
The AirTAC GAFR Adjustable Filter Regulator GAFR300C10LJTK is a genuine two-in-one filter & regulator — a diversion-type water/particulate filter and a balanced pressure regulator built into ONE body. It has 3/8" ports, a 40 µm filter element and regulates 0.15 - 0.4 MPa (20 - 58 psi). It has no lubricator, so it adds no oil to the airflow.
This GAFR300C10LJTK is a filter & regulator combined into a single body, so the incoming air is cleaned and then set to a steady outlet pressure without a separate filter and regulator train. It has a metal condensate bowl, a 3/8in port, and a lower-pressure type rated for 0.15-0.4 MPa (20-58 psi) with a 40 um element.
The diversion structure spins the air to separate liquid water and solid particles into the 60 cc drain bowl, while the balanced, self-locking regulator holds the set pressure as supply varies. This unit does not lubricate; if oil is needed downstream, the matching GAFC300-10 combination adds a lubricator. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac GAFR Adjustable Filter Regulator GAFR300C10LJTK |
|---|---|
| Series | GAFR300 filter & regulator |
| Port size | 3/8" (NPT thread) |
| Filtering grade | 40 µm |
| Pressure range | 0.15 - 0.4 MPa (20 - 58 psi) |
| Type | Lower pressure |
| Bowl material | Metal |
| Drain type | Semi-auto drain + manual drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 60 cc |
| Bracket | Not included (J) |
| Weight | 500 g |
Specifications follow the official AirTAC GAFR catalogue (pages 235-236). Air must not freeze in the unit. The fitted circular gauge reads in psi / bar, set by the NPT thread code. This unit filters and regulates only; it does not add lubrication.
| GAFR300 | GA300 series filter & regulator — sets the port range, drain-bowl capacity and weight. |
|---|---|
| C | Bowl material: Metal. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 10 | Port size 3/8". This body offers 08 = 1/4", 10 = 3/8", 15 = 1/2". |
| (blank) | Drain: Semi-auto drain + manual drain. |
| L | Lower pressure type — 0.15 - 0.4 MPa (20 - 58 psi). This body offers Standard (S) or Lower pressure (L). |
| J | No bracket (J) — supplied without the mounting bracket. |
| (blank) | Circular pressure gauge fitted. |
| (blank) | Filtering grade 40 µm. |
| T | NPT thread; gauge scale psi / bar. |
| K | Reverse-flow (reflux) valve attached. |
The filter and the regulator are ONE body here — there is no separate GAF filter or GAR regulator part to assemble. Need lubrication downstream too? Add a lubricator by ordering the matching GAFC300-10 F.R.L. combination instead.
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAFR300 · 3/8" · curve to 3500 L/min |
|---|---|
| One size down | GAFR200 |
| One size up | GAFR400 (curve to 7000 L/min) |
| Add a lubricator | GAFC300-10 (F.R.L. combination) |
Use this lower-pressure unit to set a steady 0.15-0.4 MPa supply for a precision pneumatic valve or a sensitive instrument loop, where the balanced regulator keeps the outlet stable.
The 500 g body with a 3/8in port fits a small machine frame or a panel where a separate filter and regulator would take up too much rail width.
Feed a single actuator or a small jig with cleaned air, using the metal bowl to collect condensate and the manual drain to empty it during routine checks.
Choose the GAFR300 body when you need a 3/8in port and a 500 g unit that fits a compact panel; the flow envelope is plotted to 3500 L/min at 0.7 MPa inlet. The metal bowl (C) is a build choice, and the semi-auto plus manual drain requires someone to check the 60 cc bowl periodically. The L type tops out at 0.4 MPa, so confirm the machine never needs more than that; the J code means no bracket is included, and the K code adds the reverse-flow valve as an ordering difference. The gauge is fitted with an MPa/psi scale, and the 40 um element is the standard grade. With a 1.0 MPa max supply, 1.0 MPa max supply leaves about 0.6 MPa above the 0.4 MPa top of the range.
Quick checklist
This is a filter and regulator only — it delivers filtered, pressure-set air with no added oil. If a downstream tool needs lubrication, add a separate lubricator or order the GAFC300-10 combination; do not expect an oil mist from this unit.
The GAFR300C10LJTK is a filter & regulator with a 3/8in port, a 60 cc drain bowl, and a weight of 500 g. The pressure range is 0.15-0.4 MPa (20-58 psi), with a max pressure of 1.0 MPa (145 psi) and a proof pressure of 1.5 MPa (215 psi). The temperature range is -5 to 70 C, and the element is 40 um.
The K code means a reverse-flow (reflux) valve is fitted to this GAFR300C10LJTK. It is an ordering difference only; the catalogue defers the function of this valve to a separate page, so we do not explain its operation here.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.