
The AirTAC GAFR Adjustable Filter Regulator GAFR300C10SNT is a genuine two-in-one filter & regulator — a diversion-type water/particulate filter and a balanced pressure regulator built into ONE body. It has 3/8" ports, a 40 µm filter element and regulates 0.15 - 0.9 MPa (20 - 130 psi). It has no lubricator, so it adds no oil to the airflow.
The GAFR300C10SNT is a filter and regulator combined into a single body, so the incoming air is cleaned and then set to a steady outlet pressure without needing separate units. This 3/8in version works across 0.15-0.9 MPa (20-130 psi) with a 40 um element, and its metal bowl suits demanding shop environments.
Because the filter and regulator share one housing, there are fewer joints to seal and less rail space consumed than with a separate GAF filter plus GAR regulator. The metal bowl holds 60 cc of condensate, and the unit weighs 500 g, which tells you it needs a proper panel or frame mount rather than support from the tubing. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac GAFR Adjustable Filter Regulator GAFR300C10SNT |
|---|---|
| Series | GAFR300 filter & regulator |
| Port size | 3/8" (NPT thread) |
| Filtering grade | 40 µm |
| Pressure range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Type | Standard |
| Bowl material | Metal |
| Drain type | Semi-auto drain + manual drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 60 cc |
| Bracket | Included |
| Weight | 500 g |
Specifications follow the official AirTAC GAFR catalogue (pages 235-236). Air must not freeze in the unit. No gauge is supplied with this model — the gauge connection on a GAFR300 is 1/8" if you add one. This unit filters and regulates only; it does not add lubrication.
| GAFR300 | GA300 series filter & regulator — sets the port range, drain-bowl capacity and weight. |
|---|---|
| C | Bowl material: Metal. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 10 | Port size 3/8". This body offers 08 = 1/4", 10 = 3/8", 15 = 1/2". |
| (blank) | Drain: Semi-auto drain + manual drain. |
| S | Standard type — 0.15 - 0.9 MPa (20 - 130 psi). This body offers Standard (S) or Lower pressure (L). |
| (blank) | Mounting bracket included. |
| N | No pressure gauge; 1/8" gauge connection. |
| (blank) | Filtering grade 40 µm. |
| T | NPT thread; gauge scale psi / bar. |
| (blank) | No reverse-flow valve. |
The filter and the regulator are ONE body here — there is no separate GAF filter or GAR regulator part to assemble. Need lubrication downstream too? Add a lubricator by ordering the matching GAFC300-10 F.R.L. combination instead.
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAFR300 · 3/8" · curve to 3500 L/min |
|---|---|
| One size down | GAFR200 |
| One size up | GAFR400 (curve to 7000 L/min) |
| Add a lubricator | GAFC300-10 (F.R.L. combination) |
Feed a 3/8in line to a small machining fixture where the combined filter-regulator cleans the air and holds a stable pressure for the clamping cylinders.
Use it at a bench assembly station with a pneumatic screwdriver or press, where the 40 um element protects the tool and the regulator keeps the force consistent.
Set a precise test pressure for a jig or gauge calibration setup, relying on the balanced regulator to hold the outlet steady as the shop supply fluctuates.
Choose the GAFR300 body when your line needs 3/8in ports and a 3500 L/min flow envelope plotted at 0.7 MPa inlet; step up to the GAFR400 if you need 1/2in ports and a 7000 L/min envelope at the same inlet pressure. The metal bowl here is a build choice with the same 1.0 MPa max and -5 to 70 C rating as PC or nylon, so confirm compatibility for aggressive surroundings. This model ships with both semi-auto and manual drains, the mounting bracket is included, and the 40 um element is the standard grade. The NPT thread means the gauge scale reads MPa/psi, though no gauge is fitted; the 1/8in gauge connection is there if you add one later. If the line needs oil downstream, order the matching GAFC300-10 combination instead. Note that 1.0 MPa max supply leaves about 0.1 MPa above the 0.9 MPa top of the range, so plan the inlet pressure near the maximum to reach the full regulated output.
Quick checklist
This is a filter and regulator only — it delivers filtered, pressure-set air with no added oil. If a downstream tool needs lubrication, add a separate lubricator or order the GAFC300-10 combination; do not expect an oil mist from this unit.
The GAFR300C10SNT is a filter and regulator in one body with a 3/8in port. The working pressure range is 0.15-0.9 MPa (20-130 psi), with a maximum pressure of 1.0 MPa (145 psi) and a proof pressure of 1.5 MPa (215 psi). The temperature range is -5 to 70 C. It has a 60 cc drain bowl and weighs 500 g, with a flow curve plotted to 3500 L/min at 0.7 MPa inlet.
The metal bowl is a build choice that offers a different physical enclosure compared to PC or nylon, but the pressure and temperature ratings are identical across all three materials. The catalogue does not publish specific impact or chemical resistance data, so confirm compatibility with your environment. This model includes both a semi-auto drain and a manual drain.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.