
The AirTAC GAFR Adjustable Filter Regulator GAFR30010LJNWTK is a genuine two-in-one filter & regulator — a diversion-type water/particulate filter and a balanced pressure regulator built into ONE body. It has 3/8" ports, a 5 µm filter element and regulates 0.15 - 0.4 MPa (20 - 58 psi). It has no lubricator, so it adds no oil to the airflow.
The GAFR30010LJNWTK is a filter and pressure regulator combined into a single body, so incoming air is cleaned and then set to a steady outlet pressure without needing separate parts. This 3/8in unit operates in the lower 0.15-0.4 MPa (20-58 psi) range and uses a 5 um element to trap fine particles.
A diversion structure spins the air to separate liquid water and solid debris into the 60 cc condensate bowl, while the balanced regulator holds the set pressure as supply varies. The pressed-in self-locking knob resists drift from vibration, and the 500 g mass means it needs a proper panel or frame mount rather than support from the tubing. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac GAFR Adjustable Filter Regulator GAFR30010LJNWTK |
|---|---|
| Series | GAFR300 filter & regulator |
| Port size | 3/8" (NPT thread) |
| Filtering grade | 5 µm |
| Pressure range | 0.15 - 0.4 MPa (20 - 58 psi) |
| Type | Lower pressure |
| Bowl material | PC |
| Drain type | Semi-auto drain + manual drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 60 cc |
| Bracket | Not included (J) |
| Weight | 500 g |
Specifications follow the official AirTAC GAFR catalogue (pages 235-236). Air must not freeze in the unit. No gauge is supplied with this model — the gauge connection on a GAFR300 is 1/8" if you add one. This unit filters and regulates only; it does not add lubrication.
| GAFR300 | GA300 series filter & regulator — sets the port range, drain-bowl capacity and weight. |
|---|---|
| (blank) | Bowl material: PC. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 10 | Port size 3/8". This body offers 08 = 1/4", 10 = 3/8", 15 = 1/2". |
| (blank) | Drain: Semi-auto drain + manual drain. |
| L | Lower pressure type — 0.15 - 0.4 MPa (20 - 58 psi). This body offers Standard (S) or Lower pressure (L). |
| J | No bracket (J) — supplied without the mounting bracket. |
| N | No pressure gauge; 1/8" gauge connection. |
| W | Filtering grade 5 µm. |
| T | NPT thread; gauge scale psi / bar. |
| K | Reverse-flow (reflux) valve attached. |
The filter and the regulator are ONE body here — there is no separate GAF filter or GAR regulator part to assemble. Need lubrication downstream too? Add a lubricator by ordering the matching GAFC300-10 F.R.L. combination instead.
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAFR300 · 3/8" · curve to 3500 L/min |
|---|---|
| One size down | GAFR200 |
| One size up | GAFR400 (curve to 7000 L/min) |
| Add a lubricator | GAFC300-10 (F.R.L. combination) |
Feed a single pneumatic actuator or small clamping fixture on a bench where the lower pressure range protects delicate parts from over-force.
Supply instrument air to a test jig or measurement device that needs fine particle filtration and a stable, low regulated pressure.
Mount on a mobile service cart to provide filtered, regulated air to hand tools or blow guns at a controlled 0.15-0.4 MPa setting.
Choose the GAFR300 body for 3/8in ports and a 3500 L/min flow curve at 0.7 MPa inlet, stepping down from the GAFR400's 7000 L/min envelope if your line is smaller. The PC bowl suits general shop air, while the 5 um element captures finer particles than the standard 40 um for sensitive valves. This model ships without the mounting bracket (J) and without a gauge, so plan to add one via the 1/8in gauge connection if you need to read pressure. The semi-auto+manual drain requires periodic attention, and the reverse-flow (reflux) valve is fitted as an ordering difference. For lines needing oil downstream, order the matching GAFC300-10 combination instead. With a 1.0 MPa max supply, you have about 0.6 MPa of headroom above the 0.4 MPa top of this unit's regulated range.
Quick checklist
This is a filter and regulator only — it delivers filtered, pressure-set air with no added oil. If a downstream tool needs lubrication, add a separate lubricator or order the GAFC300-10 combination; do not expect an oil mist from this unit.
This filter & regulator has a 3/8in port, a 0.15-0.4 MPa (20-58 psi) regulated range, a 1.0 MPa (145 psi) max pressure, and a 1.5 MPa (215 psi) proof pressure. It operates from -5 to 70 C, has a 60 cc condensate bowl, and weighs 500 g.
The J code omits the mounting bracket for panel-mount or existing installations, and the N code means no gauge is supplied. You can add a gauge later through the 1/8in connection, but the set pressure cannot be read until you do.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.