
The AirTAC GAFR Adjustable Filter Regulator GAFR300C10ASTK is a genuine two-in-one filter & regulator — a diversion-type water/particulate filter and a balanced pressure regulator built into ONE body. It has 3/8" ports, a 40 µm filter element and regulates 0.15 - 0.9 MPa (20 - 130 psi). It has no lubricator, so it adds no oil to the airflow.
The GAFR300C10ASTK is a genuine AirTAC filter & regulator, combining both functions in a single body. It spins incoming air to separate liquid water and trap solid particles, then a balanced regulator holds the outlet steady as supply pressure varies. This 3/8in unit works across 0.15-0.9 MPa (20-130 psi) and comes with a 40 um element.
This model features a metal bowl and an automatic drain, so it suits lines where regular manual draining is impractical. The pressed-in self-locking knob resists drift from vibration, keeping the set pressure stable. At 500 g, it needs a proper panel or frame mount rather than support from the tubing. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac GAFR Adjustable Filter Regulator GAFR300C10ASTK |
|---|---|
| Series | GAFR300 filter & regulator |
| Port size | 3/8" (NPT thread) |
| Filtering grade | 40 µm |
| Pressure range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Type | Standard |
| Bowl material | Metal |
| Drain type | Automatic drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 60 cc |
| Bracket | Included |
| Weight | 500 g |
Specifications follow the official AirTAC GAFR catalogue (pages 235-236). Air must not freeze in the unit. The fitted circular gauge reads in psi / bar, set by the NPT thread code. This unit filters and regulates only; it does not add lubrication.
| GAFR300 | GA300 series filter & regulator — sets the port range, drain-bowl capacity and weight. |
|---|---|
| C | Bowl material: Metal. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 10 | Port size 3/8". This body offers 08 = 1/4", 10 = 3/8", 15 = 1/2". |
| A | Drain: Automatic drain. |
| S | Standard type — 0.15 - 0.9 MPa (20 - 130 psi). This body offers Standard (S) or Lower pressure (L). |
| (blank) | Mounting bracket included. |
| (blank) | Circular pressure gauge fitted. |
| (blank) | Filtering grade 40 µm. |
| T | NPT thread; gauge scale psi / bar. |
| K | Reverse-flow (reflux) valve attached. |
The filter and the regulator are ONE body here — there is no separate GAF filter or GAR regulator part to assemble. Need lubrication downstream too? Add a lubricator by ordering the matching GAFC300-10 F.R.L. combination instead.
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAFR300 · 3/8" · curve to 3500 L/min |
|---|---|
| One size down | GAFR200 |
| One size up | GAFR400 (curve to 7000 L/min) |
| Add a lubricator | GAFC300-10 (F.R.L. combination) |
Feed a 3/8in line to a CNC machine's coolant system, where clean, regulated air keeps actuators consistent and the automatic drain reduces maintenance stops.
Supply a multi-operator assembly bench with stable 0.15-0.9 MPa air, filtering water and solids from a shared compressor before it reaches hand tools.
Use on a pneumatic test fixture where the 40 um element protects sensitive valves and the metal bowl handles frequent pressure cycling without cracking.
Choose this GAFR300C10ASTK for a 3/8in line that needs both filtration and pressure control in one compact body. The metal bowl suits demanding environments, while the automatic drain handles condensate without operator attention. The included bracket simplifies mounting, and the fitted gauge shows MPa/psi. If you need finer filtration, select the W option for a 5 um element; if oil is required downstream, order the matching GAFC300-10 combination instead. The reverse-flow valve is fitted as an ordering difference. Note that 1.0 MPa max supply leaves about 0.1 MPa above the 0.9 MPa top of the range.
Quick checklist
This is a filter and regulator only — it delivers filtered, pressure-set air with no added oil. If a downstream tool needs lubrication, add a separate lubricator or order the GAFC300-10 combination; do not expect an oil mist from this unit.
Working pressure is 0.15-0.9 MPa (20-130 psi), with a maximum of 1.0 MPa (145 psi) and proof pressure of 1.5 MPa (215 psi). Temperature range is -5 to 70 C. The drain bowl holds 60 cc and the unit weighs 500 g. It has a 3/8in port, 40 um element, and automatic drain.
The K indicates a reverse-flow (reflux) valve is fitted. This is an ordering difference from models without it. The catalogue does not specify its function in our data, so confirm the operational details from the full AirTAC datasheet if needed.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.