
The AirTAC GAFR Adjustable Filter Regulator GAFR30015ALWTK is a genuine two-in-one filter & regulator — a diversion-type water/particulate filter and a balanced pressure regulator built into ONE body. It has 1/2" ports, a 5 µm filter element and regulates 0.15 - 0.4 MPa (20 - 58 psi). It has no lubricator, so it adds no oil to the airflow.
The GAFR30015ALWTK is a filter and regulator combined into one body, so it cleans incoming air and stabilizes outlet pressure in a single compact unit. It has no lubricator and only one bowl, the 60 cc condensate bowl, which collects water and solids spun out by the diversion structure.
This model uses a 1/2in port, a lower-pressure range of 0.15-0.4 MPa (20-58 psi), and a 5 um element for finer filtration. The automatic drain clears condensate without manual attention, and the included circular gauge shows the set pressure on an MPa/psi scale. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac GAFR Adjustable Filter Regulator GAFR30015ALWTK |
|---|---|
| Series | GAFR300 filter & regulator |
| Port size | 1/2" (NPT thread) |
| Filtering grade | 5 µm |
| Pressure range | 0.15 - 0.4 MPa (20 - 58 psi) |
| Type | Lower pressure |
| Bowl material | PC |
| Drain type | Automatic drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 60 cc |
| Bracket | Included |
| Weight | 500 g |
Specifications follow the official AirTAC GAFR catalogue (pages 235-236). Air must not freeze in the unit. The fitted circular gauge reads in psi / bar, set by the NPT thread code. This unit filters and regulates only; it does not add lubrication.
| GAFR300 | GA300 series filter & regulator — sets the port range, drain-bowl capacity and weight. |
|---|---|
| (blank) | Bowl material: PC. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 15 | Port size 1/2". This body offers 08 = 1/4", 10 = 3/8", 15 = 1/2". |
| A | Drain: Automatic drain. |
| L | Lower pressure type — 0.15 - 0.4 MPa (20 - 58 psi). This body offers Standard (S) or Lower pressure (L). |
| (blank) | Mounting bracket included. |
| (blank) | Circular pressure gauge fitted. |
| W | Filtering grade 5 µm. |
| T | NPT thread; gauge scale psi / bar. |
| K | Reverse-flow (reflux) valve attached. |
The filter and the regulator are ONE body here — there is no separate GAF filter or GAR regulator part to assemble. Need lubrication downstream too? Add a lubricator by ordering the matching GAFC300-15 F.R.L. combination instead.
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAFR300 · 1/2" · curve to 3500 L/min |
|---|---|
| One size down | GAFR200 |
| One size up | GAFR400 (curve to 7000 L/min) |
| Add a lubricator | GAFC300-15 (F.R.L. combination) |
Feed a bank of precision pneumatic valves that need clean, low-pressure air at a steady 0.15-0.4 MPa, with the 5 um element protecting fine internal passages.
Supply a laboratory fixture or test rig that requires filtered air below 0.4 MPa, where the automatic drain keeps the bowl from flooding during long experiments.
Protect a single-station assembly machine with a 1/2in line, using the included bracket to mount the 500 g unit securely to a frame or panel.
Choose GAFR300 for a 1/2in port with a 60 cc drain bowl and a flow curve plotted to 3500 L/min at 0.7 MPa inlet; step down to GAFR200 for 1/4in ports or up to GAFR400 for 3/8in and 1/2in ports with a 100 cc bowl. The PC bowl suits general duty, while the 5 um element traps finer particles than the standard 40 um grade for sensitive equipment. The automatic drain handles wet or unattended lines, and the included bracket simplifies mounting; the reverse-flow valve is fitted as an ordering option. If oil is needed downstream, order the matching GAFC300-15 combination instead. Note that 1.0 MPa max supply leaves about 0.6 MPa above the 0.4 MPa top of the range.
Quick checklist
This is a filter and regulator only — it delivers filtered, pressure-set air with no added oil. If a downstream tool needs lubrication, add a separate lubricator or order the GAFC300-15 combination; do not expect an oil mist from this unit.
The GAFR30015ALWTK is a filter and regulator with a 1/2in port, a lower-pressure range of 0.15-0.4 MPa (20-58 psi), a maximum pressure of 1.0 MPa (145 psi), and a proof pressure of 1.5 MPa (215 psi). It operates from -5 to 70 C, has a 60 cc drain bowl, and weighs 500 g. The 5 um element and automatic drain are fitted, and the gauge reads MPa/psi.
The K code indicates a reverse-flow (reflux) valve is fitted to the GAFR30015ALWTK. It is an ordering difference from models without K; the catalogue does not specify its function in our data, so consult the full AirTAC documentation for operational details.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.