
The AirTAC GAFR Adjustable Filter Regulator GAFR30010ASJWT is a genuine two-in-one filter & regulator — a diversion-type water/particulate filter and a balanced pressure regulator built into ONE body. It has 3/8" ports, a 5 µm filter element and regulates 0.15 - 0.9 MPa (20 - 130 psi). It has no lubricator, so it adds no oil to the airflow.
The GAFR30010ASJWT is a filter and regulator combined into a single body, so it cleans incoming air and sets a steady outlet pressure without needing a separate filter plus regulator pair. This 3/8in version weighs 500 g and uses a 5 um element to trap fine particles, while its automatic drain clears condensate without manual attention.
Its working range is 0.15-0.9 MPa (20-130 psi), with a maximum supply of 1.0 MPa (145 psi) and proof pressure of 1.5 MPa (215 psi). The circular gauge with MPa/psi scale is fitted, and the unit operates from -5 to 70 C, so it must not be allowed to freeze. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac GAFR Adjustable Filter Regulator GAFR30010ASJWT |
|---|---|
| Series | GAFR300 filter & regulator |
| Port size | 3/8" (NPT thread) |
| Filtering grade | 5 µm |
| Pressure range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Type | Standard |
| Bowl material | PC |
| Drain type | Automatic drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 60 cc |
| Bracket | Not included (J) |
| Weight | 500 g |
Specifications follow the official AirTAC GAFR catalogue (pages 235-236). Air must not freeze in the unit. The fitted circular gauge reads in psi / bar, set by the NPT thread code. This unit filters and regulates only; it does not add lubrication.
| GAFR300 | GA300 series filter & regulator — sets the port range, drain-bowl capacity and weight. |
|---|---|
| (blank) | Bowl material: PC. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 10 | Port size 3/8". This body offers 08 = 1/4", 10 = 3/8", 15 = 1/2". |
| A | Drain: Automatic drain. |
| S | Standard type — 0.15 - 0.9 MPa (20 - 130 psi). This body offers Standard (S) or Lower pressure (L). |
| J | No bracket (J) — supplied without the mounting bracket. |
| (blank) | Circular pressure gauge fitted. |
| W | Filtering grade 5 µm. |
| T | NPT thread; gauge scale psi / bar. |
| (blank) | No reverse-flow valve. |
The filter and the regulator are ONE body here — there is no separate GAF filter or GAR regulator part to assemble. Need lubrication downstream too? Add a lubricator by ordering the matching GAFC300-10 F.R.L. combination instead.
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAFR300 · 3/8" · curve to 3500 L/min |
|---|---|
| One size down | GAFR200 |
| One size up | GAFR400 (curve to 7000 L/min) |
| Add a lubricator | GAFC300-10 (F.R.L. combination) |
Feed a bank of precision pneumatic valves that need clean, regulated air at a steady 0.6 MPa. The 5 um element protects fine internal passages from abrasive particles.
Mount this 3/8in unit on a machining center's air line to filter condensate and hold a stable pressure for clamping fixtures. The automatic drain keeps the bowl from filling during long shifts.
Use it on a laboratory test bench where a compact 500 g unit with a visible gauge is needed to set pressures for actuator tests. The 5 um element suits sensitive instrumentation.
Choose the GAFR300 body when you need a 3/8in port and a 60 cc condensate bowl, which holds about 2.4x the volume of the GAFR200's 25 cc bowl. The blank bowl code means a polycarbonate (PC) bowl, while the automatic drain (A) suits unattended or wet lines, and the 5 um element (W) captures finer particles than the standard 40 um grade. The J code omits the mounting bracket, so plan for a panel mount or existing bracket, and the NPT thread brings an MPa/psi gauge scale. If downstream lubrication is ever required, the matching GAFC300-10 combination adds a lubricator, since this unit does not oil the air. Note that 1.0 MPa max supply leaves about 0.1 MPa above the 0.9 MPa top of the range, so keep inlet pressure near the maximum to reach the highest setpoint.
Quick checklist
This is a filter and regulator only — it delivers filtered, pressure-set air with no added oil. If a downstream tool needs lubrication, add a separate lubricator or order the GAFC300-10 combination; do not expect an oil mist from this unit.
It is a filter and regulator in one body with a 3/8in port. Working pressure range is 0.15-0.9 MPa (20-130 psi), maximum pressure is 1.0 MPa (145 psi), and proof pressure is 1.5 MPa (215 psi). Temperature range is -5 to 70 C. The drain bowl holds 60 cc and the unit weighs 500 g. It has an automatic drain, a 5 um element, and a fitted gauge with MPa/psi scale.
The J code in GAFR30010ASJWT means the mounting bracket is not included. This is for installations where the unit will be panel-mounted or attached to an existing bracket structure. If you need the standard bracket, order without the J code, such as GAFR30010ASW.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.