
The AirTAC GAFR Adjustable Filter Regulator GAFR30015LJNWTK is a genuine two-in-one filter & regulator — a diversion-type water/particulate filter and a balanced pressure regulator built into ONE body. It has 1/2" ports, a 5 µm filter element and regulates 0.15 - 0.4 MPa (20 - 58 psi). It has no lubricator, so it adds no oil to the airflow.
The GAFR30015LJNWTK is a filter and regulator combined into a single body, so it cleans incoming air and locks a steady outlet pressure without needing a separate filter plus regulator pair. This 1/2in version runs on the lower-pressure band of 0.15-0.4 MPa (20-58 psi) and uses a 5 um element to trap fine particles for sensitive equipment.
Because the filter and regulator share one housing, there are fewer joints to seal and less rail space consumed than with two separate units. The 60 cc condensate bowl collects the water and solids spun out by the diversion structure, and the 500 g mass means it needs a proper panel or frame mount rather than support from the tubing. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac GAFR Adjustable Filter Regulator GAFR30015LJNWTK |
|---|---|
| Series | GAFR300 filter & regulator |
| Port size | 1/2" (NPT thread) |
| Filtering grade | 5 µm |
| Pressure range | 0.15 - 0.4 MPa (20 - 58 psi) |
| Type | Lower pressure |
| Bowl material | PC |
| Drain type | Semi-auto drain + manual drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 60 cc |
| Bracket | Not included (J) |
| Weight | 500 g |
Specifications follow the official AirTAC GAFR catalogue (pages 235-236). Air must not freeze in the unit. No gauge is supplied with this model — the gauge connection on a GAFR300 is 1/8" if you add one. This unit filters and regulates only; it does not add lubrication.
| GAFR300 | GA300 series filter & regulator — sets the port range, drain-bowl capacity and weight. |
|---|---|
| (blank) | Bowl material: PC. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 15 | Port size 1/2". This body offers 08 = 1/4", 10 = 3/8", 15 = 1/2". |
| (blank) | Drain: Semi-auto drain + manual drain. |
| L | Lower pressure type — 0.15 - 0.4 MPa (20 - 58 psi). This body offers Standard (S) or Lower pressure (L). |
| J | No bracket (J) — supplied without the mounting bracket. |
| N | No pressure gauge; 1/8" gauge connection. |
| W | Filtering grade 5 µm. |
| T | NPT thread; gauge scale psi / bar. |
| K | Reverse-flow (reflux) valve attached. |
The filter and the regulator are ONE body here — there is no separate GAF filter or GAR regulator part to assemble. Need lubrication downstream too? Add a lubricator by ordering the matching GAFC300-15 F.R.L. combination instead.
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAFR300 · 1/2" · curve to 3500 L/min |
|---|---|
| One size down | GAFR200 |
| One size up | GAFR400 (curve to 7000 L/min) |
| Add a lubricator | GAFC300-15 (F.R.L. combination) |
Feed a bank of precision pneumatic valves on a small assembly machine where the 5 um element protects fine internal passages and the lower pressure range prevents overdriving delicate actuators.
Supply instrument air to a lab test bench that needs a stable 0.15-0.4 MPa output and fine filtration, with the 60 cc bowl sized for moderate condensate buildup between manual drains.
Mount this 1/2in unit on a compact machine frame where the single-body design saves rail space and the no-bracket option lets you panel-mount it directly to existing hardware.
Choose the GAFR300 body when you need a 1/2in port and a 60 cc drain bowl, which holds about 2.4x the condensate of a GAFR200's 25 cc bowl, so you drain less often. The L type caps the regulated output at 0.4 MPa, so confirm your actuators never need more than that; if they might, step up to the standard S version. This model ships without the mounting bracket (J), without a gauge (N), and with a 5 um element (W) for finer filtration at the cost of more frequent element service. The NPT thread carries an MPa/psi gauge scale, and the reverse-flow (reflux) valve is fitted as an ordering difference. If the line needs oil downstream, order the matching GAFC300-15 combination instead, since this unit does not lubricate. The 1.0 MPa max supply leaves about 0.6 MPa above the 0.4 MPa top of the range, so plan your inlet pressure accordingly.
Quick checklist
This is a filter and regulator only — it delivers filtered, pressure-set air with no added oil. If a downstream tool needs lubrication, add a separate lubricator or order the GAFC300-15 combination; do not expect an oil mist from this unit.
The GAFR30015LJNWTK operates from 0.15-0.4 MPa (20-58 psi) with a maximum supply pressure of 1.0 MPa (145 psi) and a proof pressure of 1.5 MPa (215 psi). It works in temperatures from -5 to 70 C and must not freeze. The drain bowl holds 60 cc and the unit weighs 500 g.
The N code means no gauge is supplied, so you cannot read the set pressure without adding one to the 1/8in gauge connection. The J code omits the mounting bracket, which suits panel-mount installations or cases where you already have a bracket from a previous unit.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.