
The AirTAC GAFR Adjustable Filter Regulator GAFR30010LJNT is a genuine two-in-one filter & regulator — a diversion-type water/particulate filter and a balanced pressure regulator built into ONE body. It has 3/8" ports, a 40 µm filter element and regulates 0.15 - 0.4 MPa (20 - 58 psi). It has no lubricator, so it adds no oil to the airflow.
The GAFR30010LJNT is a filter and regulator combined in a single body, removing water and solid particles from the air line before stabilizing outlet pressure. This lower-pressure version operates from 0.15 to 0.4 MPa (20-58 psi) and uses a 40 um element.
Its compact 500 g body with a 3/8in port suits tight machine spaces, while the 60 cc condensate bowl collects separated liquid. The semi-auto and manual drains are both fitted, and the unit ships without a gauge or mounting bracket. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac GAFR Adjustable Filter Regulator GAFR30010LJNT |
|---|---|
| Series | GAFR300 filter & regulator |
| Port size | 3/8" (NPT thread) |
| Filtering grade | 40 µm |
| Pressure range | 0.15 - 0.4 MPa (20 - 58 psi) |
| Type | Lower pressure |
| Bowl material | PC |
| Drain type | Semi-auto drain + manual drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 60 cc |
| Bracket | Not included (J) |
| Weight | 500 g |
Specifications follow the official AirTAC GAFR catalogue (pages 235-236). Air must not freeze in the unit. No gauge is supplied with this model — the gauge connection on a GAFR300 is 1/8" if you add one. This unit filters and regulates only; it does not add lubrication.
| GAFR300 | GA300 series filter & regulator — sets the port range, drain-bowl capacity and weight. |
|---|---|
| (blank) | Bowl material: PC. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 10 | Port size 3/8". This body offers 08 = 1/4", 10 = 3/8", 15 = 1/2". |
| (blank) | Drain: Semi-auto drain + manual drain. |
| L | Lower pressure type — 0.15 - 0.4 MPa (20 - 58 psi). This body offers Standard (S) or Lower pressure (L). |
| J | No bracket (J) — supplied without the mounting bracket. |
| N | No pressure gauge; 1/8" gauge connection. |
| (blank) | Filtering grade 40 µm. |
| T | NPT thread; gauge scale psi / bar. |
| (blank) | No reverse-flow valve. |
The filter and the regulator are ONE body here — there is no separate GAF filter or GAR regulator part to assemble. Need lubrication downstream too? Add a lubricator by ordering the matching GAFC300-10 F.R.L. combination instead.
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAFR300 · 3/8" · curve to 3500 L/min |
|---|---|
| One size down | GAFR200 |
| One size up | GAFR400 (curve to 7000 L/min) |
| Add a lubricator | GAFC300-10 (F.R.L. combination) |
Feed a delicate clamping or pressing fixture that must never see more than 0.4 MPa. The lower-pressure L type prevents accidental over-pressure while the filter keeps debris off precision surfaces.
Supply a lab bench with filtered air at a stable low pressure for experiments or test setups. The 40 um element removes particulates that could contaminate samples, and the compact body fits under a bench.
Regulate air for a spray gun or small booth at a consistent low pressure. The filter traps water droplets that would ruin a finish, and the semi-auto drain clears condensate without stopping production.
Choose the GAFR300 body for 3/8in porting with a 3500 L/min flow curve at 0.7 MPa inlet, a step up from the GAFR200's 2000 L/min envelope. The PC bowl suits standard shop air, while the L-type regulator caps at 0.4 MPa for low-pressure circuits. This model omits the bracket (J) for panel mounting and has no gauge (N), so plan to add one via the 1/8in connection if you need to read set pressure. The 40 um element handles general pneumatic duties, and the semi-auto plus manual drain gives both automatic dumping and a manual override. If the line needs oil downstream, order the matching GAFC300-10 combination instead. A 1.0 MPa max supply leaves about 0.6 MPa above the 0.4 MPa top of the range.
Quick checklist
This is a filter and regulator only — it delivers filtered, pressure-set air with no added oil. If a downstream tool needs lubrication, add a separate lubricator or order the GAFC300-10 combination; do not expect an oil mist from this unit.
Working pressure is 0.15-0.4 MPa (20-58 psi), max pressure is 1.0 MPa (145 psi), and proof pressure is 1.5 MPa (215 psi). Temperature range is -5 to 70 C. The drain bowl holds 60 cc and the unit weighs 500 g. It uses a 40 um element and has a 3/8in port.
The N code means no gauge is supplied, so you cannot read the set pressure without adding one to the 1/8in gauge connection. The J code omits the mounting bracket, which suits installations where the unit is panel-mounted or secured by existing hardware. Both options reduce cost when these features are not needed.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.