
The AirTAC GAFR Adjustable Filter Regulator GAFR30015ALJTK is a genuine two-in-one filter & regulator — a diversion-type water/particulate filter and a balanced pressure regulator built into ONE body. It has 1/2" ports, a 40 µm filter element and regulates 0.15 - 0.4 MPa (20 - 58 psi). It has no lubricator, so it adds no oil to the airflow.
The GAFR30015ALJTK is a filter and regulator combined into a single body, so incoming air is spun to separate liquid water and trap solid particles before a balanced regulator sets a steady outlet pressure. This 1/2in unit covers 0.15-0.4 MPa (20-58 psi) with a 40 um element, and it has no lubricator - the only bowl is the 60 cc condensate chamber.
A pressed-in self-locking knob resists set-pressure drift from vibration, while the automatic drain clears condensate without manual attention. At 500 g, this GAFR300 body needs proper panel or frame support rather than relying on the tubing, and it replaces the need for separate GAF filter and GAR regulator parts in one compact footprint. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac GAFR Adjustable Filter Regulator GAFR30015ALJTK |
|---|---|
| Series | GAFR300 filter & regulator |
| Port size | 1/2" (NPT thread) |
| Filtering grade | 40 µm |
| Pressure range | 0.15 - 0.4 MPa (20 - 58 psi) |
| Type | Lower pressure |
| Bowl material | PC |
| Drain type | Automatic drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 60 cc |
| Bracket | Not included (J) |
| Weight | 500 g |
Specifications follow the official AirTAC GAFR catalogue (pages 235-236). Air must not freeze in the unit. The fitted circular gauge reads in psi / bar, set by the NPT thread code. This unit filters and regulates only; it does not add lubrication.
| GAFR300 | GA300 series filter & regulator — sets the port range, drain-bowl capacity and weight. |
|---|---|
| (blank) | Bowl material: PC. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 15 | Port size 1/2". This body offers 08 = 1/4", 10 = 3/8", 15 = 1/2". |
| A | Drain: Automatic drain. |
| L | Lower pressure type — 0.15 - 0.4 MPa (20 - 58 psi). This body offers Standard (S) or Lower pressure (L). |
| J | No bracket (J) — supplied without the mounting bracket. |
| (blank) | Circular pressure gauge fitted. |
| (blank) | Filtering grade 40 µm. |
| T | NPT thread; gauge scale psi / bar. |
| K | Reverse-flow (reflux) valve attached. |
The filter and the regulator are ONE body here — there is no separate GAF filter or GAR regulator part to assemble. Need lubrication downstream too? Add a lubricator by ordering the matching GAFC300-15 F.R.L. combination instead.
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAFR300 · 1/2" · curve to 3500 L/min |
|---|---|
| One size down | GAFR200 |
| One size up | GAFR400 (curve to 7000 L/min) |
| Add a lubricator | GAFC300-15 (F.R.L. combination) |
Set a stable 0.3 MPa supply for a sensitive pneumatic positioner or a small indexing table, where the lower pressure range gives finer adjustment resolution.
Feed a single-station assembly fixture with clean, regulated air at 0.35 MPa, using the automatic drain to handle condensate from a humid compressor line.
Supply a test jig that needs a precise low-pressure air source, with the fitted gauge confirming the setpoint and the 1/2in port allowing flexible hose routing.
Choose the GAFR300 body when you need a 1/2in port with a 60 cc drain bowl and a flow curve plotted to 3500 L/min at 0.7 MPa inlet. The L type tops out at 0.4 MPa, so if your machine may ever require more than that, select the standard S type instead. This model has an automatic drain (A), a PC bowl, no mounting bracket (J), and a fitted circular gauge with MPa/psi scale. The 40 um element suits general shop air, while the K code adds a reverse-flow valve as an ordering difference. If oil is needed downstream, order the matching GAFC300-15 combination rather than this unit. The 1.0 MPa max supply leaves about 0.6 MPa above the 0.4 MPa top of the range.
Quick checklist
This is a filter and regulator only — it delivers filtered, pressure-set air with no added oil. If a downstream tool needs lubrication, add a separate lubricator or order the GAFC300-15 combination; do not expect an oil mist from this unit.
This filter & regulator has a 1/2in port, a pressure range of 0.15-0.4 MPa (20-58 psi), a maximum pressure of 1.0 MPa (145 psi), and a proof pressure of 1.5 MPa (215 psi). It operates from -5 to 70 C, has a 60 cc drain bowl, and weighs 500 g. The 40 um element filters solids, and the automatic drain clears condensate.
The L code sets the regulated range to 0.15-0.4 MPa, which suits applications needing a low, stable pressure rather than the standard 0.9 MPa ceiling. The K code indicates a reverse-flow valve is fitted, which is an ordering difference; its detailed function is covered in the catalogue. This unit has no lubricator - if you need oil downstream, select the GAFC300-15 combination.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.