
The AirTAC GAFR Adjustable Filter Regulator GAFR30010SJTK is a genuine two-in-one filter & regulator — a diversion-type water/particulate filter and a balanced pressure regulator built into ONE body. It has 3/8" ports, a 40 µm filter element and regulates 0.15 - 0.9 MPa (20 - 130 psi). It has no lubricator, so it adds no oil to the airflow.
The GAFR30010SJTK is a genuine AirTAC filter & regulator that combines air filtration and pressure regulation in a single body, eliminating the need for separate components. This 3/8in unit operates in the standard 0.15-0.9 MPa (20-130 psi) range and comes with a 40 um element to trap solid particles and separate liquid water.
Its balanced, self-locking regulator holds the outlet pressure steady as supply varies, while the pressed-in knob resists drift from vibration. The diversion structure spins incoming air to drop water and solids into the 60 cc condensate bowl, which you drain manually or via the semi-auto drain. This model ships without a mounting bracket, and the reverse-flow (reflux) valve is fitted as an ordering difference. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac GAFR Adjustable Filter Regulator GAFR30010SJTK |
|---|---|
| Series | GAFR300 filter & regulator |
| Port size | 3/8" (NPT thread) |
| Filtering grade | 40 µm |
| Pressure range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Type | Standard |
| Bowl material | PC |
| Drain type | Semi-auto drain + manual drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 60 cc |
| Bracket | Not included (J) |
| Weight | 500 g |
Specifications follow the official AirTAC GAFR catalogue (pages 235-236). Air must not freeze in the unit. The fitted circular gauge reads in psi / bar, set by the NPT thread code. This unit filters and regulates only; it does not add lubrication.
| GAFR300 | GA300 series filter & regulator — sets the port range, drain-bowl capacity and weight. |
|---|---|
| (blank) | Bowl material: PC. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 10 | Port size 3/8". This body offers 08 = 1/4", 10 = 3/8", 15 = 1/2". |
| (blank) | Drain: Semi-auto drain + manual drain. |
| S | Standard type — 0.15 - 0.9 MPa (20 - 130 psi). This body offers Standard (S) or Lower pressure (L). |
| J | No bracket (J) — supplied without the mounting bracket. |
| (blank) | Circular pressure gauge fitted. |
| (blank) | Filtering grade 40 µm. |
| T | NPT thread; gauge scale psi / bar. |
| K | Reverse-flow (reflux) valve attached. |
The filter and the regulator are ONE body here — there is no separate GAF filter or GAR regulator part to assemble. Need lubrication downstream too? Add a lubricator by ordering the matching GAFC300-10 F.R.L. combination instead.
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAFR300 · 3/8" · curve to 3500 L/min |
|---|---|
| One size down | GAFR200 |
| One size up | GAFR400 (curve to 7000 L/min) |
| Add a lubricator | GAFC300-10 (F.R.L. combination) |
Feed a single precision jig or a small indexing table with clean, regulated air. The 3/8in port and 40 um element protect sensitive clamping valves from water and particulates.
Use on a pneumatic test bench where a steady 0.15-0.9 MPa supply is needed for calibration or cycle testing. The self-locking knob holds the setpoint even when the bench vibrates.
Supply one air cylinder or a small rotary actuator on a dedicated station. The 60 cc bowl gives a reasonable service interval for a single-user line, and the semi-auto drain handles routine condensate.
Choose the GAFR300 body for 3/8in ports with a 60 cc drain bowl and a flow curve plotted to 3500 L/min at 0.7 MPa inlet. The PC bowl suits general-purpose lines; if you need a metal or nylon bowl, order the C or N code instead. This unit has the semi-auto plus manual drain, so you can either let it purge automatically or drain it by hand. The standard S type covers 0.15-0.9 MPa (20-130 psi); if your application only needs low pressure, the L type tops out at 0.4 MPa. The J code means no bracket is included, so plan a panel mount or use an existing bracket. A circular gauge with MPa/psi scale is fitted, and the NPT thread matches that scale. The 40 um element is the standard grade; choose W for 5 um if you need finer filtration. The K code adds the reverse-flow valve. If you need lubrication downstream, order the matching GAFC300-10 combination instead. Note that the 1.0 MPa max supply leaves about 0.1 MPa above the 0.9 MPa top of the range, so plan your inlet pressure near 1.0 MPa if you intend to set the regulator to its maximum.
Quick checklist
This is a filter and regulator only — it delivers filtered, pressure-set air with no added oil. If a downstream tool needs lubrication, add a separate lubricator or order the GAFC300-10 combination; do not expect an oil mist from this unit.
The GAFR30010SJTK is a filter & regulator with a 3/8in port, working pressure range of 0.15-0.9 MPa (20-130 psi), maximum pressure of 1.0 MPa (145 psi), and proof pressure of 1.5 MPa (215 psi). It operates from -5 to 70 C and must not freeze. The drain bowl holds 60 cc, and the unit weighs 500 g.
The K code indicates the reverse-flow (reflux) valve is fitted to this unit. It is an ordering difference from a standard GAFR without the K code. The catalogue does not detail its function in our data, so treat it as a specified option for your order.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.