
The AirTAC GAFR Adjustable Filter Regulator GAFR300C10LJT is a genuine two-in-one filter & regulator — a diversion-type water/particulate filter and a balanced pressure regulator built into ONE body. It has 3/8" ports, a 40 µm filter element and regulates 0.15 - 0.4 MPa (20 - 58 psi). It has no lubricator, so it adds no oil to the airflow.
The GAFR300C10LJT is a filter and regulator combined in a single body, so it cleans incoming air and sets a steady outlet pressure without needing separate components. This lower-pressure model works in the 0.15-0.4 MPa (20-58 psi) band and uses a 40 um element to trap particles.
The metal bowl holds 60 cc of condensate, and the unit weighs 500 g. A circular gauge with MPa/psi scale is fitted, and the pressed-in self-locking knob helps maintain the set pressure against vibration. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac GAFR Adjustable Filter Regulator GAFR300C10LJT |
|---|---|
| Series | GAFR300 filter & regulator |
| Port size | 3/8" (NPT thread) |
| Filtering grade | 40 µm |
| Pressure range | 0.15 - 0.4 MPa (20 - 58 psi) |
| Type | Lower pressure |
| Bowl material | Metal |
| Drain type | Semi-auto drain + manual drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 60 cc |
| Bracket | Not included (J) |
| Weight | 500 g |
Specifications follow the official AirTAC GAFR catalogue (pages 235-236). Air must not freeze in the unit. The fitted circular gauge reads in psi / bar, set by the NPT thread code. This unit filters and regulates only; it does not add lubrication.
| GAFR300 | GA300 series filter & regulator — sets the port range, drain-bowl capacity and weight. |
|---|---|
| C | Bowl material: Metal. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 10 | Port size 3/8". This body offers 08 = 1/4", 10 = 3/8", 15 = 1/2". |
| (blank) | Drain: Semi-auto drain + manual drain. |
| L | Lower pressure type — 0.15 - 0.4 MPa (20 - 58 psi). This body offers Standard (S) or Lower pressure (L). |
| J | No bracket (J) — supplied without the mounting bracket. |
| (blank) | Circular pressure gauge fitted. |
| (blank) | Filtering grade 40 µm. |
| T | NPT thread; gauge scale psi / bar. |
| (blank) | No reverse-flow valve. |
The filter and the regulator are ONE body here — there is no separate GAF filter or GAR regulator part to assemble. Need lubrication downstream too? Add a lubricator by ordering the matching GAFC300-10 F.R.L. combination instead.
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAFR300 · 3/8" · curve to 3500 L/min |
|---|---|
| One size down | GAFR200 |
| One size up | GAFR400 (curve to 7000 L/min) |
| Add a lubricator | GAFC300-10 (F.R.L. combination) |
Use the lower 0.15-0.4 MPa range for delicate pneumatic circuits that need a gentle, stable supply. The balanced regulator holds the outlet steady as inlet pressure varies, protecting sensitive actuators.
With no bracket (J), this unit mounts directly into a panel or existing frame. The single-body design saves rail width compared to separate filter and regulator parts, fitting tight control cabinets.
The metal bowl collects 60 cc of water and solids from the diverted airflow. Both semi-auto and manual drains are fitted, so operators can choose between automatic purge during operation or manual dumping.
Choose this GAFR300 if you need a 3/8in port with a 60 cc drain bowl and a flow envelope plotted to 3500 L/min at 0.7 MPa inlet. The L type tops out at 0.4 MPa, so confirm your line never needs more than that; if it might, select the standard S version instead. The metal bowl suits demanding environments, and the J code means no mounting bracket is included - plan for panel mounting or an existing bracket.
The semi-auto and manual drains are both fitted, giving you flexibility for scheduled or automatic condensate release. This order code has NPT ports (the T in the code); the PT and G versions are separate order codes. If your line needs lubrication downstream, order the matching GAFC300-10 combination rather than expecting this unit to add oil. With a 1.0 MPa max supply, you have about 0.6 MPa of headroom above the 0.4 MPa top of the regulated range.
Quick checklist
This is a filter and regulator only — it delivers filtered, pressure-set air with no added oil. If a downstream tool needs lubrication, add a separate lubricator or order the GAFC300-10 combination; do not expect an oil mist from this unit.
Working pressure range is 0.15-0.4 MPa (20-58 psi). Maximum pressure is 1.0 MPa (145 psi) and proof pressure is 1.5 MPa (215 psi). Temperature range is -5 to 70 C and must not freeze. The drain bowl holds 60 cc and the unit weighs 500 g. It has a 3/8in port and a 40 um filter element.
The J code omits the standard bracket, which is useful when you have an existing panel mount or a custom frame. This reduces parts and lets you integrate the unit directly into your machine structure. The 500 g weight still needs proper support from a panel or frame, not from the tubing.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.