
The AirTAC GAFR Adjustable Filter Regulator GAFR30015SJT is a genuine two-in-one filter & regulator — a diversion-type water/particulate filter and a balanced pressure regulator built into ONE body. It has 1/2" ports, a 40 µm filter element and regulates 0.15 - 0.9 MPa (20 - 130 psi). It has no lubricator, so it adds no oil to the airflow.
The GAFR30015SJT is a filter and regulator combined into a single body, so incoming air is cleaned by a diversion structure that spins out liquid water and solid particles before a balanced regulator sets a steady outlet pressure. This 1/2in port model weighs 500 g and works across 0.15-0.9 MPa (20-130 psi) with a 40 um element, making it a compact alternative to separate filter and regulator units.
Because the filtering and regulation stages share one body, there are fewer potential leak points and less rail space needed than with two separate components. The pressed-in self-locking knob resists set-pressure drift from vibration, and the circular gauge with magnifier shows the outlet pressure on an MPa/psi scale. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac GAFR Adjustable Filter Regulator GAFR30015SJT |
|---|---|
| Series | GAFR300 filter & regulator |
| Port size | 1/2" (NPT thread) |
| Filtering grade | 40 µm |
| Pressure range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Type | Standard |
| Bowl material | PC |
| Drain type | Semi-auto drain + manual drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 60 cc |
| Bracket | Not included (J) |
| Weight | 500 g |
Specifications follow the official AirTAC GAFR catalogue (pages 235-236). Air must not freeze in the unit. The fitted circular gauge reads in psi / bar, set by the NPT thread code. This unit filters and regulates only; it does not add lubrication.
| GAFR300 | GA300 series filter & regulator — sets the port range, drain-bowl capacity and weight. |
|---|---|
| (blank) | Bowl material: PC. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 15 | Port size 1/2". This body offers 08 = 1/4", 10 = 3/8", 15 = 1/2". |
| (blank) | Drain: Semi-auto drain + manual drain. |
| S | Standard type — 0.15 - 0.9 MPa (20 - 130 psi). This body offers Standard (S) or Lower pressure (L). |
| J | No bracket (J) — supplied without the mounting bracket. |
| (blank) | Circular pressure gauge fitted. |
| (blank) | Filtering grade 40 µm. |
| T | NPT thread; gauge scale psi / bar. |
| (blank) | No reverse-flow valve. |
The filter and the regulator are ONE body here — there is no separate GAF filter or GAR regulator part to assemble. Need lubrication downstream too? Add a lubricator by ordering the matching GAFC300-15 F.R.L. combination instead.
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAFR300 · 1/2" · curve to 3500 L/min |
|---|---|
| One size down | GAFR200 |
| One size up | GAFR400 (curve to 7000 L/min) |
| Add a lubricator | GAFC300-15 (F.R.L. combination) |
Feed a dedicated clamping fixture or a single pneumatic actuator on an assembly bench, where the 1/2in port matches common valve manifolds and the 40 um element protects the moving parts.
Supply a small CNC or manual machine's air circuit with steady regulated pressure, using the 60 cc bowl to collect condensate from a typical shop compressor line.
Power a pneumatic test rig that needs a clean, regulated air source at a set pressure, with the semi-auto drain handling routine condensate removal during long test cycles.
Choose the GAFR300 body when you need a 1/2in port and a 60 cc condensate bowl, which holds about 2.4x the volume of the GAFR200's 25 cc bowl for less frequent draining. The PC bowl is the standard build, while the semi-auto plus manual drain gives you both automatic condensate release and a manual override. This model has no mounting bracket (J code), so plan for panel mounting or an existing bracket, and the 40 um element suits general workshop air. This order code has NPT ports (the T in the code); the PT and G versions are separate order codes. If you need lubrication downstream, order the matching GAFC300-15 combination instead. With a 1.0 MPa max supply, you have about 0.1 MPa above the 0.9 MPa top of the regulated range, so keep inlet pressure near maximum when setting high outlet pressures.
Quick checklist
This is a filter and regulator only — it delivers filtered, pressure-set air with no added oil. If a downstream tool needs lubrication, add a separate lubricator or order the GAFC300-15 combination; do not expect an oil mist from this unit.
The GAFR30015SJT is a filter and regulator in one body with a 1/2in port, working range of 0.15-0.9 MPa (20-130 psi), maximum pressure of 1.0 MPa (145 psi), and proof pressure of 1.5 MPa (215 psi). It operates from -5 to 70 C, has a 60 cc drain bowl, weighs 500 g, and uses a 40 um element.
The J code in GAFR30015SJT means the mounting bracket is omitted. This suits installations where the unit is panel-mounted or secured with an existing bracket, reducing cost when the standard bracket is not needed. The unit still weighs 500 g, so it must be properly supported rather than hanging from tubing.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.