
The AirTAC GAFR Adjustable Filter Regulator GAFR30010LNT is a genuine two-in-one filter & regulator — a diversion-type water/particulate filter and a balanced pressure regulator built into ONE body. It has 3/8" ports, a 40 µm filter element and regulates 0.15 - 0.4 MPa (20 - 58 psi). It has no lubricator, so it adds no oil to the airflow.
The GAFR30010LNT is a filter & regulator from AirTAC, combining air filtration and pressure regulation in a single body. It handles a 3/8in port and delivers a lower pressure range of 0.15-0.4 MPa (20-58 psi), with a 40 um filtering grade. This unit has no lubricator and only one bowl for condensate collection.
Its diversion structure spins incoming air to separate liquid water and solid particles into the 60 cc drain bowl. The balanced, self-locking regulator mechanism helps maintain the set outlet pressure despite supply variations, and the pressed-in knob resists drift from vibration. Weighing 500 g, this GAFR300 body is a compact single-unit replacement for a separate filter plus regulator setup. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac GAFR Adjustable Filter Regulator GAFR30010LNT |
|---|---|
| Series | GAFR300 filter & regulator |
| Port size | 3/8" (NPT thread) |
| Filtering grade | 40 µm |
| Pressure range | 0.15 - 0.4 MPa (20 - 58 psi) |
| Type | Lower pressure |
| Bowl material | PC |
| Drain type | Semi-auto drain + manual drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 60 cc |
| Bracket | Included |
| Weight | 500 g |
Specifications follow the official AirTAC GAFR catalogue (pages 235-236). Air must not freeze in the unit. No gauge is supplied with this model — the gauge connection on a GAFR300 is 1/8" if you add one. This unit filters and regulates only; it does not add lubrication.
| GAFR300 | GA300 series filter & regulator — sets the port range, drain-bowl capacity and weight. |
|---|---|
| (blank) | Bowl material: PC. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 10 | Port size 3/8". This body offers 08 = 1/4", 10 = 3/8", 15 = 1/2". |
| (blank) | Drain: Semi-auto drain + manual drain. |
| L | Lower pressure type — 0.15 - 0.4 MPa (20 - 58 psi). This body offers Standard (S) or Lower pressure (L). |
| (blank) | Mounting bracket included. |
| N | No pressure gauge; 1/8" gauge connection. |
| (blank) | Filtering grade 40 µm. |
| T | NPT thread; gauge scale psi / bar. |
| (blank) | No reverse-flow valve. |
The filter and the regulator are ONE body here — there is no separate GAF filter or GAR regulator part to assemble. Need lubrication downstream too? Add a lubricator by ordering the matching GAFC300-10 F.R.L. combination instead.
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAFR300 · 3/8" · curve to 3500 L/min |
|---|---|
| One size down | GAFR200 |
| One size up | GAFR400 (curve to 7000 L/min) |
| Add a lubricator | GAFC300-10 (F.R.L. combination) |
Feed a single precision fixture or small clamping cylinder that requires a stable, lower pressure setting. The 40 um element protects sensitive valve pilots, while the regulator holds the set point against minor supply fluctuations.
Use on a bench test rig where a controlled 0.15-0.4 MPa air supply is needed for calibrating gauges or checking small actuators. Its compact 500 g body and included bracket simplify mounting on a test panel.
Install at an assembly workstation to power a small screwdriver or air jet with clean, regulated air. The semi-auto drain lets an operator quickly purge collected condensate during shift changes.
Choose the GAFR30010LNT when you need filtered air at a lower regulated pressure, up to 0.4 MPa. The 3/8in port suits small to medium automation lines; for higher flow, step up to the GAFR400 body, whose flow curve is plotted to 7000 L/min at 0.7 MPa inlet. This model includes the mounting bracket and a semi-auto plus manual drain, with a PC bowl and no gauge fitted; the 1/8in gauge connection is available if you add one later. This order code has NPT ports (the T in the code); the PT and G versions are separate order codes. If your line needs oil downstream, order the matching GAFC300-10 combination instead. Note that 1.0 MPa max supply leaves about 0.6 MPa above the 0.4 MPa top of the range.
Quick checklist
This is a filter and regulator only — it delivers filtered, pressure-set air with no added oil. If a downstream tool needs lubrication, add a separate lubricator or order the GAFC300-10 combination; do not expect an oil mist from this unit.
The GAFR30010LNT is a filter & regulator with a 3/8in port, working pressure range of 0.15-0.4 MPa (20-58 psi), max pressure of 1.0 MPa (145 psi), and proof pressure of 1.5 MPa (215 psi). Its temperature range is -5 to 70 C, it has a 60 cc drain bowl, and weighs 500 g. The unit has a 40 um element and no gauge.
The 'L' in the code specifies a lower pressure type, capping the regulated output at 0.4 MPa (58 psi) for applications needing only modest pressure. The 'N' after the port code means no gauge is supplied; the 1/8in gauge connection is present if you wish to add one. This model also has a PC bowl and a semi-auto plus manual drain.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.