
The AirTAC GAFR Adjustable Filter Regulator GAFR30010LNWT is a genuine two-in-one filter & regulator — a diversion-type water/particulate filter and a balanced pressure regulator built into ONE body. It has 3/8" ports, a 5 µm filter element and regulates 0.15 - 0.4 MPa (20 - 58 psi). It has no lubricator, so it adds no oil to the airflow.
The GAFR30010LNWT is a filter and regulator combined into a single body, eliminating the need for separate GAF and GAR units. It spins incoming air to separate liquid water and trap solid particles, then a balanced regulator holds the outlet steady as supply pressure varies. This model has a 3/8in port, a lower-pressure range of 0.15-0.4 MPa (20-58 psi), and a 5 um element for finer filtration.
The pressed-in self-locking knob resists set-pressure drift from vibration, keeping the outlet stable. With a 60 cc condensate bowl and a 500 g mass, this unit suits compact machine builds where space is limited. The mounting bracket is included, and the gauge connection is 1/8in if a gauge is added later. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac GAFR Adjustable Filter Regulator GAFR30010LNWT |
|---|---|
| Series | GAFR300 filter & regulator |
| Port size | 3/8" (NPT thread) |
| Filtering grade | 5 µm |
| Pressure range | 0.15 - 0.4 MPa (20 - 58 psi) |
| Type | Lower pressure |
| Bowl material | PC |
| Drain type | Semi-auto drain + manual drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 60 cc |
| Bracket | Included |
| Weight | 500 g |
Specifications follow the official AirTAC GAFR catalogue (pages 235-236). Air must not freeze in the unit. No gauge is supplied with this model — the gauge connection on a GAFR300 is 1/8" if you add one. This unit filters and regulates only; it does not add lubrication.
| GAFR300 | GA300 series filter & regulator — sets the port range, drain-bowl capacity and weight. |
|---|---|
| (blank) | Bowl material: PC. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 10 | Port size 3/8". This body offers 08 = 1/4", 10 = 3/8", 15 = 1/2". |
| (blank) | Drain: Semi-auto drain + manual drain. |
| L | Lower pressure type — 0.15 - 0.4 MPa (20 - 58 psi). This body offers Standard (S) or Lower pressure (L). |
| (blank) | Mounting bracket included. |
| N | No pressure gauge; 1/8" gauge connection. |
| W | Filtering grade 5 µm. |
| T | NPT thread; gauge scale psi / bar. |
| (blank) | No reverse-flow valve. |
The filter and the regulator are ONE body here — there is no separate GAF filter or GAR regulator part to assemble. Need lubrication downstream too? Add a lubricator by ordering the matching GAFC300-10 F.R.L. combination instead.
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAFR300 · 3/8" · curve to 3500 L/min |
|---|---|
| One size down | GAFR200 |
| One size up | GAFR400 (curve to 7000 L/min) |
| Add a lubricator | GAFC300-10 (F.R.L. combination) |
Feed a bank of precision pneumatic valves that require clean, fine-filtered air at a stable lower pressure. The 5 um element protects sensitive internal orifices from fine particle wear.
Mount this 500 g unit on a small machine frame or panel where space is tight. The integrated filter and regulator saves rail width compared to two separate components, and the included bracket simplifies installation.
Supply a laboratory or test fixture with air filtered to 5 um and regulated to a gentle 0.15-0.4 MPa band. The lower pressure range protects delicate instruments from over-pressure.
Choose the GAFR30010LNWT for a 3/8in line needing lower regulated pressure, topping out at 0.4 MPa. The 5 um element traps finer particles than the standard 40 um, making it suitable for precision valves or instrument air, though it will need more frequent element service. The PC bowl is the standard build choice; the semi-auto plus manual drain gives you both automatic condensate release and a manual override. The bracket is included for rail mounting, and no gauge is fitted, so the set pressure cannot be read without adding one. If the line needs oil downstream, order the matching GAFC300-10 combination instead. The 1.0 MPa max supply leaves about 0.6 MPa above the 0.4 MPa top of the range, so plan the inlet pressure accordingly.
Quick checklist
This is a filter and regulator only — it delivers filtered, pressure-set air with no added oil. If a downstream tool needs lubrication, add a separate lubricator or order the GAFC300-10 combination; do not expect an oil mist from this unit.
The GAFR30010LNWT is a filter & regulator with a 3/8in port, a lower-pressure range of 0.15-0.4 MPa (20-58 psi), a maximum pressure of 1.0 MPa (145 psi), and a proof pressure of 1.5 MPa (215 psi). It operates from -5 to 70 C and must not freeze. The drain bowl holds 60 cc, and the unit weighs 500 g. It has a 5 um element and a semi-auto plus manual drain.
The L type regulates from 0.15 to 0.4 MPa, while the standard S type goes up to 0.9 MPa. If your machine might ever need more than 0.4 MPa, the L type is the wrong part. The 1.0 MPa max supply leaves about 0.6 MPa above the 0.4 MPa top of the range, so plan the inlet pressure accordingly.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.