
The AirTAC GAFR Adjustable Filter Regulator GAFR30015ALJNWTK is a genuine two-in-one filter & regulator — a diversion-type water/particulate filter and a balanced pressure regulator built into ONE body. It has 1/2" ports, a 5 µm filter element and regulates 0.15 - 0.4 MPa (20 - 58 psi). It has no lubricator, so it adds no oil to the airflow.
The GAFR30015ALJNWTK is a filter and regulator combined into a single body, replacing the need for separate GAF filter and GAR regulator units. This 1/2in port model weighs 500 g and operates in the lower pressure range of 0.15-0.4 MPa (20-58 psi), with a 5 um element for finer filtration.
Its diversion structure spins incoming air to separate liquid water and solid particles into the 60 cc drain bowl, while the balanced, self-locking regulator maintains a steady outlet pressure. The automatic drain clears condensate without manual intervention, and the reverse-flow valve is fitted as an ordering difference. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac GAFR Adjustable Filter Regulator GAFR30015ALJNWTK |
|---|---|
| Series | GAFR300 filter & regulator |
| Port size | 1/2" (NPT thread) |
| Filtering grade | 5 µm |
| Pressure range | 0.15 - 0.4 MPa (20 - 58 psi) |
| Type | Lower pressure |
| Bowl material | PC |
| Drain type | Automatic drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 60 cc |
| Bracket | Not included (J) |
| Weight | 500 g |
Specifications follow the official AirTAC GAFR catalogue (pages 235-236). Air must not freeze in the unit. No gauge is supplied with this model — the gauge connection on a GAFR300 is 1/8" if you add one. This unit filters and regulates only; it does not add lubrication.
| GAFR300 | GA300 series filter & regulator — sets the port range, drain-bowl capacity and weight. |
|---|---|
| (blank) | Bowl material: PC. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 15 | Port size 1/2". This body offers 08 = 1/4", 10 = 3/8", 15 = 1/2". |
| A | Drain: Automatic drain. |
| L | Lower pressure type — 0.15 - 0.4 MPa (20 - 58 psi). This body offers Standard (S) or Lower pressure (L). |
| J | No bracket (J) — supplied without the mounting bracket. |
| N | No pressure gauge; 1/8" gauge connection. |
| W | Filtering grade 5 µm. |
| T | NPT thread; gauge scale psi / bar. |
| K | Reverse-flow (reflux) valve attached. |
The filter and the regulator are ONE body here — there is no separate GAF filter or GAR regulator part to assemble. Need lubrication downstream too? Add a lubricator by ordering the matching GAFC300-15 F.R.L. combination instead.
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAFR300 · 1/2" · curve to 3500 L/min |
|---|---|
| One size down | GAFR200 |
| One size up | GAFR400 (curve to 7000 L/min) |
| Add a lubricator | GAFC300-15 (F.R.L. combination) |
Feed a bank of precision pneumatic valves on a 1/2in manifold, where the 5 um element protects fine orifices and the lower pressure range suits sensitive actuators.
Supply a single machine tool's air logic circuits with filtered, regulated air at a stable low pressure, with the automatic drain handling condensate from a wet compressor line.
Provide a clean, stable 0.15-0.4 MPa air supply to a laboratory test fixture, where the 5 um filtration prevents particle contamination of measurement instruments.
Choose the GAFR300 body for 1/2in port applications needing up to 3500 L/min flow at 0.7 MPa inlet; step up to the GAFR400 for a 7000 L/min envelope if you need more capacity. The PC bowl suits standard shop air, the automatic drain handles wet or unattended lines, and the omitted bracket (J) suits panel mounting. The 5 um element traps finer particles than the standard 40 um, and the lower-pressure type tops out at 0.4 MPa. The gauge connection is 1/8in if you add one later, and the NPT thread matches MPa/psi scale gauges. If oil is needed downstream, order the matching GAFC300-15 combination instead. 1.0 MPa max supply leaves about 0.6 MPa above the 0.4 MPa top of the range.
Quick checklist
This is a filter and regulator only — it delivers filtered, pressure-set air with no added oil. If a downstream tool needs lubrication, add a separate lubricator or order the GAFC300-15 combination; do not expect an oil mist from this unit.
This filter & regulator has a 1/2in port, a pressure range of 0.15-0.4 MPa (20-58 psi), a maximum pressure of 1.0 MPa (145 psi), and a proof pressure of 1.5 MPa (215 psi). It operates from -5 to 70 C, has a 60 cc drain bowl, and weighs 500 g.
The L code sets the lower pressure range (0.15-0.4 MPa) for applications that only need modest pressure, while the W code specifies a 5 um element for finer filtration. The reverse-flow valve (K) is fitted as an ordering difference, and the J code means no mounting bracket is included.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.