
The AirTAC GAFR Adjustable Filter Regulator GAFR300C10LT is a genuine two-in-one filter & regulator — a diversion-type water/particulate filter and a balanced pressure regulator built into ONE body. It has 3/8" ports, a 40 µm filter element and regulates 0.15 - 0.4 MPa (20 - 58 psi). It has no lubricator, so it adds no oil to the airflow.
The GAFR300C10LT is a filter & regulator that combines both functions in a single body, saving rail space and reducing potential leak points. It handles a 3/8in port and delivers a lower pressure range of 0.15-0.4 MPa (20-58 psi) with a 40 um element.
The metal bowl (60 cc) collects condensate and solids separated by the diversion structure, which spins the air to drop out liquid water and particles. This 500 g unit includes a circular gauge with MPa/psi scale and a mounting bracket, making it ready for panel or frame installation. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac GAFR Adjustable Filter Regulator GAFR300C10LT |
|---|---|
| Series | GAFR300 filter & regulator |
| Port size | 3/8" (NPT thread) |
| Filtering grade | 40 µm |
| Pressure range | 0.15 - 0.4 MPa (20 - 58 psi) |
| Type | Lower pressure |
| Bowl material | Metal |
| Drain type | Semi-auto drain + manual drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 60 cc |
| Bracket | Included |
| Weight | 500 g |
Specifications follow the official AirTAC GAFR catalogue (pages 235-236). Air must not freeze in the unit. The fitted circular gauge reads in psi / bar, set by the NPT thread code. This unit filters and regulates only; it does not add lubrication.
| GAFR300 | GA300 series filter & regulator — sets the port range, drain-bowl capacity and weight. |
|---|---|
| C | Bowl material: Metal. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 10 | Port size 3/8". This body offers 08 = 1/4", 10 = 3/8", 15 = 1/2". |
| (blank) | Drain: Semi-auto drain + manual drain. |
| L | Lower pressure type — 0.15 - 0.4 MPa (20 - 58 psi). This body offers Standard (S) or Lower pressure (L). |
| (blank) | Mounting bracket included. |
| (blank) | Circular pressure gauge fitted. |
| (blank) | Filtering grade 40 µm. |
| T | NPT thread; gauge scale psi / bar. |
| (blank) | No reverse-flow valve. |
The filter and the regulator are ONE body here — there is no separate GAF filter or GAR regulator part to assemble. Need lubrication downstream too? Add a lubricator by ordering the matching GAFC300-10 F.R.L. combination instead.
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAFR300 · 3/8" · curve to 3500 L/min |
|---|---|
| One size down | GAFR200 |
| One size up | GAFR400 (curve to 7000 L/min) |
| Add a lubricator | GAFC300-10 (F.R.L. combination) |
Use the lower 0.15-0.4 MPa range to set a stable, low pressure for delicate pneumatic controls or sensitive actuators that must not see higher forces.
The 500 g body with 3/8in port fits tight machine frames where a separate filter and regulator would not. The included bracket secures it to a panel or frame.
The 60 cc metal bowl collects water and solids from the air stream. The semi-auto drain releases condensate automatically while the manual drain allows on-demand purging.
Choose the GAFR300C10LT when you need a 3/8in port with a lower pressure range of 0.15-0.4 MPa (20-58 psi) for sensitive applications. The metal bowl suits demanding environments, while the semi-auto+manual drain gives you both automatic condensate release and manual override. The included bracket simplifies mounting, and the fitted gauge shows MPa/psi. If you need finer filtration, select the W option for a 5 um element. For lines requiring lubrication downstream, order the matching GAFC300-10 combination instead. Note that 1.0 MPa max supply leaves about 0.6 MPa above the 0.4 MPa top of the range.
Quick checklist
This is a filter and regulator only — it delivers filtered, pressure-set air with no added oil. If a downstream tool needs lubrication, add a separate lubricator or order the GAFC300-10 combination; do not expect an oil mist from this unit.
The GAFR300C10LT is a filter & regulator with a 3/8in port, 0.15-0.4 MPa (20-58 psi) pressure range, 1.0 MPa (145 psi) max pressure, 1.5 MPa (215 psi) proof pressure, -5 to 70 C temperature range, 60 cc drain bowl, and 500 g weight. It has a 40 um element, metal bowl, semi-auto+manual drain, and a fitted gauge.
The L type is designed for applications that require a lower regulated pressure, topping out at 0.4 MPa instead of the standard 0.9 MPa. This allows finer adjustment within the 0.15-0.4 MPa band, which is useful for sensitive equipment that must not see higher pressures.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.