
The AirTAC GAFR Adjustable Filter Regulator GAFR30010LJT is a genuine two-in-one filter & regulator — a diversion-type water/particulate filter and a balanced pressure regulator built into ONE body. It has 3/8" ports, a 40 µm filter element and regulates 0.15 - 0.4 MPa (20 - 58 psi). It has no lubricator, so it adds no oil to the airflow.
The GAFR30010LJT is a filter and regulator combined into a single body, so incoming air is cleaned and then set to a steady outlet pressure without needing separate units. It has no lubricator and only one bowl - the 60 cc condensate bowl - making it a compact choice for a 3/8in line.
This lower-pressure version regulates from 0.15 to 0.4 MPa (20-58 psi) with a 40 um element, and the circular gauge with MPa/psi scale is fitted. The semi-auto and manual drains are both included, and the unit weighs 500 g. The pressed-in self-locking knob resists drift from vibration, keeping the set pressure stable. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac GAFR Adjustable Filter Regulator GAFR30010LJT |
|---|---|
| Series | GAFR300 filter & regulator |
| Port size | 3/8" (NPT thread) |
| Filtering grade | 40 µm |
| Pressure range | 0.15 - 0.4 MPa (20 - 58 psi) |
| Type | Lower pressure |
| Bowl material | PC |
| Drain type | Semi-auto drain + manual drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 60 cc |
| Bracket | Not included (J) |
| Weight | 500 g |
Specifications follow the official AirTAC GAFR catalogue (pages 235-236). Air must not freeze in the unit. The fitted circular gauge reads in psi / bar, set by the NPT thread code. This unit filters and regulates only; it does not add lubrication.
| GAFR300 | GA300 series filter & regulator — sets the port range, drain-bowl capacity and weight. |
|---|---|
| (blank) | Bowl material: PC. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 10 | Port size 3/8". This body offers 08 = 1/4", 10 = 3/8", 15 = 1/2". |
| (blank) | Drain: Semi-auto drain + manual drain. |
| L | Lower pressure type — 0.15 - 0.4 MPa (20 - 58 psi). This body offers Standard (S) or Lower pressure (L). |
| J | No bracket (J) — supplied without the mounting bracket. |
| (blank) | Circular pressure gauge fitted. |
| (blank) | Filtering grade 40 µm. |
| T | NPT thread; gauge scale psi / bar. |
| (blank) | No reverse-flow valve. |
The filter and the regulator are ONE body here — there is no separate GAF filter or GAR regulator part to assemble. Need lubrication downstream too? Add a lubricator by ordering the matching GAFC300-10 F.R.L. combination instead.
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAFR300 · 3/8" · curve to 3500 L/min |
|---|---|
| One size down | GAFR200 |
| One size up | GAFR400 (curve to 7000 L/min) |
| Add a lubricator | GAFC300-10 (F.R.L. combination) |
Set a stable low pressure for a sensitive pneumatic valve or a small indexing table where the 0.15-0.4 MPa band is sufficient and vibration could otherwise shift the setpoint.
Mount this 500 g unit directly on a panel in a space-constrained assembly line where a separate filter and regulator would not fit, using the existing bracket holes.
Feed a bench-top testing fixture that requires a controlled 0.2-0.35 MPa supply, with the semi-auto drain handling condensate from a moderately wet air line.
Choose the GAFR300 body for 3/8in ports with a 60 cc drain bowl and 500 g weight, sitting between the smaller GAFR200 and the larger GAFR400. The L type tops out at 0.4 MPa, so if your machine may ever need more than that, select the standard S version instead. The J code means no mounting bracket is supplied, so plan for panel mounting or use an existing bracket. The PC bowl and 40 um element are the standard choices, while the semi-auto plus manual drain gives you both automatic purging and manual override. The NPT thread comes with an MPa/psi gauge scale, and no reverse-flow valve is fitted. If oil is needed downstream, order the matching GAFC300-10 combination. 1.0 MPa max supply leaves about 0.6 MPa above the 0.4 MPa top of the range.
Quick checklist
This is a filter and regulator only — it delivers filtered, pressure-set air with no added oil. If a downstream tool needs lubrication, add a separate lubricator or order the GAFC300-10 combination; do not expect an oil mist from this unit.
The GAFR30010LJT is a filter & regulator with a 3/8in port, pressure range 0.15-0.4 MPa (20-58 psi), max pressure 1.0 MPa (145 psi), proof pressure 1.5 MPa (215 psi), temperature range -5 to 70 C, 60 cc drain bowl, and 500 g weight. It has a 40 um element, PC bowl, semi-auto plus manual drain, and no mounting bracket.
The L in the code means lower-pressure type, regulating only up to 0.4 MPa instead of the standard 0.9 MPa. The J code means the mounting bracket is not included, so you need to provide your own panel mount or existing bracket. The gauge is fitted and shows MPa/psi.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.