
The AirTAC GAFR Adjustable Filter Regulator GAFR30010ASWT is a genuine two-in-one filter & regulator — a diversion-type water/particulate filter and a balanced pressure regulator built into ONE body. It has 3/8" ports, a 5 µm filter element and regulates 0.15 - 0.9 MPa (20 - 130 psi). It has no lubricator, so it adds no oil to the airflow.
The GAFR30010ASWT is a filter and regulator built as a single body, so it cleans the air and sets a steady outlet pressure without needing a separate filter plus regulator pair. This 3/8in unit works across 0.15-0.9 MPa (20-130 psi) and uses a 5 um element to trap fine particles for sensitive equipment.
The automatic drain clears condensate without manual attention, and the 60 cc bowl holds the water and solids spun out by the diversion structure. Weighing 500 g, this size class suits panels where a compact, combined unit saves rail space compared to mounting two separate components. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac GAFR Adjustable Filter Regulator GAFR30010ASWT |
|---|---|
| Series | GAFR300 filter & regulator |
| Port size | 3/8" (NPT thread) |
| Filtering grade | 5 µm |
| Pressure range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Type | Standard |
| Bowl material | PC |
| Drain type | Automatic drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 60 cc |
| Bracket | Included |
| Weight | 500 g |
Specifications follow the official AirTAC GAFR catalogue (pages 235-236). Air must not freeze in the unit. The fitted circular gauge reads in psi / bar, set by the NPT thread code. This unit filters and regulates only; it does not add lubrication.
| GAFR300 | GA300 series filter & regulator — sets the port range, drain-bowl capacity and weight. |
|---|---|
| (blank) | Bowl material: PC. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 10 | Port size 3/8". This body offers 08 = 1/4", 10 = 3/8", 15 = 1/2". |
| A | Drain: Automatic drain. |
| S | Standard type — 0.15 - 0.9 MPa (20 - 130 psi). This body offers Standard (S) or Lower pressure (L). |
| (blank) | Mounting bracket included. |
| (blank) | Circular pressure gauge fitted. |
| W | Filtering grade 5 µm. |
| T | NPT thread; gauge scale psi / bar. |
| (blank) | No reverse-flow valve. |
The filter and the regulator are ONE body here — there is no separate GAF filter or GAR regulator part to assemble. Need lubrication downstream too? Add a lubricator by ordering the matching GAFC300-10 F.R.L. combination instead.
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAFR300 · 3/8" · curve to 3500 L/min |
|---|---|
| One size down | GAFR200 |
| One size up | GAFR400 (curve to 7000 L/min) |
| Add a lubricator | GAFC300-10 (F.R.L. combination) |
Feed a bank of precision pneumatic valves on a small assembly station where the 5 um element protects fine internal passages from particle wear.
Mount on a compact machining fixture to supply clean, regulated air to a single actuator or clamping cylinder, with the automatic drain handling wet shop air.
Use on a lab test bench to provide a stable 0.15-0.9 MPa supply to measurement instruments, where the balanced regulator holds setpoint as line pressure varies.
Choose the GAFR300 body for 3/8in porting with a 3500 L/min flow envelope at 0.7 MPa inlet, which steps down from the GAFR400's 7000 L/min if you need more capacity. The PC bowl suits general dry indoor lines, while the 5 um element here filters finer than the standard 40 um grade for precision valves or instrument air. This model has the automatic drain, the mounting bracket included, and a fitted circular gauge with MPa/psi scale from the NPT thread. If the line needs oil downstream, order the matching GAFC300-10 combination instead, since this unit does not lubricate. A 1.0 MPa max supply leaves about 0.1 MPa above the 0.9 MPa top of the range, so plan inlet pressure near the maximum for full output.
Quick checklist
This is a filter and regulator only — it delivers filtered, pressure-set air with no added oil. If a downstream tool needs lubrication, add a separate lubricator or order the GAFC300-10 combination; do not expect an oil mist from this unit.
This filter & regulator has a 3/8in port, working pressure 0.15-0.9 MPa (20-130 psi), max pressure 1.0 MPa (145 psi), proof pressure 1.5 MPa (215 psi), temperature range -5 to 70 C, 60 cc drain bowl, and weighs 500 g. The 5 um element and automatic drain are fitted, with a NPT thread and MPa/psi gauge scale.
The 5 um element traps much finer particles than the standard 40 um grade, making it suitable for precision valves or instrument air where small contaminants cause issues. The trade-off is that the finer element will load up faster and need more frequent replacement, so factor that into maintenance planning.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.