
The AirTAC GAFR Adjustable Filter Regulator GAFR30015ASNWTK is a genuine two-in-one filter & regulator — a diversion-type water/particulate filter and a balanced pressure regulator built into ONE body. It has 1/2" ports, a 5 µm filter element and regulates 0.15 - 0.9 MPa (20 - 130 psi). It has no lubricator, so it adds no oil to the airflow.
The GAFR30015ASNWTK is a filter and regulator combined in a single body, saving rail space and reducing potential leak points compared to separate units. It handles a 1/2in port and weighs 500 g, placing it in the mid-size class for shop-floor air preparation.
This version regulates from 0.15 to 0.9 MPa (20-130 psi) and filters to 5 um. It uses a diversion structure that spins the air to separate liquid water and solid particles into the 60 cc condensate bowl. The automatic drain clears collected liquid without manual attention, and the unit includes a mounting bracket for secure installation. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac GAFR Adjustable Filter Regulator GAFR30015ASNWTK |
|---|---|
| Series | GAFR300 filter & regulator |
| Port size | 1/2" (NPT thread) |
| Filtering grade | 5 µm |
| Pressure range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Type | Standard |
| Bowl material | PC |
| Drain type | Automatic drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 60 cc |
| Bracket | Included |
| Weight | 500 g |
Specifications follow the official AirTAC GAFR catalogue (pages 235-236). Air must not freeze in the unit. No gauge is supplied with this model — the gauge connection on a GAFR300 is 1/8" if you add one. This unit filters and regulates only; it does not add lubrication.
| GAFR300 | GA300 series filter & regulator — sets the port range, drain-bowl capacity and weight. |
|---|---|
| (blank) | Bowl material: PC. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 15 | Port size 1/2". This body offers 08 = 1/4", 10 = 3/8", 15 = 1/2". |
| A | Drain: Automatic drain. |
| S | Standard type — 0.15 - 0.9 MPa (20 - 130 psi). This body offers Standard (S) or Lower pressure (L). |
| (blank) | Mounting bracket included. |
| N | No pressure gauge; 1/8" gauge connection. |
| W | Filtering grade 5 µm. |
| T | NPT thread; gauge scale psi / bar. |
| K | Reverse-flow (reflux) valve attached. |
The filter and the regulator are ONE body here — there is no separate GAF filter or GAR regulator part to assemble. Need lubrication downstream too? Add a lubricator by ordering the matching GAFC300-15 F.R.L. combination instead.
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAFR300 · 1/2" · curve to 3500 L/min |
|---|---|
| One size down | GAFR200 |
| One size up | GAFR400 (curve to 7000 L/min) |
| Add a lubricator | GAFC300-15 (F.R.L. combination) |
The 5 um element protects sensitive pneumatic valves and instruments from fine particulate, while the balanced regulator holds a steady outlet pressure for consistent actuation.
A 1/2in port and 500 g body fit neatly into a machine tool's air prep zone, delivering filtered, regulated air to cylinders and tooling without taking up excessive space.
The automatic drain makes this unit a low-maintenance choice for an assembly line running continuously, preventing condensate buildup in the 60 cc bowl without operator intervention.
Choose the GAFR300 body for lines needing a 1/2in port and a flow envelope plotted to 3500 L/min at 0.7 MPa inlet. The 5 um element traps finer particles than the standard 40 um grade, making it suitable for precision valves, though it will require more frequent servicing. The automatic drain (A) suits unattended operation or wet compressed-air lines, while the included bracket simplifies mounting. This model has no gauge (N), so the set pressure cannot be read locally; the 1/8in gauge connection is available if you add one later. The reverse-flow (reflux) valve is fitted (K), and the NPT thread carries an MPa/psi gauge scale. If your process needs oil downstream, order the matching GAFC300-15 combination instead, as this unit does not lubricate. Remember that 1.0 MPa max supply leaves only about 0.1 MPa above the 0.9 MPa top of the regulated range, so plan your inlet pressure accordingly.
Quick checklist
This is a filter and regulator only — it delivers filtered, pressure-set air with no added oil. If a downstream tool needs lubrication, add a separate lubricator or order the GAFC300-15 combination; do not expect an oil mist from this unit.
The GAFR30015ASNWTK is a filter & regulator with a 1/2in port. It regulates from 0.15 to 0.9 MPa (20-130 psi), with a maximum supply pressure of 1.0 MPa (145 psi) and a proof pressure of 1.5 MPa (215 psi). The operating temperature range is -5 to 70 C. It has a 60 cc condensate bowl and weighs 500 g.
The 'K' indicates that a reverse-flow (reflux) valve is fitted to this unit. It is an ordering difference from models without the 'K'. The specific function of this valve is detailed in the catalogue; please refer to that documentation for its operational description.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.