
The AirTAC GAFR Adjustable Filter Regulator GAFR300C15ALJTK is a genuine two-in-one filter & regulator — a diversion-type water/particulate filter and a balanced pressure regulator built into ONE body. It has 1/2" ports, a 40 µm filter element and regulates 0.15 - 0.4 MPa (20 - 58 psi). It has no lubricator, so it adds no oil to the airflow.
The GAFR300C15ALJTK is a filter and regulator combined in one body, saving rail space and reducing potential leak points compared to separate units. It handles a 1/2in port with a lower pressure range of 0.15-0.4 MPa (20-58 psi), filtering to 40 um.
This model features a metal bowl, an automatic drain, and a fitted circular gauge with MPa/psi scale. The reverse-flow valve is attached, and no mounting bracket is included, making it suitable for panel-mount installations where the 500 g weight can be supported by structure rather than tubing. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac GAFR Adjustable Filter Regulator GAFR300C15ALJTK |
|---|---|
| Series | GAFR300 filter & regulator |
| Port size | 1/2" (NPT thread) |
| Filtering grade | 40 µm |
| Pressure range | 0.15 - 0.4 MPa (20 - 58 psi) |
| Type | Lower pressure |
| Bowl material | Metal |
| Drain type | Automatic drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 60 cc |
| Bracket | Not included (J) |
| Weight | 500 g |
Specifications follow the official AirTAC GAFR catalogue (pages 235-236). Air must not freeze in the unit. The fitted circular gauge reads in psi / bar, set by the NPT thread code. This unit filters and regulates only; it does not add lubrication.
| GAFR300 | GA300 series filter & regulator — sets the port range, drain-bowl capacity and weight. |
|---|---|
| C | Bowl material: Metal. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 15 | Port size 1/2". This body offers 08 = 1/4", 10 = 3/8", 15 = 1/2". |
| A | Drain: Automatic drain. |
| L | Lower pressure type — 0.15 - 0.4 MPa (20 - 58 psi). This body offers Standard (S) or Lower pressure (L). |
| J | No bracket (J) — supplied without the mounting bracket. |
| (blank) | Circular pressure gauge fitted. |
| (blank) | Filtering grade 40 µm. |
| T | NPT thread; gauge scale psi / bar. |
| K | Reverse-flow (reflux) valve attached. |
The filter and the regulator are ONE body here — there is no separate GAF filter or GAR regulator part to assemble. Need lubrication downstream too? Add a lubricator by ordering the matching GAFC300-15 F.R.L. combination instead.
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAFR300 · 1/2" · curve to 3500 L/min |
|---|---|
| One size down | GAFR200 |
| One size up | GAFR400 (curve to 7000 L/min) |
| Add a lubricator | GAFC300-15 (F.R.L. combination) |
Feed a single-station assembly fixture that needs clean, regulated air at a consistent lower pressure for delicate operations like part placement or light pressing.
Provide filtered air to lab equipment that requires a stable, lower-pressure supply, such as small pneumatic actuators on test benches or sample handling systems.
Mount this regulator directly into a control panel, using the 1/2in port to feed a local manifold while the automatic drain keeps the metal bowl clear in automated cycles.
Choose this GAFR300 for 1/2in piping where a compact footprint matters; if you need higher flow, step up to the GAFR400 with its 7000 L/min plotted envelope at 0.7 MPa inlet, or down to the GAFR200 for lighter duty. The metal bowl suits demanding environments, while the automatic drain handles wet lines without manual attention. The L-type regulator tops out at 0.4 MPa, so confirm your system never needs more pressure. The J code means no bracket is supplied, and the K code adds the reverse-flow valve as an ordering difference. For lubrication downstream, order the matching GAFC300-15 combination instead. With a 1.0 MPa max supply, you have about 0.6 MPa of headroom above the 0.4 MPa regulated ceiling.
Quick checklist
This is a filter and regulator only — it delivers filtered, pressure-set air with no added oil. If a downstream tool needs lubrication, add a separate lubricator or order the GAFC300-15 combination; do not expect an oil mist from this unit.
The pressure range is 0.15-0.4 MPa (20-58 psi), with a 1.0 MPa (145 psi) maximum and 1.5 MPa (215 psi) proof pressure. Operating temperature is -5 to 70 C. The drain bowl holds 60 cc, and the unit weighs 500 g. It has a 1/2in port, 40 um element, and metal bowl.
The L code designates the lower-pressure regulator type, topping out at 0.4 MPa (58 psi) for applications needing gentle, precise pressure. The K code indicates a reverse-flow (reflux) valve is fitted; its specific function is detailed in the catalogue, but it is an ordering difference to note for your system design.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.