
The AirTAC GAFR Adjustable Filter Regulator GAFR300C15ALJNTK is a genuine two-in-one filter & regulator — a diversion-type water/particulate filter and a balanced pressure regulator built into ONE body. It has 1/2" ports, a 40 µm filter element and regulates 0.15 - 0.4 MPa (20 - 58 psi). It has no lubricator, so it adds no oil to the airflow.
The GAFR300C15ALJNTK is a filter and regulator combined into a single body, so it cleans incoming air and stabilizes outlet pressure without needing separate units. This metal-bowl version handles a 1/2in port and uses a 40 um element to trap particles and separate liquid water through its diversion structure.
Its lower-pressure regulator is set for 0.15-0.4 MPa (20-58 psi), making it suitable for gentle or sensitive applications. The automatic drain clears condensate without manual attention, and the 60 cc bowl capacity means less frequent checking. Weighing 500 g, this unit is built for panel or frame mounting rather than being supported by tubing. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac GAFR Adjustable Filter Regulator GAFR300C15ALJNTK |
|---|---|
| Series | GAFR300 filter & regulator |
| Port size | 1/2" (NPT thread) |
| Filtering grade | 40 µm |
| Pressure range | 0.15 - 0.4 MPa (20 - 58 psi) |
| Type | Lower pressure |
| Bowl material | Metal |
| Drain type | Automatic drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 60 cc |
| Bracket | Not included (J) |
| Weight | 500 g |
Specifications follow the official AirTAC GAFR catalogue (pages 235-236). Air must not freeze in the unit. No gauge is supplied with this model — the gauge connection on a GAFR300 is 1/8" if you add one. This unit filters and regulates only; it does not add lubrication.
| GAFR300 | GA300 series filter & regulator — sets the port range, drain-bowl capacity and weight. |
|---|---|
| C | Bowl material: Metal. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 15 | Port size 1/2". This body offers 08 = 1/4", 10 = 3/8", 15 = 1/2". |
| A | Drain: Automatic drain. |
| L | Lower pressure type — 0.15 - 0.4 MPa (20 - 58 psi). This body offers Standard (S) or Lower pressure (L). |
| J | No bracket (J) — supplied without the mounting bracket. |
| N | No pressure gauge; 1/8" gauge connection. |
| (blank) | Filtering grade 40 µm. |
| T | NPT thread; gauge scale psi / bar. |
| K | Reverse-flow (reflux) valve attached. |
The filter and the regulator are ONE body here — there is no separate GAF filter or GAR regulator part to assemble. Need lubrication downstream too? Add a lubricator by ordering the matching GAFC300-15 F.R.L. combination instead.
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAFR300 · 1/2" · curve to 3500 L/min |
|---|---|
| One size down | GAFR200 |
| One size up | GAFR400 (curve to 7000 L/min) |
| Add a lubricator | GAFC300-15 (F.R.L. combination) |
Feed a delicate pressing or alignment fixture that requires gentle, consistent air pressure below 0.4 MPa. The lower-pressure regulator prevents accidental over-pressurization of sensitive tooling.
Provide clean, regulated air to a lab bench setup or test rig where fine control at low pressure is needed. The 40 um element filters particulates, and the automatic drain keeps the line clear during long experiments.
Supply a single work cell or small automated station with filtered air at a stable low pressure. The 1/2in port and 60 cc bowl suit moderate consumption without frequent maintenance.
Choose the GAFR300 body for 1/2in port applications that need moderate flow, with its flow curve plotted to 3500 L/min at 0.7 MPa inlet. The metal bowl (C) offers a robust build choice, though the common specification of 1.0 MPa max and -5 to 70 C applies to all bowl materials, so confirm compatibility for aggressive environments. This model has an automatic drain (A) for unattended or wet lines, and the lower-pressure type (L) tops out at 0.4 MPa - if the machine may ever need more, the standard type is the correct choice. The J code means no mounting bracket is included, so plan for a panel mount or existing bracket, and the N code means no gauge is supplied, though the 1/8in gauge connection is ready if you add one later. The K code indicates a reverse-flow (reflux) valve is fitted, and the NPT thread uses an MPa/psi gauge scale. If lubrication is needed downstream, order the matching GAFC300-15 combination instead. With a 1.0 MPa max supply, you have about 0.6 MPa above the 0.4 MPa top of the regulated range, giving ample inlet margin for stable regulation.
Quick checklist
This is a filter and regulator only — it delivers filtered, pressure-set air with no added oil. If a downstream tool needs lubrication, add a separate lubricator or order the GAFC300-15 combination; do not expect an oil mist from this unit.
This filter & regulator has a 1/2in port, a 0.15-0.4 MPa (20-58 psi) pressure range, a 1.0 MPa (145 psi) maximum pressure, and a 1.5 MPa (215 psi) proof pressure. It operates from -5 to 70 C, has a 60 cc drain bowl, and weighs 500 g. The element grade is 40 um, and it uses an automatic drain.
The L code designates the lower-pressure type, which regulates from 0.15 to 0.4 MPa (20-58 psi) instead of the standard 0.15-0.9 MPa range. The N code means no gauge is included, so you cannot read the set pressure without adding one to the 1/8in gauge connection. This combination suits applications that need gentle, consistent low pressure and have an external pressure display.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.