
The AirTAC GAFR Adjustable Filter Regulator GAFR30010LJWT is a genuine two-in-one filter & regulator — a diversion-type water/particulate filter and a balanced pressure regulator built into ONE body. It has 3/8" ports, a 5 µm filter element and regulates 0.15 - 0.4 MPa (20 - 58 psi). It has no lubricator, so it adds no oil to the airflow.
The GAFR30010LJWT is a filter and regulator combined into a single body, saving rail space and reducing potential leak points compared to separate units. It handles a 3/8in port and delivers a lower pressure range of 0.15-0.4 MPa (20-58 psi), with a 5 um element for finer filtration.
This model includes a circular gauge with MPa/psi scale, and comes without a mounting bracket. The 60 cc condensate bowl collects separated water and solids, and the semi-auto plus manual drain gives you control over purging. Weighing 500 g, it is a compact unit for tight installations. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac GAFR Adjustable Filter Regulator GAFR30010LJWT |
|---|---|
| Series | GAFR300 filter & regulator |
| Port size | 3/8" (NPT thread) |
| Filtering grade | 5 µm |
| Pressure range | 0.15 - 0.4 MPa (20 - 58 psi) |
| Type | Lower pressure |
| Bowl material | PC |
| Drain type | Semi-auto drain + manual drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 60 cc |
| Bracket | Not included (J) |
| Weight | 500 g |
Specifications follow the official AirTAC GAFR catalogue (pages 235-236). Air must not freeze in the unit. The fitted circular gauge reads in psi / bar, set by the NPT thread code. This unit filters and regulates only; it does not add lubrication.
| GAFR300 | GA300 series filter & regulator — sets the port range, drain-bowl capacity and weight. |
|---|---|
| (blank) | Bowl material: PC. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 10 | Port size 3/8". This body offers 08 = 1/4", 10 = 3/8", 15 = 1/2". |
| (blank) | Drain: Semi-auto drain + manual drain. |
| L | Lower pressure type — 0.15 - 0.4 MPa (20 - 58 psi). This body offers Standard (S) or Lower pressure (L). |
| J | No bracket (J) — supplied without the mounting bracket. |
| (blank) | Circular pressure gauge fitted. |
| W | Filtering grade 5 µm. |
| T | NPT thread; gauge scale psi / bar. |
| (blank) | No reverse-flow valve. |
The filter and the regulator are ONE body here — there is no separate GAF filter or GAR regulator part to assemble. Need lubrication downstream too? Add a lubricator by ordering the matching GAFC300-10 F.R.L. combination instead.
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAFR300 · 3/8" · curve to 3500 L/min |
|---|---|
| One size down | GAFR200 |
| One size up | GAFR400 (curve to 7000 L/min) |
| Add a lubricator | GAFC300-10 (F.R.L. combination) |
Feed a precise clamping fixture on a small assembly station. The 5 um element protects sensitive valves, while the lower pressure range suits delicate operations that must not see full shop pressure.
Supply a lab bench with clean, regulated air for instruments or small pneumatic actuators. The fine 5 um filtration and stable lower pressure output are well suited for controlled experiments.
Run a single pneumatic cylinder or a small air tool with a dedicated, clean air supply. The compact 500 g body and 3/8in port fit neatly into a localized control panel.
Choose the GAFR300 body for 3/8in porting, a step up from the GAFR200's 1/4in maximum. The L-type regulator is capped at 0.4 MPa, so if your line might ever need more pressure, select the standard S type instead. This unit ships without a bracket (J code), so plan for panel mounting or use an existing bracket. The 5 um element (W) traps finer particles than the standard 40 um, but expect more frequent element service. The NPT thread means the gauge reads in MPa/psi. For lines needing oil downstream, the matching GAFC300-10 combination adds a lubricator. With a 1.0 MPa max supply, you have about 0.6 MPa of headroom above the 0.4 MPa top of the regulated range.
Quick checklist
This is a filter and regulator only — it delivers filtered, pressure-set air with no added oil. If a downstream tool needs lubrication, add a separate lubricator or order the GAFC300-10 combination; do not expect an oil mist from this unit.
This filter & regulator has a 3/8in port, a lower pressure range of 0.15-0.4 MPa (20-58 psi), and a maximum supply pressure of 1.0 MPa (145 psi). Its proof pressure is 1.5 MPa (215 psi), and the operating temperature range is -5 to 70 C. The condensate bowl holds 60 cc, and the unit weighs 500 g. It includes a 5 um filter element and a semi-auto plus manual drain.
The 'L' indicates a lower-pressure regulator, with a maximum set pressure of 0.4 MPa (58 psi) instead of the standard 0.9 MPa. The 'J' code means the mounting bracket is not included, so you must provide your own panel mount or use an existing bracket. If you need the standard bracket, order a model without the 'J'.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.