
The AirTAC GAFR Adjustable Filter Regulator GAFR30010ASJNT is a genuine two-in-one filter & regulator — a diversion-type water/particulate filter and a balanced pressure regulator built into ONE body. It has 3/8" ports, a 40 µm filter element and regulates 0.15 - 0.9 MPa (20 - 130 psi). It has no lubricator, so it adds no oil to the airflow.
The GAFR30010ASJNT is a filter and regulator combined into a single body, saving rail space and reducing potential leak points compared to separate units. It handles a 3/8in port with a 40 um element and delivers a steady 0.15-0.9 MPa (20-130 psi) outlet.
This 500 g unit features an automatic drain that purges condensate without manual attention. The balanced regulator holds the set pressure as supply varies, while the pressed-in knob resists drift from vibration. No gauge is fitted, but the 1/8in connection allows one to be added later. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac GAFR Adjustable Filter Regulator GAFR30010ASJNT |
|---|---|
| Series | GAFR300 filter & regulator |
| Port size | 3/8" (NPT thread) |
| Filtering grade | 40 µm |
| Pressure range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Type | Standard |
| Bowl material | PC |
| Drain type | Automatic drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 60 cc |
| Bracket | Not included (J) |
| Weight | 500 g |
Specifications follow the official AirTAC GAFR catalogue (pages 235-236). Air must not freeze in the unit. No gauge is supplied with this model — the gauge connection on a GAFR300 is 1/8" if you add one. This unit filters and regulates only; it does not add lubrication.
| GAFR300 | GA300 series filter & regulator — sets the port range, drain-bowl capacity and weight. |
|---|---|
| (blank) | Bowl material: PC. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 10 | Port size 3/8". This body offers 08 = 1/4", 10 = 3/8", 15 = 1/2". |
| A | Drain: Automatic drain. |
| S | Standard type — 0.15 - 0.9 MPa (20 - 130 psi). This body offers Standard (S) or Lower pressure (L). |
| J | No bracket (J) — supplied without the mounting bracket. |
| N | No pressure gauge; 1/8" gauge connection. |
| (blank) | Filtering grade 40 µm. |
| T | NPT thread; gauge scale psi / bar. |
| (blank) | No reverse-flow valve. |
The filter and the regulator are ONE body here — there is no separate GAF filter or GAR regulator part to assemble. Need lubrication downstream too? Add a lubricator by ordering the matching GAFC300-10 F.R.L. combination instead.
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAFR300 · 3/8" · curve to 3500 L/min |
|---|---|
| One size down | GAFR200 |
| One size up | GAFR400 (curve to 7000 L/min) |
| Add a lubricator | GAFC300-10 (F.R.L. combination) |
Feed a single precision fixture or a small indexing table that needs clean, regulated air at a stable pressure. The 40 um element protects fine orifices in pilot valves and air bearings.
Supply a laboratory test bench or calibration rig where a steady 0.15-0.9 MPa output is critical. The automatic drain keeps the bowl from filling during long, unattended test cycles.
Provide filtered, regulated air to a machine guard interlock or a single-acting cylinder on a light assembly station. The compact 500 g body mounts easily near the point of use.
Choose the GAFR300 body for medium-flow lines needing a 3/8in port and a 60 cc drain bowl. This model has an automatic drain (A) for wet or unattended lines, and no bracket (J) for panel-mount installations. The PC bowl suits standard shop air; select a metal or nylon bowl if your environment demands it. The 40 um element is the standard choice, while the 5 um option (W) traps finer particles for sensitive equipment. The NPT thread provides an MPa/psi gauge scale. If oil is needed downstream, order the matching GAFC300-10 combination instead. 1.0 MPa max supply leaves about 0.1 MPa above the 0.9 MPa top of the range.
Quick checklist
This is a filter and regulator only — it delivers filtered, pressure-set air with no added oil. If a downstream tool needs lubrication, add a separate lubricator or order the GAFC300-10 combination; do not expect an oil mist from this unit.
The GAFR30010ASJNT is a filter & regulator with a 3/8in port. Working pressure is 0.15-0.9 MPa (20-130 psi), with a max pressure of 1.0 MPa (145 psi) and proof pressure of 1.5 MPa (215 psi). Operating temperature is -5 to 70 C. The drain bowl holds 60 cc and the unit weighs 500 g. It has a 40 um element and an automatic drain.
The 'J' code means the mounting bracket is omitted, for installations using an existing bracket or a panel mount. The 'N' code means no gauge is supplied; the 1/8in gauge connection is available if you add one later. This reduces cost when a local gauge is not required or when remote pressure sensing is used.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.