
The AirTAC GAFR Adjustable Filter Regulator GAFR300C10SWT is a genuine two-in-one filter & regulator — a diversion-type water/particulate filter and a balanced pressure regulator built into ONE body. It has 3/8" ports, a 5 µm filter element and regulates 0.15 - 0.9 MPa (20 - 130 psi). It has no lubricator, so it adds no oil to the airflow.
The GAFR300C10SWT is a filter and regulator combined into one body, so a single unit cleans the air and locks the outlet pressure where you set it. This 3/8in version carries a 5 um element that traps fine particles before they reach valves or cylinders, and its metal bowl suits demanding shop-floor surroundings.
Working pressure spans 0.15-0.9 MPa (20-130 psi) with a 1.0 MPa (145 psi) maximum, and the semi-auto plus manual drain gives you both automatic condensate release and a manual override. Weighing 500 g with a 60 cc drain bowl, this size class fits neatly into a compact machine build while still offering the two-in-one convenience of a filter-regulator. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac GAFR Adjustable Filter Regulator GAFR300C10SWT |
|---|---|
| Series | GAFR300 filter & regulator |
| Port size | 3/8" (NPT thread) |
| Filtering grade | 5 µm |
| Pressure range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Type | Standard |
| Bowl material | Metal |
| Drain type | Semi-auto drain + manual drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 60 cc |
| Bracket | Included |
| Weight | 500 g |
Specifications follow the official AirTAC GAFR catalogue (pages 235-236). Air must not freeze in the unit. The fitted circular gauge reads in psi / bar, set by the NPT thread code. This unit filters and regulates only; it does not add lubrication.
| GAFR300 | GA300 series filter & regulator — sets the port range, drain-bowl capacity and weight. |
|---|---|
| C | Bowl material: Metal. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 10 | Port size 3/8". This body offers 08 = 1/4", 10 = 3/8", 15 = 1/2". |
| (blank) | Drain: Semi-auto drain + manual drain. |
| S | Standard type — 0.15 - 0.9 MPa (20 - 130 psi). This body offers Standard (S) or Lower pressure (L). |
| (blank) | Mounting bracket included. |
| (blank) | Circular pressure gauge fitted. |
| W | Filtering grade 5 µm. |
| T | NPT thread; gauge scale psi / bar. |
| (blank) | No reverse-flow valve. |
The filter and the regulator are ONE body here — there is no separate GAF filter or GAR regulator part to assemble. Need lubrication downstream too? Add a lubricator by ordering the matching GAFC300-10 F.R.L. combination instead.
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAFR300 · 3/8" · curve to 3500 L/min |
|---|---|
| One size down | GAFR200 |
| One size up | GAFR400 (curve to 7000 L/min) |
| Add a lubricator | GAFC300-10 (F.R.L. combination) |
Feed a bank of precision pneumatic valves with 5 um filtered air at a stable 0.15-0.9 MPa setting, protecting fine internal clearances from particle wear.
Mount this 500 g unit on a small assembly machine frame where a separate filter and regulator would crowd the layout, using the included bracket for a secure fit.
Use the semi-auto plus manual drain on a workbench station that gets periodic checks, letting the automatic function handle routine condensate while the manual valve serves for maintenance.
Choose the GAFR300 body when you need a 3/8in port and a 500 g unit that handles flows plotted to 3500 L/min at 0.7 MPa inlet. The metal bowl (C) is a build choice with the same 1.0 MPa max and -5 to 70 C rating as PC or nylon, so confirm compatibility for aggressive environments. This model has the 5 um element for finer filtration than the standard 40 um, and the included bracket makes panel mounting straightforward. The semi-auto plus manual drain suits lines where someone checks the bowl, while the fitted gauge with MPa/psi scale matches the NPT thread. If the line needs oil downstream, order the GAFC300-10 combination instead. Max supply of 1.0 MPa leaves about 0.1 MPa above the 0.9 MPa top of the range, so plan inlet pressure near the maximum for full output.
Quick checklist
This is a filter and regulator only — it delivers filtered, pressure-set air with no added oil. If a downstream tool needs lubrication, add a separate lubricator or order the GAFC300-10 combination; do not expect an oil mist from this unit.
The GAFR300C10SWT is a filter & regulator with a 3/8in port, working pressure 0.15-0.9 MPa (20-130 psi), max pressure 1.0 MPa (145 psi), proof pressure 1.5 MPa (215 psi), temperature range -5 to 70 C, 60 cc drain bowl, and 500 g weight. It uses a 5 um element and has a metal bowl with semi-auto plus manual drain.
The C code specifies a metal bowl instead of the standard PC or optional nylon. The pressure and temperature ratings are identical across all three materials, so the choice is about build robustness for the environment. Confirm compatibility for aggressive chemicals or impacts since no specific resistance data is published.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.