
The AirTAC GAFR Adjustable Filter Regulator GAFR30010LJTK is a genuine two-in-one filter & regulator — a diversion-type water/particulate filter and a balanced pressure regulator built into ONE body. It has 3/8" ports, a 40 µm filter element and regulates 0.15 - 0.4 MPa (20 - 58 psi). It has no lubricator, so it adds no oil to the airflow.
The GAFR30010LJTK is a filter and pressure regulator combined into a single body, so incoming air is cleaned and then set to a steady outlet pressure without needing separate components. This 3/8in unit operates in the lower 0.15-0.4 MPa (20-58 psi) band and uses a 40 um element to trap solids and liquid water.
A balanced regulator mechanism keeps the outlet steady as supply pressure varies, while the pressed-in self-locking knob resists drift from vibration. The 60 cc condensate bowl collects what the diversion structure spins out, and the included circular gauge with MPa/psi scale lets you read the set pressure directly. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac GAFR Adjustable Filter Regulator GAFR30010LJTK |
|---|---|
| Series | GAFR300 filter & regulator |
| Port size | 3/8" (NPT thread) |
| Filtering grade | 40 µm |
| Pressure range | 0.15 - 0.4 MPa (20 - 58 psi) |
| Type | Lower pressure |
| Bowl material | PC |
| Drain type | Semi-auto drain + manual drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 60 cc |
| Bracket | Not included (J) |
| Weight | 500 g |
Specifications follow the official AirTAC GAFR catalogue (pages 235-236). Air must not freeze in the unit. The fitted circular gauge reads in psi / bar, set by the NPT thread code. This unit filters and regulates only; it does not add lubrication.
| GAFR300 | GA300 series filter & regulator — sets the port range, drain-bowl capacity and weight. |
|---|---|
| (blank) | Bowl material: PC. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 10 | Port size 3/8". This body offers 08 = 1/4", 10 = 3/8", 15 = 1/2". |
| (blank) | Drain: Semi-auto drain + manual drain. |
| L | Lower pressure type — 0.15 - 0.4 MPa (20 - 58 psi). This body offers Standard (S) or Lower pressure (L). |
| J | No bracket (J) — supplied without the mounting bracket. |
| (blank) | Circular pressure gauge fitted. |
| (blank) | Filtering grade 40 µm. |
| T | NPT thread; gauge scale psi / bar. |
| K | Reverse-flow (reflux) valve attached. |
The filter and the regulator are ONE body here — there is no separate GAF filter or GAR regulator part to assemble. Need lubrication downstream too? Add a lubricator by ordering the matching GAFC300-10 F.R.L. combination instead.
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAFR300 · 3/8" · curve to 3500 L/min |
|---|---|
| One size down | GAFR200 |
| One size up | GAFR400 (curve to 7000 L/min) |
| Add a lubricator | GAFC300-10 (F.R.L. combination) |
Feed a single precision pneumatic valve or small actuator that requires a stable, lower regulated pressure without the risk of over-pressurizing sensitive components.
Use on a lab or workbench test setup where a compact 3/8in unit with a 40 um filter protects instruments and the lower pressure range suits delicate calibration work.
Mount on a light assembly fixture where the 500 g body and included gauge allow operators to verify set pressure, while the semi-auto drain suits regular maintenance schedules.
Choose the GAFR300 body for 3/8in ports with a 500 g mass and a flow curve plotted to 3500 L/min at 0.7 MPa inlet, a step up from the GAFR200's 2000 L/min envelope. This model has a PC bowl, a semi-auto drain plus manual drain, a 40 um element, and no mounting bracket (J), so plan for panel mounting or an existing bracket. The NPT thread means the gauge reads MPa/psi, and the K code adds a reverse-flow valve as an ordering difference. If the line needs oil downstream, order the matching GAFC300-10 combination instead. 1.0 MPa max supply leaves about 0.6 MPa above the 0.4 MPa top of the range.
Quick checklist
This is a filter and regulator only — it delivers filtered, pressure-set air with no added oil. If a downstream tool needs lubrication, add a separate lubricator or order the GAFC300-10 combination; do not expect an oil mist from this unit.
The GAFR30010LJTK is a filter & regulator with a 3/8in port, 0.15-0.4 MPa (20-58 psi) working range, 1.0 MPa (145 psi) max pressure, 1.5 MPa (215 psi) proof pressure, and -5 to 70 C temperature range. It has a 60 cc drain bowl, weighs 500 g, uses a 40 um element, and includes a circular gauge with MPa/psi scale.
The K indicates a reverse-flow (reflux) valve is fitted to the GAFR30010LJTK. It is an ordering difference from models without the K code, and its function is detailed in the catalogue page not included in our data. The unit still filters and regulates in one body without any lubricator.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.