
The AirTAC GAFR Adjustable Filter Regulator GAFR30015LJNTK is a genuine two-in-one filter & regulator — a diversion-type water/particulate filter and a balanced pressure regulator built into ONE body. It has 1/2" ports, a 40 µm filter element and regulates 0.15 - 0.4 MPa (20 - 58 psi). It has no lubricator, so it adds no oil to the airflow.
The GAFR30015LJNTK is a filter and regulator combined into one compact body, so a single unit handles both air preparation tasks. This model uses a 1/2in port, a 40 um element, and a lower-pressure range of 0.15-0.4 MPa (20-58 psi), with a PC bowl and no gauge.
Its diversion structure spins the airflow to separate liquid water and solid particles into the 60 cc drain bowl, while the balanced regulator keeps the outlet steady as supply pressure varies. The pressed-in self-locking knob resists drift from vibration, and the semi-auto plus manual drain gives you two ways to empty condensate. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac GAFR Adjustable Filter Regulator GAFR30015LJNTK |
|---|---|
| Series | GAFR300 filter & regulator |
| Port size | 1/2" (NPT thread) |
| Filtering grade | 40 µm |
| Pressure range | 0.15 - 0.4 MPa (20 - 58 psi) |
| Type | Lower pressure |
| Bowl material | PC |
| Drain type | Semi-auto drain + manual drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 60 cc |
| Bracket | Not included (J) |
| Weight | 500 g |
Specifications follow the official AirTAC GAFR catalogue (pages 235-236). Air must not freeze in the unit. No gauge is supplied with this model — the gauge connection on a GAFR300 is 1/8" if you add one. This unit filters and regulates only; it does not add lubrication.
| GAFR300 | GA300 series filter & regulator — sets the port range, drain-bowl capacity and weight. |
|---|---|
| (blank) | Bowl material: PC. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 15 | Port size 1/2". This body offers 08 = 1/4", 10 = 3/8", 15 = 1/2". |
| (blank) | Drain: Semi-auto drain + manual drain. |
| L | Lower pressure type — 0.15 - 0.4 MPa (20 - 58 psi). This body offers Standard (S) or Lower pressure (L). |
| J | No bracket (J) — supplied without the mounting bracket. |
| N | No pressure gauge; 1/8" gauge connection. |
| (blank) | Filtering grade 40 µm. |
| T | NPT thread; gauge scale psi / bar. |
| K | Reverse-flow (reflux) valve attached. |
The filter and the regulator are ONE body here — there is no separate GAF filter or GAR regulator part to assemble. Need lubrication downstream too? Add a lubricator by ordering the matching GAFC300-15 F.R.L. combination instead.
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAFR300 · 1/2" · curve to 3500 L/min |
|---|---|
| One size down | GAFR200 |
| One size up | GAFR400 (curve to 7000 L/min) |
| Add a lubricator | GAFC300-15 (F.R.L. combination) |
Set a precise low pressure for a sensitive pneumatic valve or a delicate clamping fixture, where the 0.15-0.4 MPa range gives fine control.
Feed a single bench-mounted cylinder or a small rotary actuator from a 1/2in line, with the filter protecting the moving parts from water and debris.
Use the semi-auto and manual drains on a service cart or test stand, where operators can quickly purge the 60 cc bowl between jobs.
Choose the GAFR300 body for a 1/2in port and a 500 g mass, which suits a compact machine header or a single larger actuator. The L type caps the regulated pressure at 0.4 MPa, so confirm your circuit never needs more than that; the J code means no mounting bracket is included, so plan for a panel or frame mount. The N code means no gauge is fitted, but the 1/8in gauge connection is ready if you add one later. The K code adds the reverse-flow (reflux) valve as an ordering difference, and the NPT thread gives an MPa/psi gauge scale. If your line needs oil downstream, order the matching GAFC300-15 combination instead. 1.0 MPa max supply leaves about 0.6 MPa above the 0.4 MPa top of the range.
Quick checklist
This is a filter and regulator only — it delivers filtered, pressure-set air with no added oil. If a downstream tool needs lubrication, add a separate lubricator or order the GAFC300-15 combination; do not expect an oil mist from this unit.
This filter & regulator has a 1/2in port, a pressure range of 0.15-0.4 MPa (20-58 psi), a max pressure of 1.0 MPa (145 psi), and a proof pressure of 1.5 MPa (215 psi). It operates from -5 to 70 C, has a 60 cc drain bowl, and weighs 500 g.
The N code after the port means no gauge is supplied, though the 1/8in connection is there for a later addition. The J code omits the mounting bracket, so you can use an existing bracket or a panel mount instead of the standard one.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.