verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC GAFR300 · Filter & Regulator (Filter + Pressure Regulator, One Body)

Airtac GAFR Adjustable Filter Regulator GAFR30010LWT

The AirTAC GAFR Adjustable Filter Regulator GAFR30010LWT is a genuine two-in-one filter & regulator — a diversion-type water/particulate filter and a balanced pressure regulator built into ONE body. It has 3/8" ports, a 5 µm filter element and regulates 0.15 - 0.4 MPa (20 - 58 psi). It has no lubricator, so it adds no oil to the airflow.

  • TypeFilter & regulator
  • Port size3/8"
  • Pressure range0.15 - 0.4 MPa (20 - 58 psi)
  • Filtering grade5 µm
  • Bowl materialPC
  • Drainsemi-auto + manual
  • Pressure gaugeCircular, psi / bar
  • Weight500 g
$40.58 $48.08Save 15% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every GAFR300-10 bowl, gauge and thread option on one page All GAFR300-10 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac GAFR Adjustable Filter Regulator GAFR30010LWT

The GAFR30010LWT is a filter and regulator combined into a single body, so incoming air is cleaned and then set to a steady outlet pressure without needing separate parts. This model uses a 3/8in port, works in the lower 0.15-0.4 MPa (20-58 psi) range, and comes with a 5 um element for finer filtration.

Its 60 cc condensate bowl collects the water and solids spun out by the diversion structure, while the balanced regulator holds the set pressure as supply varies. The pressed-in self-locking knob resists drift from vibration, and the included circular gauge shows the outlet pressure on an MPa/psi scale. This version has NPT ports (the T in the order code) for North American pipe fittings.

Airtac GAFR Adjustable Filter Regulator GAFR30010LWT Technical Specifications

ModelAirtac GAFR Adjustable Filter Regulator GAFR30010LWT
SeriesGAFR300 filter & regulator
Port size3/8" (NPT thread)
Filtering grade5 µm
Pressure range0.15 - 0.4 MPa (20 - 58 psi)
TypeLower pressure
Bowl materialPC
Drain typeSemi-auto drain + manual drain
FluidAir
Max. pressure1.0 MPa (145 psi)
Proof pressure1.5 MPa (215 psi)
Temperature range-5 to +70 °C (unfreeze)
Capacity of drain bowl60 cc
BracketIncluded
Weight500 g

Specifications follow the official AirTAC GAFR catalogue (pages 235-236). Air must not freeze in the unit. The fitted circular gauge reads in psi / bar, set by the NPT thread code. This unit filters and regulates only; it does not add lubrication.

Model Code: Airtac GAFR Adjustable Filter Regulator GAFR30010LWT

GAFR300GA300 series filter & regulator — sets the port range, drain-bowl capacity and weight.
(blank)Bowl material: PC. Available on this body: PC (blank), Metal (C), Nylon (N).
10Port size 3/8". This body offers 08 = 1/4", 10 = 3/8", 15 = 1/2".
(blank)Drain: Semi-auto drain + manual drain.
LLower pressure type — 0.15 - 0.4 MPa (20 - 58 psi). This body offers Standard (S) or Lower pressure (L).
(blank)Mounting bracket included.
(blank)Circular pressure gauge fitted.
WFiltering grade 5 µm.
TNPT thread; gauge scale psi / bar.
(blank)No reverse-flow valve.

The filter and the regulator are ONE body here — there is no separate GAF filter or GAR regulator part to assemble. Need lubrication downstream too? Add a lubricator by ordering the matching GAFC300-10 F.R.L. combination instead.

Size Class & Flow Envelope

  • GAFR2001/8"-1/4" · 2000 L/min
  • GAFR3001/4"-1/2" · 3500 L/min
  • GAFR4003/8"-1/2" · 7000 L/min
  • GAFR5003/4" · 8000 L/min
  • GAFR6003/4"-1" · 12000 L/min

Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.

This modelGAFR300 · 3/8" · curve to 3500 L/min
One size downGAFR200
One size upGAFR400 (curve to 7000 L/min)
Add a lubricatorGAFC300-10 (F.R.L. combination)

Where the Airtac GAFR Adjustable Filter Regulator GAFR30010LWT Is Used

precision_manufacturing

Precision valve control

Feed a 5 um filtered, lower-pressure air supply to precision pneumatic valves on a small assembly station, where consistent 0.15-0.4 MPa output protects sensitive actuators.

science

Laboratory air bench

Supply a lab bench with clean, regulated air for testing fixtures or air bearings, using the finer 5 um element to trap particles that could affect measurement results.

handyman

Single jig or fixture

Power a single clamping jig or a small indexing fixture on a manual workbench, where the 3/8in port and 60 cc bowl match the modest air consumption of one station.

Is the Airtac GAFR Adjustable Filter Regulator GAFR30010LWT the Right Air-Prep Unit?

Choose the GAFR300 for 1/4in to 1/2in lines where a 500 g unit with a 60 cc drain bowl fits the duty; step up to the GAFR400 for 3/8in to 1/2in needs with a 100 cc bowl and a flow envelope plotted to 7000 L/min at 0.7 MPa inlet. The L type tops out at 0.4 MPa, so if the machine may ever need more pressure, select the standard S version instead. This unit ships with the mounting bracket, a 5 um element, and both semi-auto and manual drains; the NPT thread matches the MPa/psi gauge scale. For lines that need oil downstream, order the matching GAFC300-10 combination rather than expecting this filter-regulator to lubricate. With a 1.0 MPa max supply, you have about 0.6 MPa of headroom above the 0.4 MPa top of this unit's regulated range.

Quick checklist

  • ✓ Body size for your peak flow (3/8" here)
  • ✓ Standard 0.9 MPa or lower-pressure 0.4 MPa
  • ✓ Bowl material: PC (blank), Metal (C), Nylon (N)
  • ✓ Drain: semi-auto + manual, or automatic
  • ✓ Element 40 µm or 5 µm
  • ✓ Bracket kept or removed (J); add a lubricator = GAFC
Ask an Engineer

Installation & Maintenance Notes

  • check Install with the airflow arrow: IN to OUT, gauge/knob accessible.
  • check Keep inlet pressure at or below 1.0 MPa (145 psi).
  • check Set pressure with the pressed-in self-locking knob; pull to adjust, press to lock.
  • check Drain condensate before the 60 cc bowl fills.
  • check Keep the unit above freezing (-5 to +70 °C, unfreeze).
  • check Support the 500 g unit on its bracket, not on the tubing.

This is a filter and regulator only — it delivers filtered, pressure-set air with no added oil. If a downstream tool needs lubrication, add a separate lubricator or order the GAFC300-10 combination; do not expect an oil mist from this unit.

Airtac GAFR Adjustable Filter Regulator GAFR30010LWT FAQ

The GAFR30010LWT is a filter & regulator with a 3/8in port, a lower pressure range of 0.15-0.4 MPa (20-58 psi), and a maximum pressure of 1.0 MPa (145 psi). Proof pressure is 1.5 MPa (215 psi), and the temperature range is -5 to 70 C. It has a 60 cc drain bowl, weighs 500 g, and uses a 5 um element.

The L indicates the lower-pressure type, which regulates from 0.15 to 0.4 MPa (20-58 psi) instead of the standard 0.15-0.9 MPa. This suits applications needing a limited, precise pressure band; if you might need more than 0.4 MPa, select the standard S type instead.

T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Request a Quote for Airtac GAFR Adjustable Filter Regulator GAFR30010LWT

Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for GAFR30010LWT and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.