
The AirTAC GAFR Adjustable Filter Regulator GAFR300C10ASNWT is a genuine two-in-one filter & regulator — a diversion-type water/particulate filter and a balanced pressure regulator built into ONE body. It has 3/8" ports, a 5 µm filter element and regulates 0.15 - 0.9 MPa (20 - 130 psi). It has no lubricator, so it adds no oil to the airflow.
The GAFR300C10ASNWT is a filter and regulator combined into one body, so incoming air is cleaned and then set to a steady outlet pressure without needing two separate units. This 3/8in version works in the standard 0.15-0.9 MPa (20-130 psi) band and comes with a 5 um element for finer particle removal.
The metal bowl holds 60 cc of condensate and the unit weighs 500 g, placing it in the mid-size class for shop air lines. Because the filter and regulator share one body, there are fewer joints to seal compared to a separate filter plus regulator setup, which reduces potential leak points on the rail. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac GAFR Adjustable Filter Regulator GAFR300C10ASNWT |
|---|---|
| Series | GAFR300 filter & regulator |
| Port size | 3/8" (NPT thread) |
| Filtering grade | 5 µm |
| Pressure range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Type | Standard |
| Bowl material | Metal |
| Drain type | Automatic drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 60 cc |
| Bracket | Included |
| Weight | 500 g |
Specifications follow the official AirTAC GAFR catalogue (pages 235-236). Air must not freeze in the unit. No gauge is supplied with this model — the gauge connection on a GAFR300 is 1/8" if you add one. This unit filters and regulates only; it does not add lubrication.
| GAFR300 | GA300 series filter & regulator — sets the port range, drain-bowl capacity and weight. |
|---|---|
| C | Bowl material: Metal. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 10 | Port size 3/8". This body offers 08 = 1/4", 10 = 3/8", 15 = 1/2". |
| A | Drain: Automatic drain. |
| S | Standard type — 0.15 - 0.9 MPa (20 - 130 psi). This body offers Standard (S) or Lower pressure (L). |
| (blank) | Mounting bracket included. |
| N | No pressure gauge; 1/8" gauge connection. |
| W | Filtering grade 5 µm. |
| T | NPT thread; gauge scale psi / bar. |
| (blank) | No reverse-flow valve. |
The filter and the regulator are ONE body here — there is no separate GAF filter or GAR regulator part to assemble. Need lubrication downstream too? Add a lubricator by ordering the matching GAFC300-10 F.R.L. combination instead.
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAFR300 · 3/8" · curve to 3500 L/min |
|---|---|
| One size down | GAFR200 |
| One size up | GAFR400 (curve to 7000 L/min) |
| Add a lubricator | GAFC300-10 (F.R.L. combination) |
Feed a bank of precision pneumatic valves that need clean, regulated air at a steady pressure. The 5 um element keeps fine particles away from sensitive valve internals, while the automatic drain handles condensate without operator attention.
Supply a single machining station or small assembly fixture with filtered, regulated air. The 500 g body mounts securely on a panel or frame, and the 60 cc bowl provides a reasonable buffer between drain cycles in a busy shop.
Provide cleaner air to gauges or sensors that are sensitive to particulates. The 5 um element captures finer contamination than standard filters, and the balanced regulator holds the set pressure as the supply fluctuates.
Choose the GAFR300 body when you need 3/8in ports and a 60 cc drain bowl, stepping up from the GAFR200's 25 cc bowl when condensate volume is a concern. The metal bowl suits demanding environments, and the 5 um element traps finer particles than the standard 40 um, though it will need more frequent service. This model has an automatic drain for unattended operation, the mounting bracket is included, and no gauge is fitted - the 1/8in gauge connection is there if you add one later. The NPT thread matches the MPa/psi gauge scale, and there is no reverse-flow valve on this unit. If your line needs oil downstream, order the matching GAFC300-10 combination instead, since this unit does not lubricate. The 1.0 MPa max supply leaves about 0.1 MPa above the 0.9 MPa top of the range, so plan for a supply near the maximum to get the full regulated output.
Quick checklist
This is a filter and regulator only — it delivers filtered, pressure-set air with no added oil. If a downstream tool needs lubrication, add a separate lubricator or order the GAFC300-10 combination; do not expect an oil mist from this unit.
This filter & regulator has a 3/8in port, a working pressure range of 0.15-0.9 MPa (20-130 psi), a maximum pressure of 1.0 MPa (145 psi), and a proof pressure of 1.5 MPa (215 psi). It operates from -5 to 70 C and must not freeze. The metal drain bowl holds 60 cc and the unit weighs 500 g.
The N code after the port means no gauge is supplied, but the 1/8in gauge connection is there if you want to add one later. The C code specifies a metal bowl, which is a build choice for the environment - the pressure and temperature ratings are the same as PC or nylon bowls, so confirm compatibility for your specific conditions.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.