
The AirTAC GAFR Adjustable Filter Regulator GAFR30015LNT is a genuine two-in-one filter & regulator — a diversion-type water/particulate filter and a balanced pressure regulator built into ONE body. It has 1/2" ports, a 40 µm filter element and regulates 0.15 - 0.4 MPa (20 - 58 psi). It has no lubricator, so it adds no oil to the airflow.
The GAFR30015LNT is a filter and pressure regulator combined into a single body, saving rail space and reducing potential leak points compared to separate units. It handles a 1/2in port and delivers a lower pressure range of 0.15-0.4 MPa (20-58 psi) with a 40 um filtering element.
This model comes without a gauge, so the 1/8in gauge connection is available if you need to add one for pressure monitoring. The 60 cc condensate bowl collects water and solids separated by the internal diversion structure, and the included mounting bracket simplifies installation. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac GAFR Adjustable Filter Regulator GAFR30015LNT |
|---|---|
| Series | GAFR300 filter & regulator |
| Port size | 1/2" (NPT thread) |
| Filtering grade | 40 µm |
| Pressure range | 0.15 - 0.4 MPa (20 - 58 psi) |
| Type | Lower pressure |
| Bowl material | PC |
| Drain type | Semi-auto drain + manual drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 60 cc |
| Bracket | Included |
| Weight | 500 g |
Specifications follow the official AirTAC GAFR catalogue (pages 235-236). Air must not freeze in the unit. No gauge is supplied with this model — the gauge connection on a GAFR300 is 1/8" if you add one. This unit filters and regulates only; it does not add lubrication.
| GAFR300 | GA300 series filter & regulator — sets the port range, drain-bowl capacity and weight. |
|---|---|
| (blank) | Bowl material: PC. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 15 | Port size 1/2". This body offers 08 = 1/4", 10 = 3/8", 15 = 1/2". |
| (blank) | Drain: Semi-auto drain + manual drain. |
| L | Lower pressure type — 0.15 - 0.4 MPa (20 - 58 psi). This body offers Standard (S) or Lower pressure (L). |
| (blank) | Mounting bracket included. |
| N | No pressure gauge; 1/8" gauge connection. |
| (blank) | Filtering grade 40 µm. |
| T | NPT thread; gauge scale psi / bar. |
| (blank) | No reverse-flow valve. |
The filter and the regulator are ONE body here — there is no separate GAF filter or GAR regulator part to assemble. Need lubrication downstream too? Add a lubricator by ordering the matching GAFC300-15 F.R.L. combination instead.
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAFR300 · 1/2" · curve to 3500 L/min |
|---|---|
| One size down | GAFR200 |
| One size up | GAFR400 (curve to 7000 L/min) |
| Add a lubricator | GAFC300-15 (F.R.L. combination) |
Feed a sensitive pneumatic valve or a small precision actuator that requires a stable, low supply pressure. The balanced regulator holds the setpoint as inlet pressure fluctuates, and the 40 um filter protects the valve from particulate contamination.
Supply clean, regulated air to a laboratory fixture or test bench where a consistent low pressure is critical. The diversion filter removes liquid water and solid particles, while the lower pressure range suits delicate instruments.
Power a light assembly jig or a single holding fixture on a workbench. The compact 500 g body with a 1/2in port fits easily into a small pneumatic setup, and the included bracket allows secure mounting to a frame or panel.
Choose the GAFR300 body for medium-flow applications; its 3500 L/min flow curve at 0.7 MPa inlet is a step up from the GAFR200's 2000 L/min envelope. The PC bowl is the standard choice, while the semi-auto and manual drains give you both automatic condensate release and manual control. The L-type regulator is ideal for low-pressure circuits, but verify your system never needs more than 0.4 MPa. Since the bracket is included, you can mount it directly; the missing gauge means you'll need to add one via the 1/8in connection if you want to read outlet pressure. For lines requiring lubrication downstream, order the matching GAFC300-15 combination instead. Max supply 1.0 MPa leaves about 0.6 MPa above the 0.4 MPa top of the range.
Quick checklist
This is a filter and regulator only — it delivers filtered, pressure-set air with no added oil. If a downstream tool needs lubrication, add a separate lubricator or order the GAFC300-15 combination; do not expect an oil mist from this unit.
This filter & regulator has a 1/2in port, a lower pressure range of 0.15-0.4 MPa (20-58 psi), and a maximum pressure of 1.0 MPa (145 psi) with a proof pressure of 1.5 MPa (215 psi). It operates from -5 to 70 C, has a 60 cc drain bowl, and weighs 500 g. The unit comes with a 40 um element and a semi-auto plus manual drain.
The 'N' in the model code indicates no gauge is supplied. The GAFR300 body has a 1/8in gauge connection, so you can add a compatible AirTAC gauge if you need to read the outlet pressure. Without a gauge, you cannot visually confirm the set pressure, so plan to add one if that is required for your application.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.