
The AirTAC GAFR Adjustable Filter Regulator GAFR300C10LJWTK is a genuine two-in-one filter & regulator — a diversion-type water/particulate filter and a balanced pressure regulator built into ONE body. It has 3/8" ports, a 5 µm filter element and regulates 0.15 - 0.4 MPa (20 - 58 psi). It has no lubricator, so it adds no oil to the airflow.
The GAFR300C10LJWTK is a filter and pressure regulator combined into a single body, saving rail space and reducing potential leak points compared to separate units. It handles 3/8in ports, regulates from 0.15 to 0.4 MPa (20-58 psi), and uses a 5 um element to trap fine particles.
This metal-bowl version includes a circular gauge with MPa/psi scale, a semi-auto plus manual drain, and a reverse-flow valve. The pressed-in self-locking knob resists vibration drift, keeping the lower-pressure setting stable in demanding environments. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac GAFR Adjustable Filter Regulator GAFR300C10LJWTK |
|---|---|
| Series | GAFR300 filter & regulator |
| Port size | 3/8" (NPT thread) |
| Filtering grade | 5 µm |
| Pressure range | 0.15 - 0.4 MPa (20 - 58 psi) |
| Type | Lower pressure |
| Bowl material | Metal |
| Drain type | Semi-auto drain + manual drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 60 cc |
| Bracket | Not included (J) |
| Weight | 500 g |
Specifications follow the official AirTAC GAFR catalogue (pages 235-236). Air must not freeze in the unit. The fitted circular gauge reads in psi / bar, set by the NPT thread code. This unit filters and regulates only; it does not add lubrication.
| GAFR300 | GA300 series filter & regulator — sets the port range, drain-bowl capacity and weight. |
|---|---|
| C | Bowl material: Metal. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 10 | Port size 3/8". This body offers 08 = 1/4", 10 = 3/8", 15 = 1/2". |
| (blank) | Drain: Semi-auto drain + manual drain. |
| L | Lower pressure type — 0.15 - 0.4 MPa (20 - 58 psi). This body offers Standard (S) or Lower pressure (L). |
| J | No bracket (J) — supplied without the mounting bracket. |
| (blank) | Circular pressure gauge fitted. |
| W | Filtering grade 5 µm. |
| T | NPT thread; gauge scale psi / bar. |
| K | Reverse-flow (reflux) valve attached. |
The filter and the regulator are ONE body here — there is no separate GAF filter or GAR regulator part to assemble. Need lubrication downstream too? Add a lubricator by ordering the matching GAFC300-10 F.R.L. combination instead.
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAFR300 · 3/8" · curve to 3500 L/min |
|---|---|
| One size down | GAFR200 |
| One size up | GAFR400 (curve to 7000 L/min) |
| Add a lubricator | GAFC300-10 (F.R.L. combination) |
Feed a bank of precision pneumatic valves on a small assembly machine. The 5 um element protects fine internal passages, while the lower pressure range suits delicate actuation tasks.
Provide clean, regulated air to a laboratory test fixture that requires a stable but low supply pressure. The metal bowl resists damage in a busy workshop environment.
Supply a single pneumatic actuator on a packaging line where space is tight. The combined filter-regulator body reduces footprint, and the manual drain allows quick maintenance.
Choose this GAFR300 when your circuit needs a compact filter-regulator with a 3/8in port and a lower 0.4 MPa ceiling. The metal bowl suits industrial settings, while the 5 um element provides finer filtration for sensitive valves. It ships without a bracket, so plan for panel mounting or an existing support. The semi-auto and manual drains give you both automatic condensate release and manual override. For lines requiring oil downstream, order the GAFC300-10 combination instead. Note that 1.0 MPa max supply leaves about 0.6 MPa above the 0.4 MPa top of the range, so ensure your inlet pressure stays near that maximum to reach the setpoint.
Quick checklist
This is a filter and regulator only — it delivers filtered, pressure-set air with no added oil. If a downstream tool needs lubrication, add a separate lubricator or order the GAFC300-10 combination; do not expect an oil mist from this unit.
This filter-regulator has a 3/8in port, a lower pressure range of 0.15-0.4 MPa (20-58 psi), a maximum pressure of 1.0 MPa (145 psi), and a proof pressure of 1.5 MPa (215 psi). It operates from -5 to 70 C, has a 60 cc drain bowl, and weighs 500 g. The unit includes a 5 um element and a semi-auto plus manual drain.
The 'K' code indicates a reverse-flow (reflux) valve is fitted, which is an ordering difference for specific circuit needs. The 'J' code means the mounting bracket is omitted, so you must use an existing bracket or panel mount. This configuration is chosen when the installation already has support or when the reverse-flow function is required.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.