
The AirTAC GAFR Adjustable Filter Regulator GAFR300C10LWT is a genuine two-in-one filter & regulator — a diversion-type water/particulate filter and a balanced pressure regulator built into ONE body. It has 3/8" ports, a 5 µm filter element and regulates 0.15 - 0.4 MPa (20 - 58 psi). It has no lubricator, so it adds no oil to the airflow.
The GAFR300C10LWT is a filter and regulator combined in a single body, so it cleans incoming air and stabilizes outlet pressure without needing separate components. This model uses a 3/8in port, a lower-pressure range of 0.15-0.4 MPa (20-58 psi), and a 5 um element for fine filtration.
The metal bowl holds 60 cc of condensate, and the unit weighs 500 g. A circular gauge with MPa/psi scale is fitted, and the mounting bracket is included. The diversion structure spins air to separate liquid water and solid particles into the bowl, while the balanced regulator holds the set pressure steady as supply varies. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac GAFR Adjustable Filter Regulator GAFR300C10LWT |
|---|---|
| Series | GAFR300 filter & regulator |
| Port size | 3/8" (NPT thread) |
| Filtering grade | 5 µm |
| Pressure range | 0.15 - 0.4 MPa (20 - 58 psi) |
| Type | Lower pressure |
| Bowl material | Metal |
| Drain type | Semi-auto drain + manual drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 60 cc |
| Bracket | Included |
| Weight | 500 g |
Specifications follow the official AirTAC GAFR catalogue (pages 235-236). Air must not freeze in the unit. The fitted circular gauge reads in psi / bar, set by the NPT thread code. This unit filters and regulates only; it does not add lubrication.
| GAFR300 | GA300 series filter & regulator — sets the port range, drain-bowl capacity and weight. |
|---|---|
| C | Bowl material: Metal. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 10 | Port size 3/8". This body offers 08 = 1/4", 10 = 3/8", 15 = 1/2". |
| (blank) | Drain: Semi-auto drain + manual drain. |
| L | Lower pressure type — 0.15 - 0.4 MPa (20 - 58 psi). This body offers Standard (S) or Lower pressure (L). |
| (blank) | Mounting bracket included. |
| (blank) | Circular pressure gauge fitted. |
| W | Filtering grade 5 µm. |
| T | NPT thread; gauge scale psi / bar. |
| (blank) | No reverse-flow valve. |
The filter and the regulator are ONE body here — there is no separate GAF filter or GAR regulator part to assemble. Need lubrication downstream too? Add a lubricator by ordering the matching GAFC300-10 F.R.L. combination instead.
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAFR300 · 3/8" · curve to 3500 L/min |
|---|---|
| One size down | GAFR200 |
| One size up | GAFR400 (curve to 7000 L/min) |
| Add a lubricator | GAFC300-10 (F.R.L. combination) |
Use the 5 um element to protect sensitive pneumatic valves and instruments from fine particles that could affect their operation.
The 0.15-0.4 MPa range is ideal for applications requiring gentle, consistent pressure, such as light clamping or air bearing circuits.
The integrated filter-regulator body saves rail space and reduces potential leak points compared to separate units, fitting neatly into compact machine frames.
Choose the GAFR300C10LWT when your circuit needs fine 5 um filtration and a lower regulated band of 0.15-0.4 MPa (20-58 psi). The metal bowl suits demanding environments, while the semi-auto and manual drains give you both automatic purging and manual override. The included bracket simplifies panel mounting, and the fitted gauge shows MPa/psi. If your machine may ever require more than 0.4 MPa, select the standard S type instead. For lines needing oil downstream, order the matching GAFC300-10 combination. Note that 1.0 MPa max supply leaves about 0.6 MPa above the 0.4 MPa top of the range.
Quick checklist
This is a filter and regulator only — it delivers filtered, pressure-set air with no added oil. If a downstream tool needs lubrication, add a separate lubricator or order the GAFC300-10 combination; do not expect an oil mist from this unit.
It is a filter & regulator with a 3/8in port. Pressure range is 0.15-0.4 MPa (20-58 psi), max pressure is 1.0 MPa (145 psi), proof pressure is 1.5 MPa (215 psi). Temperature range is -5 to 70 C. The drain bowl holds 60 cc, and the unit weighs 500 g. It has a 5 um element and a metal bowl.
The L type regulates pressure from 0.15 to 0.4 MPa (20-58 psi), which is lower than the standard type's 0.15-0.9 MPa range. It is suited for circuits that must not exceed 0.4 MPa. If your system might need higher pressure, choose the standard S type instead.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.