verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC GAFR300 · Filter & Regulator (Filter + Pressure Regulator, One Body)

Airtac GAFR Adjustable Filter Regulator GAFR30015LNTK

The AirTAC GAFR Adjustable Filter Regulator GAFR30015LNTK is a genuine two-in-one filter & regulator — a diversion-type water/particulate filter and a balanced pressure regulator built into ONE body. It has 1/2" ports, a 40 µm filter element and regulates 0.15 - 0.4 MPa (20 - 58 psi). It has no lubricator, so it adds no oil to the airflow.

  • TypeFilter & regulator
  • Port size1/2"
  • Pressure range0.15 - 0.4 MPa (20 - 58 psi)
  • Filtering grade40 µm
  • Bowl materialPC
  • Drainsemi-auto + manual
  • Pressure gaugeNot fitted
  • Weight500 g
$46.06 $53.56Save 14% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every GAFR300-15 bowl, gauge and thread option on one page All GAFR300-15 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac GAFR Adjustable Filter Regulator GAFR30015LNTK

The GAFR30015LNTK is a filter and regulator combined into a single body, saving rail space and reducing potential leak points compared to separate units. It handles a 1/2in port and delivers a lower pressure range of 0.15-0.4 MPa (20-58 psi) with a 40 um filter element.

This model comes with a PC bowl and a semi-auto plus manual drain, giving you flexible condensate removal. It weighs 500 g and includes a mounting bracket, but no gauge is fitted; the 1/8in gauge connection is ready if you add one later. A reverse-flow valve is attached as an ordering option. This version has NPT ports (the T in the order code) for North American pipe fittings.

Airtac GAFR Adjustable Filter Regulator GAFR30015LNTK Technical Specifications

ModelAirtac GAFR Adjustable Filter Regulator GAFR30015LNTK
SeriesGAFR300 filter & regulator
Port size1/2" (NPT thread)
Filtering grade40 µm
Pressure range0.15 - 0.4 MPa (20 - 58 psi)
TypeLower pressure
Bowl materialPC
Drain typeSemi-auto drain + manual drain
FluidAir
Max. pressure1.0 MPa (145 psi)
Proof pressure1.5 MPa (215 psi)
Temperature range-5 to +70 °C (unfreeze)
Capacity of drain bowl60 cc
BracketIncluded
Weight500 g

Specifications follow the official AirTAC GAFR catalogue (pages 235-236). Air must not freeze in the unit. No gauge is supplied with this model — the gauge connection on a GAFR300 is 1/8" if you add one. This unit filters and regulates only; it does not add lubrication.

Model Code: Airtac GAFR Adjustable Filter Regulator GAFR30015LNTK

GAFR300GA300 series filter & regulator — sets the port range, drain-bowl capacity and weight.
(blank)Bowl material: PC. Available on this body: PC (blank), Metal (C), Nylon (N).
15Port size 1/2". This body offers 08 = 1/4", 10 = 3/8", 15 = 1/2".
(blank)Drain: Semi-auto drain + manual drain.
LLower pressure type — 0.15 - 0.4 MPa (20 - 58 psi). This body offers Standard (S) or Lower pressure (L).
(blank)Mounting bracket included.
NNo pressure gauge; 1/8" gauge connection.
(blank)Filtering grade 40 µm.
TNPT thread; gauge scale psi / bar.
KReverse-flow (reflux) valve attached.

The filter and the regulator are ONE body here — there is no separate GAF filter or GAR regulator part to assemble. Need lubrication downstream too? Add a lubricator by ordering the matching GAFC300-15 F.R.L. combination instead.

Size Class & Flow Envelope

  • GAFR2001/8"-1/4" · 2000 L/min
  • GAFR3001/4"-1/2" · 3500 L/min
  • GAFR4003/8"-1/2" · 7000 L/min
  • GAFR5003/4" · 8000 L/min
  • GAFR6003/4"-1" · 12000 L/min

Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.

This modelGAFR300 · 1/2" · curve to 3500 L/min
One size downGAFR200
One size upGAFR400 (curve to 7000 L/min)
Add a lubricatorGAFC300-15 (F.R.L. combination)

Where the Airtac GAFR Adjustable Filter Regulator GAFR30015LNTK Is Used

precision_manufacturing

Precision Fixture Clamping

Feed a single precision clamping fixture on an assembly bench, where the lower 0.4 MPa range protects delicate workpieces from over-pressure.

engineering

Lab Air Supply

Provide filtered, regulated air to a small lab test setup or prototype jig, where a stable low pressure is more important than high flow.

handyman

Paint Spray Booth

Supply a touch-up spray gun in a small booth, using the 40 um element to trap particles and the lower pressure range for consistent finish.

Is the Airtac GAFR Adjustable Filter Regulator GAFR30015LNTK the Right Air-Prep Unit?

Choose the GAFR300 body for 1/2in port applications needing a 60 cc condensate bowl and a 500 g footprint, a step up from the GAFR200's 25 cc bowl. The PC bowl is the standard build; the semi-auto plus manual drain suits attended lines, while the lower-pressure type caps output at 0.4 MPa (20-58 psi). The included bracket simplifies mounting, and the 40 um element handles general shop air; the no-gauge option means you must add one to read set pressure, using the 1/8in connection. This order code has NPT ports (the T in the code); the PT and G versions are separate order codes. If you need lubrication downstream, order the matching GAFC300-15 combination instead. With a 1.0 MPa max supply, you have about 0.6 MPa of headroom above this unit's 0.4 MPa regulated ceiling.

Quick checklist

  • ✓ Body size for your peak flow (1/2" here)
  • ✓ Standard 0.9 MPa or lower-pressure 0.4 MPa
  • ✓ Bowl material: PC (blank), Metal (C), Nylon (N)
  • ✓ Drain: semi-auto + manual, or automatic
  • ✓ Element 40 µm or 5 µm
  • ✓ Bracket kept or removed (J); add a lubricator = GAFC
Ask an Engineer

Installation & Maintenance Notes

  • check Install with the airflow arrow: IN to OUT, gauge/knob accessible.
  • check Keep inlet pressure at or below 1.0 MPa (145 psi).
  • check Set pressure with the pressed-in self-locking knob; pull to adjust, press to lock.
  • check Drain condensate before the 60 cc bowl fills.
  • check Keep the unit above freezing (-5 to +70 °C, unfreeze).
  • check Support the 500 g unit on its bracket, not on the tubing.

This is a filter and regulator only — it delivers filtered, pressure-set air with no added oil. If a downstream tool needs lubrication, add a separate lubricator or order the GAFC300-15 combination; do not expect an oil mist from this unit.

Airtac GAFR Adjustable Filter Regulator GAFR30015LNTK FAQ

It is a filter & regulator with a 1/2in port, a pressure range of 0.15-0.4 MPa (20-58 psi), a max pressure of 1.0 MPa (145 psi), and a proof pressure of 1.5 MPa (215 psi). The temperature range is -5 to 70 C. It has a 60 cc drain bowl and weighs 500 g.

The K code indicates that a reverse-flow (reflux) valve is fitted to the GAFR30015LNTK. It is an ordering difference from models without the K code; the catalogue does not detail its function in our data.

T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Request a Quote for Airtac GAFR Adjustable Filter Regulator GAFR30015LNTK

Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for GAFR30015LNTK and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.