
The AirTAC GAFR Adjustable Filter Regulator GAFR300C10ASNWTK is a genuine two-in-one filter & regulator — a diversion-type water/particulate filter and a balanced pressure regulator built into ONE body. It has 3/8" ports, a 5 µm filter element and regulates 0.15 - 0.9 MPa (20 - 130 psi). It has no lubricator, so it adds no oil to the airflow.
The GAFR300C10ASNWTK is a filter and regulator combined into a single body, so it cleans incoming air and sets a steady outlet pressure without needing separate GAF and GAR units. This 3/8in version handles 0.15-0.9 MPa (20-130 psi), uses a 5 um element, and has an automatic drain that clears the 60 cc metal bowl without manual attention.
A reverse-flow (reflux) valve is fitted, and no gauge is supplied, so the 1/8in gauge connection is available if you add one later. The pressed-in self-locking knob resists drift from vibration, keeping the set pressure stable on moving equipment. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac GAFR Adjustable Filter Regulator GAFR300C10ASNWTK |
|---|---|
| Series | GAFR300 filter & regulator |
| Port size | 3/8" (NPT thread) |
| Filtering grade | 5 µm |
| Pressure range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Type | Standard |
| Bowl material | Metal |
| Drain type | Automatic drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 60 cc |
| Bracket | Included |
| Weight | 500 g |
Specifications follow the official AirTAC GAFR catalogue (pages 235-236). Air must not freeze in the unit. No gauge is supplied with this model — the gauge connection on a GAFR300 is 1/8" if you add one. This unit filters and regulates only; it does not add lubrication.
| GAFR300 | GA300 series filter & regulator — sets the port range, drain-bowl capacity and weight. |
|---|---|
| C | Bowl material: Metal. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 10 | Port size 3/8". This body offers 08 = 1/4", 10 = 3/8", 15 = 1/2". |
| A | Drain: Automatic drain. |
| S | Standard type — 0.15 - 0.9 MPa (20 - 130 psi). This body offers Standard (S) or Lower pressure (L). |
| (blank) | Mounting bracket included. |
| N | No pressure gauge; 1/8" gauge connection. |
| W | Filtering grade 5 µm. |
| T | NPT thread; gauge scale psi / bar. |
| K | Reverse-flow (reflux) valve attached. |
The filter and the regulator are ONE body here — there is no separate GAF filter or GAR regulator part to assemble. Need lubrication downstream too? Add a lubricator by ordering the matching GAFC300-10 F.R.L. combination instead.
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAFR300 · 3/8" · curve to 3500 L/min |
|---|---|
| One size down | GAFR200 |
| One size up | GAFR400 (curve to 7000 L/min) |
| Add a lubricator | GAFC300-10 (F.R.L. combination) |
Feed a bank of precision pneumatic valves that need cleaner air than standard 40 um filtration provides, with the 5 um element protecting sensitive internal clearances.
Mount on a machine station where operators cannot always drain the bowl manually, relying on the automatic drain to expel condensate during long production runs.
Use on tooling that experiences constant vibration, where the self-locking knob holds the pressure setting and the metal bowl resists impacts from nearby moving parts.
Choose this GAFR300 when you need a 3/8in port with a 500 g body, a step up from the GAFR200's 25 cc bowl and a step down from the GAFR400's 100 cc bowl. The metal bowl suits demanding environments, while the automatic drain is ideal for unattended lines; the included bracket simplifies mounting, and the 5 um element traps finer particles than the standard 40 um grade. If your line needs oil downstream, order the matching GAFC300-10 combination instead, since this unit does not lubricate. With a 1.0 MPa max supply, you get about 0.1 MPa of headroom above the 0.9 MPa top of the regulated range.
Quick checklist
This is a filter and regulator only — it delivers filtered, pressure-set air with no added oil. If a downstream tool needs lubrication, add a separate lubricator or order the GAFC300-10 combination; do not expect an oil mist from this unit.
Working pressure is 0.15-0.9 MPa (20-130 psi), max pressure is 1.0 MPa (145 psi), proof pressure is 1.5 MPa (215 psi), and temperature range is -5 to 70 C. The drain bowl holds 60 cc, the unit weighs 500 g, and the port is 3/8in.
The N code means no gauge is supplied, which suits installations where a panel-mounted gauge already exists. If you add one later, the gauge connection on GAFR300 is 1/8in.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.