verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC GAFR300 · Filter & Regulator (Filter + Pressure Regulator, One Body)

Airtac GAFR Adjustable Filter Regulator GAFR30015ALNTK

The AirTAC GAFR Adjustable Filter Regulator GAFR30015ALNTK is a genuine two-in-one filter & regulator — a diversion-type water/particulate filter and a balanced pressure regulator built into ONE body. It has 1/2" ports, a 40 µm filter element and regulates 0.15 - 0.4 MPa (20 - 58 psi). It has no lubricator, so it adds no oil to the airflow.

  • TypeFilter & regulator
  • Port size1/2"
  • Pressure range0.15 - 0.4 MPa (20 - 58 psi)
  • Filtering grade40 µm
  • Bowl materialPC
  • Drainautomatic
  • Pressure gaugeNot fitted
  • Weight500 g
$54.77 $62.27Save 12% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every GAFR300-15 bowl, gauge and thread option on one page All GAFR300-15 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac GAFR Adjustable Filter Regulator GAFR30015ALNTK

The GAFR30015ALNTK is a filter and regulator combined in a single body, so it cleans the air and sets a steady outlet pressure without needing a separate filter plus regulator pair. This 1/2in version has a 40 um element and a lower-pressure range of 0.15-0.4 MPa (20-58 psi), with a 60 cc condensate bowl and a 500 g mass that suits a fixed panel mount.

Its automatic drain clears collected water without manual attention, and the reverse-flow (reflux) valve is fitted as an ordering difference. The balanced regulator holds the set pressure as supply varies, and the pressed-in knob resists drift from vibration, so the outlet stays stable in service. This version has NPT ports (the T in the order code) for North American pipe fittings.

Airtac GAFR Adjustable Filter Regulator GAFR30015ALNTK Technical Specifications

ModelAirtac GAFR Adjustable Filter Regulator GAFR30015ALNTK
SeriesGAFR300 filter & regulator
Port size1/2" (NPT thread)
Filtering grade40 µm
Pressure range0.15 - 0.4 MPa (20 - 58 psi)
TypeLower pressure
Bowl materialPC
Drain typeAutomatic drain
FluidAir
Max. pressure1.0 MPa (145 psi)
Proof pressure1.5 MPa (215 psi)
Temperature range-5 to +70 °C (unfreeze)
Capacity of drain bowl60 cc
BracketIncluded
Weight500 g

Specifications follow the official AirTAC GAFR catalogue (pages 235-236). Air must not freeze in the unit. No gauge is supplied with this model — the gauge connection on a GAFR300 is 1/8" if you add one. This unit filters and regulates only; it does not add lubrication.

Model Code: Airtac GAFR Adjustable Filter Regulator GAFR30015ALNTK

GAFR300GA300 series filter & regulator — sets the port range, drain-bowl capacity and weight.
(blank)Bowl material: PC. Available on this body: PC (blank), Metal (C), Nylon (N).
15Port size 1/2". This body offers 08 = 1/4", 10 = 3/8", 15 = 1/2".
ADrain: Automatic drain.
LLower pressure type — 0.15 - 0.4 MPa (20 - 58 psi). This body offers Standard (S) or Lower pressure (L).
(blank)Mounting bracket included.
NNo pressure gauge; 1/8" gauge connection.
(blank)Filtering grade 40 µm.
TNPT thread; gauge scale psi / bar.
KReverse-flow (reflux) valve attached.

The filter and the regulator are ONE body here — there is no separate GAF filter or GAR regulator part to assemble. Need lubrication downstream too? Add a lubricator by ordering the matching GAFC300-15 F.R.L. combination instead.

Size Class & Flow Envelope

  • GAFR2001/8"-1/4" · 2000 L/min
  • GAFR3001/4"-1/2" · 3500 L/min
  • GAFR4003/8"-1/2" · 7000 L/min
  • GAFR5003/4" · 8000 L/min
  • GAFR6003/4"-1" · 12000 L/min

Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.

This modelGAFR300 · 1/2" · curve to 3500 L/min
One size downGAFR200
One size upGAFR400 (curve to 7000 L/min)
Add a lubricatorGAFC300-15 (F.R.L. combination)

Where the Airtac GAFR Adjustable Filter Regulator GAFR30015ALNTK Is Used

precision_manufacturing

Precision valve control

Feed a single precision valve or a small instrument loop that needs a stable, low-pressure supply. The balanced regulator holds the setpoint as line pressure fluctuates, and the 40 um element protects the valve from particles.

factory

Wet-line automation cell

Use on a machine cell with frequent condensate in the air. The automatic drain clears the 60 cc bowl without operator rounds, keeping the lower-pressure setpoint steady for the cycle.

engineering

Bench test rig

Mount on a test bench where a 1/2in line feeds a regulated low-pressure zone. This order code has NPT ports (the T in the code); the PT and G versions are separate order codes.

Is the Airtac GAFR Adjustable Filter Regulator GAFR30015ALNTK the Right Air-Prep Unit?

Choose this GAFR300 body for 1/2in piping where the lower-pressure range (0.15-0.4 MPa) is sufficient; if the machine may ever need more than 0.4 MPa, select the standard S type instead. The PC bowl and automatic drain suit a clean, dry environment with wet lines, while the included bracket and NPT thread (MPa/psi gauge scale) match most installations. The 5 um element option (W) is available if finer filtration is needed, and the no-gauge version leaves the 1/8in gauge connection open for a later add-on. For oil downstream, order the matching GAFC300-15 combination rather than this unit. 1.0 MPa max supply leaves about 0.6 MPa above the 0.4 MPa top of the range.

Quick checklist

  • ✓ Body size for your peak flow (1/2" here)
  • ✓ Standard 0.9 MPa or lower-pressure 0.4 MPa
  • ✓ Bowl material: PC (blank), Metal (C), Nylon (N)
  • ✓ Drain: semi-auto + manual, or automatic
  • ✓ Element 40 µm or 5 µm
  • ✓ Bracket kept or removed (J); add a lubricator = GAFC
Ask an Engineer

Installation & Maintenance Notes

  • check Install with the airflow arrow: IN to OUT, gauge/knob accessible.
  • check Keep inlet pressure at or below 1.0 MPa (145 psi).
  • check Set pressure with the pressed-in self-locking knob; pull to adjust, press to lock.
  • check Drain condensate before the 60 cc bowl fills.
  • check Keep the unit above freezing (-5 to +70 °C, unfreeze).
  • check Support the 500 g unit on its bracket, not on the tubing.

This is a filter and regulator only — it delivers filtered, pressure-set air with no added oil. If a downstream tool needs lubrication, add a separate lubricator or order the GAFC300-15 combination; do not expect an oil mist from this unit.

Airtac GAFR Adjustable Filter Regulator GAFR30015ALNTK FAQ

It is a filter & regulator with a 1/2in port, 0.15-0.4 MPa (20-58 psi) working range, 1.0 MPa (145 psi) max pressure, 1.5 MPa (215 psi) proof pressure, and -5 to 70 C temperature range. The drain bowl holds 60 cc, the unit weighs 500 g, and the element is 40 um.

The L code sets the range to 0.15-0.4 MPa for low-pressure applications, while the N after the port means no gauge is supplied; the 1/8in gauge connection is left open for a later add-on. The K code adds a reverse-flow (reflux) valve as an ordering difference.

T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Request a Quote for Airtac GAFR Adjustable Filter Regulator GAFR30015ALNTK

Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for GAFR30015ALNTK and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.