
The AirTAC GAFR Adjustable Filter Regulator GAFR30015ALJNWT is a genuine two-in-one filter & regulator — a diversion-type water/particulate filter and a balanced pressure regulator built into ONE body. It has 1/2" ports, a 5 µm filter element and regulates 0.15 - 0.4 MPa (20 - 58 psi). It has no lubricator, so it adds no oil to the airflow.
The GAFR30015ALJNWT is a filter and regulator combined in one body, cleaning incoming air and holding a steady outlet pressure without a separate filter-regulator pair. This 1/2in unit works in the lower 0.15-0.4 MPa (20-58 psi) band and uses a 5 um element to trap fine particles.
A diversion structure spins the air so liquid water and solid debris drop into the 60 cc condensate bowl, while the balanced regulator keeps the set pressure stable as supply varies. The pressed-in self-locking knob resists drift from vibration, and the automatic drain clears collected liquid without manual attention. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac GAFR Adjustable Filter Regulator GAFR30015ALJNWT |
|---|---|
| Series | GAFR300 filter & regulator |
| Port size | 1/2" (NPT thread) |
| Filtering grade | 5 µm |
| Pressure range | 0.15 - 0.4 MPa (20 - 58 psi) |
| Type | Lower pressure |
| Bowl material | PC |
| Drain type | Automatic drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 60 cc |
| Bracket | Not included (J) |
| Weight | 500 g |
Specifications follow the official AirTAC GAFR catalogue (pages 235-236). Air must not freeze in the unit. No gauge is supplied with this model — the gauge connection on a GAFR300 is 1/8" if you add one. This unit filters and regulates only; it does not add lubrication.
| GAFR300 | GA300 series filter & regulator — sets the port range, drain-bowl capacity and weight. |
|---|---|
| (blank) | Bowl material: PC. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 15 | Port size 1/2". This body offers 08 = 1/4", 10 = 3/8", 15 = 1/2". |
| A | Drain: Automatic drain. |
| L | Lower pressure type — 0.15 - 0.4 MPa (20 - 58 psi). This body offers Standard (S) or Lower pressure (L). |
| J | No bracket (J) — supplied without the mounting bracket. |
| N | No pressure gauge; 1/8" gauge connection. |
| W | Filtering grade 5 µm. |
| T | NPT thread; gauge scale psi / bar. |
| (blank) | No reverse-flow valve. |
The filter and the regulator are ONE body here — there is no separate GAF filter or GAR regulator part to assemble. Need lubrication downstream too? Add a lubricator by ordering the matching GAFC300-15 F.R.L. combination instead.
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAFR300 · 1/2" · curve to 3500 L/min |
|---|---|
| One size down | GAFR200 |
| One size up | GAFR400 (curve to 7000 L/min) |
| Add a lubricator | GAFC300-15 (F.R.L. combination) |
Feed a bank of small pilot valves on an assembly fixture with clean, regulated air at a stable lower pressure, protecting sensitive spools from supply fluctuations.
Maintain a gentle, consistent pressure on a belt tensioner cylinder in a packaging line, where the 5 um element keeps fine dust from clogging the control port.
Supply a test bench or measurement instrument that needs fine filtration and a low, stable pressure, with the automatic drain handling condensate during long runs.
Choose the GAFR300 body for 1/2in ports with a 3500 L/min flow curve at 0.7 MPa inlet, sitting between the smaller GAFR200 (2000 L/min) and larger GAFR400 (7000 L/min). The PC bowl suits general shop air, the 5 um element handles precision valves, and the automatic drain suits wet or unattended lines. This model omits the bracket and gauge, so plan a panel mount and add a gauge to the 1/8in connection if you need to read pressure. For lines needing oil downstream, order the matching GAFC300-15 combination instead. With a 1.0 MPa max supply, you have about 0.6 MPa of headroom above the 0.4 MPa top of this unit's regulated range.
Quick checklist
This is a filter and regulator only — it delivers filtered, pressure-set air with no added oil. If a downstream tool needs lubrication, add a separate lubricator or order the GAFC300-15 combination; do not expect an oil mist from this unit.
Working pressure is 0.15-0.4 MPa (20-58 psi), max pressure is 1.0 MPa (145 psi), proof pressure is 1.5 MPa (215 psi), and temperature range is -5 to 70 C. The drain bowl holds 60 cc and the unit weighs 500 g with a 1/2in port.
The J code omits the mounting bracket for panel-mount or existing brackets, and the N code means no gauge is supplied. The gauge connection is 1/8in if you add one later, and the set pressure cannot be read without fitting a gauge.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.