
The AirTAC GAFR Adjustable Filter Regulator GAFR30010SJNT is a genuine two-in-one filter & regulator — a diversion-type water/particulate filter and a balanced pressure regulator built into ONE body. It has 3/8" ports, a 40 µm filter element and regulates 0.15 - 0.9 MPa (20 - 130 psi). It has no lubricator, so it adds no oil to the airflow.
The GAFR30010SJNT is a genuine AirTAC filter & regulator with both functions housed in a single body, so it replaces a separate filter and regulator with one compact unit that has fewer potential leak points. This model uses a 3/8in port, a 40 um element, and a working pressure range of 0.15-0.9 MPa (20-130 psi), with a 60 cc condensate bowl and a total weight of 500 g.
The diversion structure inside spins the incoming air to separate liquid water and solid particles, dropping them into the drain bowl while the balanced regulator holds the outlet pressure steady. The pressed-in self-locking knob resists drift from vibration, and the unit is rated for -5 to 70 C with a maximum supply of 1.0 MPa (145 psi). This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac GAFR Adjustable Filter Regulator GAFR30010SJNT |
|---|---|
| Series | GAFR300 filter & regulator |
| Port size | 3/8" (NPT thread) |
| Filtering grade | 40 µm |
| Pressure range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Type | Standard |
| Bowl material | PC |
| Drain type | Semi-auto drain + manual drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 60 cc |
| Bracket | Not included (J) |
| Weight | 500 g |
Specifications follow the official AirTAC GAFR catalogue (pages 235-236). Air must not freeze in the unit. No gauge is supplied with this model — the gauge connection on a GAFR300 is 1/8" if you add one. This unit filters and regulates only; it does not add lubrication.
| GAFR300 | GA300 series filter & regulator — sets the port range, drain-bowl capacity and weight. |
|---|---|
| (blank) | Bowl material: PC. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 10 | Port size 3/8". This body offers 08 = 1/4", 10 = 3/8", 15 = 1/2". |
| (blank) | Drain: Semi-auto drain + manual drain. |
| S | Standard type — 0.15 - 0.9 MPa (20 - 130 psi). This body offers Standard (S) or Lower pressure (L). |
| J | No bracket (J) — supplied without the mounting bracket. |
| N | No pressure gauge; 1/8" gauge connection. |
| (blank) | Filtering grade 40 µm. |
| T | NPT thread; gauge scale psi / bar. |
| (blank) | No reverse-flow valve. |
The filter and the regulator are ONE body here — there is no separate GAF filter or GAR regulator part to assemble. Need lubrication downstream too? Add a lubricator by ordering the matching GAFC300-10 F.R.L. combination instead.
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAFR300 · 3/8" · curve to 3500 L/min |
|---|---|
| One size down | GAFR200 |
| One size up | GAFR400 (curve to 7000 L/min) |
| Add a lubricator | GAFC300-10 (F.R.L. combination) |
Feed a compact pneumatic jig or clamping fixture on an assembly bench, where the 3/8in port matches small actuators and the 40 um element protects the valve from particulates.
Supply filtered air to a small machine tool's control circuit, where the balanced regulator keeps the set pressure stable as the shop compressor cycles.
Power a short conveyor section with a few cylinders, using the semi-auto drain to purge condensate during regular maintenance stops.
Choose this GAFR300 body for a 3/8in line that needs both filtration and pressure control in one mounting footprint. The PC bowl is the standard build, and the semi-auto drain plus manual drain are both fitted, so you can drain on demand or let the semi-auto function release condensate when pressure drops. The J code means no mounting bracket is included, so plan for a panel mount or an existing bracket, and the N code means no gauge is supplied, though the 1/8in gauge connection is there if you add one later. The 40 um element handles general shop air, and the NPT thread carries an MPa/psi gauge scale if a gauge is fitted. If your line needs lubrication downstream, order the matching GAFC300-10 combination instead of this unit. The 500 g body with its 60 cc bowl is best supported by a proper mount, not by the tubing, and its flow curve is plotted to 3500 L/min at 0.7 MPa inlet. A 1.0 MPa max supply leaves about 0.1 MPa above the 0.9 MPa top of the range.
Quick checklist
This is a filter and regulator only — it delivers filtered, pressure-set air with no added oil. If a downstream tool needs lubrication, add a separate lubricator or order the GAFC300-10 combination; do not expect an oil mist from this unit.
The GAFR30010SJNT is a filter & regulator with a 3/8in port, 0.15-0.9 MPa (20-130 psi) working range, 1.0 MPa (145 psi) max pressure, 1.5 MPa (215 psi) proof pressure, and -5 to 70 C temperature range. It has a 60 cc drain bowl, weighs 500 g, uses a 40 um element, and has a 1/8in gauge connection. The flow curve is plotted to 3500 L/min at 0.7 MPa inlet.
The J code omits the mounting bracket for installations that use a panel mount or an existing bracket, and the N code omits the gauge for setups that read pressure elsewhere. The 1/8in gauge connection is still present, so you can add a gauge later if needed.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.