15-0.4 MPa (20-58 psi), max pressure 1.0 MPa (145 psi), proof pressure 1.5 MPa (215 psi), temperature range -5 to 70 C, 60 cc drain bowl, and 500 g weight. It has a 5 um element and an automatic drain.
The 'K' indicates a reverse-flow (reflux) valve is fitted to the unit. This is an ordering difference; the function is detailed in the catalogue. This model also has a 5 um element and an automatic drain.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.