
The AirTAC GAFR Adjustable Filter Regulator GAFR30010SJNTK is a genuine two-in-one filter & regulator — a diversion-type water/particulate filter and a balanced pressure regulator built into ONE body. It has 3/8" ports, a 40 µm filter element and regulates 0.15 - 0.9 MPa (20 - 130 psi). It has no lubricator, so it adds no oil to the airflow.
The GAFR30010SJNTK is a genuine AirTAC filter and regulator combined into a single body, saving rail space compared to separate units. It handles a 3/8in port with a 40 um element, working range of 0.15-0.9 MPa (20-130 psi), and a 60 cc condensate bowl.
This PC-bowl version weighs 500 g and comes without a gauge, so the 1/8in gauge connection is available if you add one later. A reverse-flow valve is fitted, and the semi-auto plus manual drain gives you two ways to empty the bowl. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac GAFR Adjustable Filter Regulator GAFR30010SJNTK |
|---|---|
| Series | GAFR300 filter & regulator |
| Port size | 3/8" (NPT thread) |
| Filtering grade | 40 µm |
| Pressure range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Type | Standard |
| Bowl material | PC |
| Drain type | Semi-auto drain + manual drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 60 cc |
| Bracket | Not included (J) |
| Weight | 500 g |
Specifications follow the official AirTAC GAFR catalogue (pages 235-236). Air must not freeze in the unit. No gauge is supplied with this model — the gauge connection on a GAFR300 is 1/8" if you add one. This unit filters and regulates only; it does not add lubrication.
| GAFR300 | GA300 series filter & regulator — sets the port range, drain-bowl capacity and weight. |
|---|---|
| (blank) | Bowl material: PC. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 10 | Port size 3/8". This body offers 08 = 1/4", 10 = 3/8", 15 = 1/2". |
| (blank) | Drain: Semi-auto drain + manual drain. |
| S | Standard type — 0.15 - 0.9 MPa (20 - 130 psi). This body offers Standard (S) or Lower pressure (L). |
| J | No bracket (J) — supplied without the mounting bracket. |
| N | No pressure gauge; 1/8" gauge connection. |
| (blank) | Filtering grade 40 µm. |
| T | NPT thread; gauge scale psi / bar. |
| K | Reverse-flow (reflux) valve attached. |
The filter and the regulator are ONE body here — there is no separate GAF filter or GAR regulator part to assemble. Need lubrication downstream too? Add a lubricator by ordering the matching GAFC300-10 F.R.L. combination instead.
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAFR300 · 3/8" · curve to 3500 L/min |
|---|---|
| One size down | GAFR200 |
| One size up | GAFR400 (curve to 7000 L/min) |
| Add a lubricator | GAFC300-10 (F.R.L. combination) |
Feed a single clamping fixture on an assembly bench where stable pressure below 0.9 MPa keeps hold force consistent. The 40 um filter protects small valves from particle wear.
Supply a lathe or mill's air cylinder with filtered air at a set pressure. The 60 cc bowl handles typical condensate between shifts, and the manual drain gives quick service.
Power a pneumatic test rig requiring clean air at a regulated pressure. The 3/8in port suits short runs to actuators, and the 500 g mass mounts easily on a frame.
Choose the GAFR300 body for medium-flow lines; its 3500 L/min curve at 0.7 MPa inlet sits between the smaller GAFR200 and larger GAFR400. The PC bowl suits general industrial use, while the 40 um element handles standard filtration needs. This model has no bracket (J), so plan a panel mount or existing support. The semi-auto drain plus manual drain means you can empty it automatically or by hand. This order code has NPT ports (the T in the code); the PT and G versions are separate order codes. The reflux valve is included as an ordering option. If you need oil downstream, order the matching GAFC300-10 combination instead. Note that 1.0 MPa max supply leaves about 0.1 MPa above the 0.9 MPa top of the range.
Quick checklist
This is a filter and regulator only — it delivers filtered, pressure-set air with no added oil. If a downstream tool needs lubrication, add a separate lubricator or order the GAFC300-10 combination; do not expect an oil mist from this unit.
Working pressure is 0.15-0.9 MPa (20-130 psi), max pressure 1.0 MPa (145 psi), proof pressure 1.5 MPa (215 psi), temperature range -5 to 70 C. The drain bowl holds 60 cc and the unit weighs 500 g. It has a 3/8in port, 40 um element, and no gauge.
The K code adds a reverse-flow valve as an ordering difference, while the N code omits the gauge. The 1/8in gauge connection is there if you add one later. The reflux valve is a separate option you selected; its function is detailed in the catalogue.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.