
The AirTAC GAFR Adjustable Filter Regulator GAFR300C10ASWT is a genuine two-in-one filter & regulator — a diversion-type water/particulate filter and a balanced pressure regulator built into ONE body. It has 3/8" ports, a 5 µm filter element and regulates 0.15 - 0.9 MPa (20 - 130 psi). It has no lubricator, so it adds no oil to the airflow.
The GAFR300C10ASWT is a filter and pressure regulator combined in a single body, so incoming air is first spun to separate liquid water and solid particles, then regulated to a steady outlet pressure. This 3/8in unit carries a 5 um element for finer filtration and works across 0.15-0.9 MPa (20-130 psi), with a metal bowl and an automatic drain.
Because the filter and regulator share one housing, this part replaces what would otherwise be two separate components, reducing potential leak points and saving space on the rail. The balanced regulator mechanism holds the set pressure steady as supply pressure varies, while the pressed-in self-locking knob resists drift from vibration. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac GAFR Adjustable Filter Regulator GAFR300C10ASWT |
|---|---|
| Series | GAFR300 filter & regulator |
| Port size | 3/8" (NPT thread) |
| Filtering grade | 5 µm |
| Pressure range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Type | Standard |
| Bowl material | Metal |
| Drain type | Automatic drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 60 cc |
| Bracket | Included |
| Weight | 500 g |
Specifications follow the official AirTAC GAFR catalogue (pages 235-236). Air must not freeze in the unit. The fitted circular gauge reads in psi / bar, set by the NPT thread code. This unit filters and regulates only; it does not add lubrication.
| GAFR300 | GA300 series filter & regulator — sets the port range, drain-bowl capacity and weight. |
|---|---|
| C | Bowl material: Metal. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 10 | Port size 3/8". This body offers 08 = 1/4", 10 = 3/8", 15 = 1/2". |
| A | Drain: Automatic drain. |
| S | Standard type — 0.15 - 0.9 MPa (20 - 130 psi). This body offers Standard (S) or Lower pressure (L). |
| (blank) | Mounting bracket included. |
| (blank) | Circular pressure gauge fitted. |
| W | Filtering grade 5 µm. |
| T | NPT thread; gauge scale psi / bar. |
| (blank) | No reverse-flow valve. |
The filter and the regulator are ONE body here — there is no separate GAF filter or GAR regulator part to assemble. Need lubrication downstream too? Add a lubricator by ordering the matching GAFC300-10 F.R.L. combination instead.
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAFR300 · 3/8" · curve to 3500 L/min |
|---|---|
| One size down | GAFR200 |
| One size up | GAFR400 (curve to 7000 L/min) |
| Add a lubricator | GAFC300-10 (F.R.L. combination) |
Feed a bank of pneumatic valves on a small assembly station where the 5 um element protects fine internal passages from particle wear.
Condition air for a single CNC machine's clamping circuit, where the automatic drain removes condensate without stopping production.
Supply a test bench or calibration rig with filtered, regulated air at a stable pressure, relying on the balanced regulator to hold the setpoint.
Choose the GAFR300 body when you need 3/8in porting with a 60 cc condensate bowl and a flow curve plotted to 3500 L/min at 0.7 MPa inlet; step up to the GAFR400 for a 100 cc bowl and a 7000 L/min envelope if the line is larger. The metal bowl here suits demanding environments, while the automatic drain handles unattended operation or wet lines without manual intervention. The 5 um element traps finer particles than the standard 40 um, making it a fit for precision valves or instrument air, though it will need more frequent service. A mounting bracket is included, and the NPT thread brings an MPa/psi gauge scale. If the downstream line also needs lubrication, order the matching GAFC300-10 combination instead, as this unit does not add oil. With a 1.0 MPa max supply, you have about 0.1 MPa above the 0.9 MPa top of the regulated range, so plan the inlet pressure near the maximum to reach the highest setpoint.
Quick checklist
This is a filter and regulator only — it delivers filtered, pressure-set air with no added oil. If a downstream tool needs lubrication, add a separate lubricator or order the GAFC300-10 combination; do not expect an oil mist from this unit.
This filter & regulator has a 3/8in port, a working pressure range of 0.15-0.9 MPa (20-130 psi), a maximum pressure of 1.0 MPa (145 psi), and a proof pressure of 1.5 MPa (215 psi). It operates from -5 to 70 C and must not freeze. The metal condensate bowl holds 60 cc, and the unit weighs 500 g. It comes with a 5 um element, an automatic drain, a mounting bracket, and a fitted gauge with an MPa/psi scale.
The metal bowl (C code) is a build choice for the condensate chamber, while the 5 um element (W code) provides finer filtration than the standard 40 um grade. The finer element traps smaller particles, which is beneficial for precision valves or instrument air, but it will require more frequent servicing than a 40 um element. The automatic drain (A code) removes condensate without manual attention.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.