
The AirTAC GAFR Adjustable Filter Regulator GAFR30015ASWT is a genuine two-in-one filter & regulator — a diversion-type water/particulate filter and a balanced pressure regulator built into ONE body. It has 1/2" ports, a 5 µm filter element and regulates 0.15 - 0.9 MPa (20 - 130 psi). It has no lubricator, so it adds no oil to the airflow.
The GAFR30015ASWT is a filter and regulator combined into a single body, eliminating the need for separate filter and regulator units. It handles a 1/2in port and delivers a regulated output from 0.15 to 0.9 MPa (20-130 psi), with a 5 um element for finer filtration. This 500 g unit integrates a diversion structure that spins the air to separate liquid water and solid particles into its 60 cc condensate bowl.
The automatic drain on this model clears collected condensate without manual intervention, making it suitable for unattended operation. The balanced, self-locking regulator mechanism helps maintain the set outlet pressure even as supply pressure fluctuates, resisting drift from vibration. This single-body design reduces potential leak points compared to a two-piece filter-plus-regulator setup. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac GAFR Adjustable Filter Regulator GAFR30015ASWT |
|---|---|
| Series | GAFR300 filter & regulator |
| Port size | 1/2" (NPT thread) |
| Filtering grade | 5 µm |
| Pressure range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Type | Standard |
| Bowl material | PC |
| Drain type | Automatic drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 60 cc |
| Bracket | Included |
| Weight | 500 g |
Specifications follow the official AirTAC GAFR catalogue (pages 235-236). Air must not freeze in the unit. The fitted circular gauge reads in psi / bar, set by the NPT thread code. This unit filters and regulates only; it does not add lubrication.
| GAFR300 | GA300 series filter & regulator — sets the port range, drain-bowl capacity and weight. |
|---|---|
| (blank) | Bowl material: PC. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 15 | Port size 1/2". This body offers 08 = 1/4", 10 = 3/8", 15 = 1/2". |
| A | Drain: Automatic drain. |
| S | Standard type — 0.15 - 0.9 MPa (20 - 130 psi). This body offers Standard (S) or Lower pressure (L). |
| (blank) | Mounting bracket included. |
| (blank) | Circular pressure gauge fitted. |
| W | Filtering grade 5 µm. |
| T | NPT thread; gauge scale psi / bar. |
| (blank) | No reverse-flow valve. |
The filter and the regulator are ONE body here — there is no separate GAF filter or GAR regulator part to assemble. Need lubrication downstream too? Add a lubricator by ordering the matching GAFC300-15 F.R.L. combination instead.
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAFR300 · 1/2" · curve to 3500 L/min |
|---|---|
| One size down | GAFR200 |
| One size up | GAFR400 (curve to 7000 L/min) |
| Add a lubricator | GAFC300-15 (F.R.L. combination) |
Feed a bank of precision pneumatic valves with cleaner 5 um filtered air at a stable pressure, protecting fine internal orifices from particle wear.
Supply a single machining fixture or a small automated assembly station where a 1/2in line and consistent pressure are needed for reliable cylinder motion.
Provide a clean, regulated air source for a laboratory test bench or calibration rig, where the 5 um element helps maintain air quality for sensitive instruments.
Choose this GAFR300 body for 1/2in port applications needing up to 3500 L/min flow (plotted at 0.7 MPa inlet). The PC bowl is the standard build; the automatic drain (A) suits wet or unattended lines, while the 5 um element (W) traps finer particles for sensitive equipment. The included mounting bracket simplifies installation, and the fitted circular gauge shows pressure on an MPa/psi scale. If your line requires lubrication downstream, order the matching GAFC300-15 combination instead. Note that a 1.0 MPa max supply leaves about 0.1 MPa above the 0.9 MPa top of the range.
Quick checklist
This is a filter and regulator only — it delivers filtered, pressure-set air with no added oil. If a downstream tool needs lubrication, add a separate lubricator or order the GAFC300-15 combination; do not expect an oil mist from this unit.
This filter & regulator has a 1/2in port, a working pressure range of 0.15-0.9 MPa (20-130 psi), a maximum pressure of 1.0 MPa (145 psi), and a proof pressure of 1.5 MPa (215 psi). It operates in temperatures from -5 to 70 C and must not freeze. The unit weighs 500 g and has a 60 cc condensate bowl.
The 'W' indicates a 5 um filtering element instead of the standard 40 um. This finer grade traps smaller particles, which is beneficial for precision valves or instrument air, but it will require more frequent servicing or replacement than a 40 um element.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.