
The AirTAC GAFR Adjustable Filter Regulator GAFR30010SNT is a genuine two-in-one filter & regulator — a diversion-type water/particulate filter and a balanced pressure regulator built into ONE body. It has 3/8" ports, a 40 µm filter element and regulates 0.15 - 0.9 MPa (20 - 130 psi). It has no lubricator, so it adds no oil to the airflow.
The GAFR30010SNT is a filter & regulator that combines both functions in a single body, saving rail space and reducing potential leak points compared to separate units. This 3/8in version handles 0.15-0.9 MPa (20-130 psi) and comes with a 40 um element.
The diversion structure spins incoming air to separate liquid water and solid particles into the 60 cc drain bowl. The balanced, self-locking regulator maintains the set outlet pressure even as supply pressure fluctuates, resisting drift from vibration. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac GAFR Adjustable Filter Regulator GAFR30010SNT |
|---|---|
| Series | GAFR300 filter & regulator |
| Port size | 3/8" (NPT thread) |
| Filtering grade | 40 µm |
| Pressure range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Type | Standard |
| Bowl material | PC |
| Drain type | Semi-auto drain + manual drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 60 cc |
| Bracket | Included |
| Weight | 500 g |
Specifications follow the official AirTAC GAFR catalogue (pages 235-236). Air must not freeze in the unit. No gauge is supplied with this model — the gauge connection on a GAFR300 is 1/8" if you add one. This unit filters and regulates only; it does not add lubrication.
| GAFR300 | GA300 series filter & regulator — sets the port range, drain-bowl capacity and weight. |
|---|---|
| (blank) | Bowl material: PC. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 10 | Port size 3/8". This body offers 08 = 1/4", 10 = 3/8", 15 = 1/2". |
| (blank) | Drain: Semi-auto drain + manual drain. |
| S | Standard type — 0.15 - 0.9 MPa (20 - 130 psi). This body offers Standard (S) or Lower pressure (L). |
| (blank) | Mounting bracket included. |
| N | No pressure gauge; 1/8" gauge connection. |
| (blank) | Filtering grade 40 µm. |
| T | NPT thread; gauge scale psi / bar. |
| (blank) | No reverse-flow valve. |
The filter and the regulator are ONE body here — there is no separate GAF filter or GAR regulator part to assemble. Need lubrication downstream too? Add a lubricator by ordering the matching GAFC300-10 F.R.L. combination instead.
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAFR300 · 3/8" · curve to 3500 L/min |
|---|---|
| One size down | GAFR200 |
| One size up | GAFR400 (curve to 7000 L/min) |
| Add a lubricator | GAFC300-10 (F.R.L. combination) |
Feed a single pneumatic clamp or fixture with stable pressure. The self-locking regulator holds the setpoint despite supply fluctuations, keeping clamping force consistent.
Maintain steady air pressure for a conveyor belt tensioning cylinder. The 40 um filter protects the cylinder from particulates that could cause wear.
Supply a test bench with clean, regulated air. The 3/8in port matches common shop fittings, and the semi-auto drain allows quick manual purging between test cycles.
Choose the GAFR300 for medium-flow applications up to 3/8in or 1/2in ports. The 60 cc drain bowl holds more condensate than the GAFR200's 25 cc, meaning less frequent draining. This model includes the mounting bracket and a semi-auto drain plus manual drain for flexible operation.
The PC bowl suits standard shop air; if you need a metal or nylon bowl, order the C or N code instead. The 40 um element is standard, while the W code upgrades to 5 um for finer filtration. No gauge is fitted, but the 1/8in gauge connection allows adding one later. For oil downstream, order the GAFC300-10 combination instead. 1.0 MPa max supply leaves about 0.1 MPa above the 0.9 MPa top of the range.
Quick checklist
This is a filter and regulator only — it delivers filtered, pressure-set air with no added oil. If a downstream tool needs lubrication, add a separate lubricator or order the GAFC300-10 combination; do not expect an oil mist from this unit.
The GAFR30010SNT is a filter & regulator with a 3/8in port, working pressure range of 0.15-0.9 MPa (20-130 psi), maximum pressure of 1.0 MPa (145 psi), and proof pressure of 1.5 MPa (215 psi). It operates in -5 to 70 C temperatures, has a 60 cc drain bowl, and weighs 500 g. The element is 40 um and the unit has a PC bowl.
This GAFR30010SNT has the N code, meaning no gauge is supplied. The 1/8in gauge connection is still present, so you can add a compatible AirTAC gauge later. Without a gauge, you cannot read the set pressure directly, so consider the standard version if you need visual confirmation.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.