
The AirTAC GAFR Adjustable Filter Regulator GAFR300C10LJWT is a genuine two-in-one filter & regulator — a diversion-type water/particulate filter and a balanced pressure regulator built into ONE body. It has 3/8" ports, a 5 µm filter element and regulates 0.15 - 0.4 MPa (20 - 58 psi). It has no lubricator, so it adds no oil to the airflow.
The GAFR300C10LJWT is a filter & regulator in a single body, combining a diversion filter and a balanced pressure regulator without any lubricator. This 3/8in model operates in the lower 0.15-0.4 MPa (20-58 psi) range and uses a 5 um element to trap fine particles.
The metal bowl holds 60 cc of condensate, and the unit weighs 500 g. Its circular gauge with MPa/psi scale is fitted, while the semi-auto and manual drains handle condensate removal. The pressed-in self-locking knob resists set-pressure drift from vibration. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac GAFR Adjustable Filter Regulator GAFR300C10LJWT |
|---|---|
| Series | GAFR300 filter & regulator |
| Port size | 3/8" (NPT thread) |
| Filtering grade | 5 µm |
| Pressure range | 0.15 - 0.4 MPa (20 - 58 psi) |
| Type | Lower pressure |
| Bowl material | Metal |
| Drain type | Semi-auto drain + manual drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 60 cc |
| Bracket | Not included (J) |
| Weight | 500 g |
Specifications follow the official AirTAC GAFR catalogue (pages 235-236). Air must not freeze in the unit. The fitted circular gauge reads in psi / bar, set by the NPT thread code. This unit filters and regulates only; it does not add lubrication.
| GAFR300 | GA300 series filter & regulator — sets the port range, drain-bowl capacity and weight. |
|---|---|
| C | Bowl material: Metal. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 10 | Port size 3/8". This body offers 08 = 1/4", 10 = 3/8", 15 = 1/2". |
| (blank) | Drain: Semi-auto drain + manual drain. |
| L | Lower pressure type — 0.15 - 0.4 MPa (20 - 58 psi). This body offers Standard (S) or Lower pressure (L). |
| J | No bracket (J) — supplied without the mounting bracket. |
| (blank) | Circular pressure gauge fitted. |
| W | Filtering grade 5 µm. |
| T | NPT thread; gauge scale psi / bar. |
| (blank) | No reverse-flow valve. |
The filter and the regulator are ONE body here — there is no separate GAF filter or GAR regulator part to assemble. Need lubrication downstream too? Add a lubricator by ordering the matching GAFC300-10 F.R.L. combination instead.
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAFR300 · 3/8" · curve to 3500 L/min |
|---|---|
| One size down | GAFR200 |
| One size up | GAFR400 (curve to 7000 L/min) |
| Add a lubricator | GAFC300-10 (F.R.L. combination) |
Feed a precision pneumatic valve with the 5 um element filtering fine particles that could clog orifices, while the lower pressure range protects sensitive components from overpressure.
Use on a laboratory test bench where a regulated 0.15-0.4 MPa supply is needed for calibration fixtures, with the metal bowl resisting accidental impacts from tools.
Supply a single-station assembly jig with clean, regulated air at lower pressure, where the 60 cc bowl handles condensate from a moderately wet compressor line.
Choose the GAFR300 body for 3/8in ports with a 60 cc drain bowl and 500 g mass, stepping up from the GAFR200's 25 cc bowl if you need longer between drain interventions. The metal bowl suits demanding environments, while the 5 um element filters finer particles than the standard 40 um grade, though it requires more frequent service. This model has no mounting bracket (J code), so plan for panel mounting or an existing bracket, and the semi-auto plus manual drains require periodic attention. The L-type regulator tops out at 0.4 MPa, so confirm your system never needs more than that. If lubrication is needed downstream, order the matching GAFC300-10 combination instead. The 1.0 MPa max supply leaves about 0.6 MPa above the 0.4 MPa top of the range, giving ample inlet margin for stable regulation.
Quick checklist
This is a filter and regulator only — it delivers filtered, pressure-set air with no added oil. If a downstream tool needs lubrication, add a separate lubricator or order the GAFC300-10 combination; do not expect an oil mist from this unit.
This filter & regulator has a 3/8in port, 0.15-0.4 MPa (20-58 psi) working range, 1.0 MPa (145 psi) max pressure, 1.5 MPa (215 psi) proof pressure, and operates from -5 to 70 C. The metal bowl holds 60 cc of condensate and the unit weighs 500 g, with a 5 um element and semi-auto plus manual drains.
The L code sets the lower 0.15-0.4 MPa range, suitable for applications that never need more than 0.4 MPa. The J code omits the mounting bracket, so you must use an existing bracket or panel mount. This model includes the circular gauge with MPa/psi scale and the 5 um element for finer filtration.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.